Since Helm is going through breaking changes with Helm v4, the version path to
Helm needs to be updated.
Signed-off-by: Matt Farina <matt.farina@suse.com>
Multiple changes were made to pass linting. Some Go built-in names
are being used for variables (e.g., min). This happens in the Go
source itself including the Go standard library and is not always
a bad practice.
To handle allowing some built-in names to be used the linter config
is updated to allow (via opt-in) some names to pass. This allows us
to still check for re-use of Go built-in names and opt-in to any
new uses.
There were also several cases where a value was checked for nil
before checking its length when this is already handled by len()
or the types default value. These were cleaned up.
The license validation was updated because it was checking everything
in the .git directory including all remote content that was local.
The previous vendor directory was from a time prior to Go modules
when Helm handled dependencies differently. It was no longer needed.
Signed-off-by: Matt Farina <matt.farina@suse.com>
Since Helm is going through breaking changes with Helm v4, the version path to
Helm needs to be updated.
Signed-off-by: Matt Farina <matt.farina@suse.com>
Multiple changes were made to pass linting. Some Go built-in names
are being used for variables (e.g., min). This happens in the Go
source itself including the Go standard library and is not always
a bad practice.
To handle allowing some built-in names to be used the linter config
is updated to allow (via opt-in) some names to pass. This allows us
to still check for re-use of Go built-in names and opt-in to any
new uses.
There were also several cases where a value was checked for nil
before checking its length when this is already handled by len()
or the types default value. These were cleaned up.
The license validation was updated because it was checking everything
in the .git directory including all remote content that was local.
The previous vendor directory was from a time prior to Go modules
when Helm handled dependencies differently. It was no longer needed.
Signed-off-by: Matt Farina <matt.farina@suse.com>
- replace os.IsNotExist with errors.Is and fs.ErrNotExist
- use %w directive
Signed-off-by: Justen Stall <39888103+justenstall@users.noreply.github.com>
The output of helm get metadata includes a subset of the fields contained in
the chart.Metadata struct. This change adds the values of the annotations field
and the dependencies field to the output.
Signed-off-by: Niladri Halder <niladri.halder26@gmail.com>
golangci-lint passed when last commit was made on #12876, but has since failed.
This is probably because the linter has since updated.
I ran locally with the same version of golangci-lint we run in GH Actions, and
this is the only error now (an additional linting error in
pkg/action/package.go since #12876 has already been fixed.
```sh
curl -sSfL https://raw.githubusercontent.com/golangci/golangci-lint/master/install.sh | sh -s v1.58.1
./bin/golangci-lint run pkg/action/...
./bin/golangci-lint run ./...
```
we should be good now.
Signed-off-by: Scott Rigby <scott@r6by.com>
When --skip-schema-validation is set, any schema contain in the helm chart is ignored. Defaults to 'false'.
Closes#10398
Signed-off-by: anessi <16045045+anessi@users.noreply.github.com>
Allow the SDK actions to adopt existing resources. This allows install
and update to overwrite resources. If TakeOwnership is not set, adoption
is only possible if they existing resources have the right labels
(managed-by) and annotations (release-name, ...).
Signed-off-by: Mario Manno <mmanno@suse.com>
This change adds a new flag to the install and upgrade commands in
the Helm client and properties to the install and upgrade action.
The new flag is --hide-secret and can only be used with the
--dry-run flag.
The --dry-run flag is designed to send all chart rendered manifests to
stdout so that they can be inspected.
When the --hide-secret flag is used the Secret content is removed from
the output.
Signed-off-by: Matt Farina <matt.farina@suse.com>
When username/password parameters are passed in via the CLI
they are not passed down to the client handling requests to
OCI registries. This change ensures this happens
Signed-off-by: Evans Mungai <mbuevans@gmail.com>
Noteis:
1. This moves golangci scanning to a GitHub action. This will
enable inline pointers to issues in the PR where linting fails.
2. Go 1.21 is specified in the go.mod because Kubernetes libs
require it.
3. The lint issues were removed. Some were fixed while others
were handled by skipping linting or using _ as an argument.
Many of these can be refactored later for better cleanup.
Signed-off-by: Matt Farina <matt.farina@suse.com>
This commit replaces `ensure.TempDir` with `t.TempDir` in tests. The
directory created by `t.TempDir` is automatically removed when the test
and all its subtests complete.
Prior to this commit, temporary directory created using `ensure.TempDir`
needs to be removed manually by calling `os.RemoveAll`, which is omitted
in some tests. The error handling boilerplate e.g.
defer func() {
if err := os.RemoveAll(dir); err != nil {
t.Fatal(err)
}
}
is also tedious, but `t.TempDir` handles this for us nicely.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
There are a few changes to the new dry-run handling:
1. Some documentation is added to help clarify what is happening
and what is expected.
2. DryRun is never changed by internal handling. If an API user
sets the property it is not changed by our code.
3. The behavior on contacting the server with false/none is made
consistent between install and upgrade.
Signed-off-by: Matt Farina <matt.farina@suse.com>
Some charts don't need a templates directory. The warning appears to originate back when helm expected all charts to contain templates. In CI situations where linting is performed with --strict the lint warning causes unneccessary failures for charts that quite legitimately do not contain a templates directory.
As discussed in #8033 there are no longer any scenarios understood where this warning is helpful so this commit removes it.
Signed-off-by: James Blair <mail@jamesblair.net>
First, some notes about priority and how some code flow works.
For Helm handling values, the expected order of precidence is:
1. User specified values (e.g CLI)
2. Imported values
3. Parent chart values
4. Subchart values
Helm handles dependency values slightly differently. If there are dependencies
in the charts folder that are not marked as dependencies all of the values,
including nil values, are pulled in. If those charts are listed as a
dependency in the Chart.yaml file than they are processed for import handling.
Prior to the changes here, it caused nil values at the top level to NOT remove
values specified.
The changes:
1. The order of priority was chagned from the list above. Parnet chart values
would override specifically imported values. This is due to a change from
just over a year ago that introduced a bug. That was undone by changing the
precidence when maps were merged.
2. To handle merging while retaining the nil values, which was causing
inconsistent behavior, a new set of Merge functions were introduced. These
functions are just like coalesce except that they DO NOT remove nil/null values.
The new functions are used in a backward compatible manner meaning some new
functions were introduced that called them.
Specific issues fixed (that are known):
Closes#9027
Can now delete subkeys from charts when specified in the parent. This behavior
was previously inconsistent. Sometimes they could be deleted and other times
it did not work. Now it is consistent.
Closes#10899
Imported values (from library or other subcharts) are now used following the
order above.
The previous behavior was inconsistent. import-values using just a string
would import them. When named with a child/parent it did not work if the
parent already had a value. If string and named were mixed the imports
worked if the string happened first but just for the string not the named.
If the named parent/child went first then none of them worked for cases
where the parent already had a value. It was inconsistent and the tests
sometimes mirrored the functionality rather than expected behavior.
Tests for this fall into the sub-packages and are in the template tests
to verify it's happening in the output. Including having values passed
at the CLI as the ultimate highest priority to be used.
This relates to a fix that went in for #9940. The expected values there don't
fit the precedence above where the parent value would override the imported
value. That fix/change introduced more bugs.
Closes#10052
This is the case where imported values using the parent/child designation
just didn't work right. That has been fixed and there are tests. The underlying
issue had to do with the precedence order handling.
Note, a lot of tests were added. Hope we got it more right this time.
Signed-off-by: Matt Farina <matt.farina@suse.com>
Add a new flag `--plain-http` to the following commands:
* `helm install`
* `helm pull`
* `helm push`
* `helm template`
* `helm upgrade`
* `helm show`
This flag instructs the registry client to use plain HTTP connections,
thus enabling upload/download of charts from OCI registries served at
an HTTP endpoint.
Signed-off-by: Sanskar Jaiswal <jaiswalsanskar078@gmail.com>
During the install process there was a place where an install
process could be stuck trying to write to a channel. This would
happen when a context had completed prior to performInstall
finishing. In a short running Helm Client this was not a problem.
But, for long running applications that use Helm as an SDK there
are problems where a memory leak ends up happening due to
goroutines never being able to complete.
This fix provides a means for performInstall to write to its
channel using the method already used to fix the upgrade
issue of the same kind.
Fixes#11805
Signed-off-by: Matt Farina <matt.farina@suse.com>
When a helm command is run with the --dry-run flag, it will try to connect to the cluster
if the value is 'server' to be able to render lookup functions.
Closes helm#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
At this time both Go 1.19 and 1.20 are supported. The version
specified in the go.mod file is the minimum version we expect Helm
to be compiled against. This is the oldest supported version to
support environments where others compile Helm. The Helm project
is using Go 1.20 to build Helm itself.
Updating to Go 1.19 also includes dealing with io/ioutil
deprecation and some additional linting issues around staticcheck.
All the staticcheck issues were in test files so linting was
skipped for those.
Signed-off-by: Matt Farina <matt.farina@suse.com>
When a helm command is run with the --dry-run flag, it will try to connect to the cluster
if the value is 'server' to be able to render lookup functions.
Closes helm#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
As the CRDs are installed before the capabilities are gathered, the
current call to invalidate the discovery client is premature and
expensive.
What actually is required is an invalidation of the REST mapper, as
otherwise the Helm install action may later on fail with a `resource
mapping not found` error. More specifically when the caller of the
action is making use of a persisting[1] `RESTClientGetter`.
Which is not something done by the Helm CLI (albeit it could, and this
would potentially save quite some resources?). But is a default
configuration offered by the Helm SDK via `kube.New` when a nil value
is provided as the `getter`.
[1]: https://github.com/kubernetes/cli-runtime/blob/v0.26.2/pkg/genericclioptions/config_flags.go#L118
Signed-off-by: Hidde Beydals <hidde@hhh.computer>
If enabled the registryClient is set using a helper that accepts the TLS
flags. This keeps the client creation consistent accross the different
commands.
Signed-off-by: Soule BA <bah.soule@gmail.com>
If implemented, users will be able to use custom certificates and CA to
while interacting with OCI registries.
Signed-off-by: Soule BA <bah.soule@gmail.com>
Add --cascade=<background|foreground|orphan> option to helm uninstall
Current behaviour is hardcoded to background
Addresses issue: https://github.com/helm/helm/issues/10586
Signed-off-by: MichaelMorris <michael.morris@est.tech>
When a helm command is run with the --dry-run flag, it will try to connect to the cluster
if the value is 'server' to be able to render lookup functions.
Closes#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
When a helm command is run with the --dry-run flag, it will try to connect to the cluster
if the value is 'server' to be able to render lookup functions.
Closes#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
When a helm command is run with the --dry-run flag, it will try to connect to the cluster
if the value is 'server' to be able to render lookup functions.
Closes#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
When a helm command is run with the --dry-run-option=server flag, it will try to connect to the cluster
to be able to render lookup functions.
Closes#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
When a helm command is run with the --dry-run-option=server flag, it will try to connect to the cluster
to be able to render lookup functions.
Closes#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
When a helm command is run with the --dry-run flag, it will try to connect to the cluster
if the value is 'server' to be able to render lookup functions.
Closes#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
When a helm command is run with the --dry-run flag, it will try to connect to the cluster
if the value is 'server' to be able to render lookup functions.
Closes#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
When a helm command is run with the --dry-run flag, it will try to connect to the cluster
if the value is 'server' to be able to render lookup functions.
Closes helm#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
When a helm command is run with the --dry-run flag, it will try to connect to the cluster
to be able to render lookup functions.
Closes#8137
Signed-off-by: Tapas Kapadia <tapaskapadia10@gmail.com>
Fixes#11712
A change was made that when validation was turned off the Kubernetes
packages were building objects as a Table type. This was done for
display purposes. When details about the objects was going to be
printed as part of #10912.
This broke rollback, and possibly other functionality, as a Table
type was returned in some cases that needed the regular object.
This caused things to break silently.
The fix involved adding in a new Function (and interface) to
query for tables instead of the objects themselves. There was not
a clean way to add it to the existing function that covered all
cases.
A second problem was noticed along the way. When data was output
via status as YAML or JSON it was in the form of a table rather
than the objects themselves. This did not reflect expectations
and did not match the functionality in kubectl. The code was
updated to return a table when that was presented and the objects
when they are being output for YAML or JSON. The API also supports
this handling to SDK users can replicate this functionality.
API changes made here were never released. The functions were
developed for this release of Helm and only ever appeared in an
RC. In this case, they can be changed.
Signed-off-by: Matt Farina <matt.farina@suse.com>
Extend Interface with new InterfaceResources to avoid breaking changes
Move change to staus command behind --show-resources flag
Signed-off-by: Soujanya Mangipudi <somangip@microsoft.com>
Creating a new PR based on this existing stale PR https://github.com/helm/helm/pull/7728
Signed-off-by: Soujanya Mangipudi <somangip@microsoft.com>
# Conflicts:
# go.sum
Confirm that the current and updated revision numbers also match as part
of the readiness check. Add coverage for readiness scenarios where
StatefulSet status does not reflect the most recent generation of the
StatefulSet yet.
Also add additional logging around the sts transitions from non-ready to
ready.
Fixes: #10163
Signed-off-by: Dominic Evans <dominic.evans@uk.ibm.com>
The directory created by `T.TempDir` is automatically removed when the
test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Quiet flag reduce the verbosity, such that the only text
that is written to the console is lint warnings/errors
Closes#9994
Signed-off-by: Piotr Resztak <piotr.resztak@gmail.com>
When range support for OCI went in via #10527 it created a situation
where some lookups for a chart could cause a panic. This change
makes sure the registry client is available to lookup OCI charts
Signed-off-by: Matt Farina <matt.farina@suse.com>
If set, 'uninstall' command will wait until all the resources are deleted before returning.
It will wait for as long as --timeout
closes#2378
Signed-off-by: Mike Ng <ming@redhat.com>
George Jenkins
petercover
Robert Sirchia
Austin Abro
Payal Godhani
Matt Farina
Terry Howe
Scott Rigby
Evans Mungai
Justen Stall
KISHOREKUMAR THUDI
mathieu cesbron
Suleiman Dibirov
wangjingcun
Niladri Halder
Nathan Baulch
Joe Julian
anessi
Alex Johnson
Andrew Block
Marcin Owsiany
Mario Manno
Antoine Deschênes
Daniel Pap
Matt Farina
Marcin Chojnacki
Miles Wilson
b4nks
Michał Słapek
Bingtan Lu
ithrael
satoru
Mikhail Kopylov
Dmitry Chepurovskiy
Eng Zer Jun
James Blair
wujunwei
Sanskar Jaiswal
Tapas Kapadia
AdamKorcz
Hidde Beydals
Craig O'Donnell
Soule BA
zak905
MichaelMorris
Vaibhav Sharma
Soujanya Mangipudi
cui fliter
Martin Hickey
Dominic Evans
Dmitry Chepurovskiy
Matthew Fisher
Mayank Thakur
Graham Reed
stan-sz
yxxhero
alexandr.danilin
Piotr Resztak
David Peraza
Thomas Runyon
mengjiao.liu
Neven Miculinic
Simon Alling
Jerome Küttner
cndoit18
Moritz Clasmeier
Timofey Kirillov
Guangwen Feng
Alexey Igrychev
Josh Dolitsky
Mike Ng
John Howard