With Cobra 1.0, it is now possible to control when file completion
should or should not be done. For example:
helm list <TAB>
should not trigger file completion since 'helm list' does not accept
any arguments.
This commit disables file completion when appropriate and adds tests to
verify that file completion is properly disabled.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
When #8156 was merged it had the side effect that all hooks were
run all the time. All the hooks were put in the flow of the
content rendered and sent to Kubernetes on every command.
For example, if you ran the following 2 commands the test hooks
would run:
helm create foo
helm install foo ./foo
This should not run any hooks. But, the generated test hook is run.
The change in this commit moves the writing of the hooks to output
or disk back into the template command rather than in a private
function within the actions. This is where it was for v3.2.
One side effect is that post renderers will not work on hooks. This
was the case in v3.2. Since this bug is blocking the release of v3.3.0
it is being rolled back. A refactor effort is underway for this section
of code. post renderer for hooks should be added back as part of that
work. Since post renderer hooks did not make it into a release it
is ok to roll it back for now.
There is code in the cmd/helm package that has been duplicated from
pkg/action. This is a temporary measure to fix the immediate bug
with plans to correct the situation as part of a refactor
of renderResources.
Signed-off-by: Matt Farina <matt@mattfarina.com>
* fix(sdk): Polish the downloader/manager package error return
Close#8471
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
* Modify the repositories validation function `resloveRepoNames` and add a
unit test.
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
* Remove wrong commit
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
No longer using the 'syscall' package, as further reading into this
issue has shown that 'syscall' is deprecated/locked down. Additional
issues posted on Golang's github indicates that the newer preferred
mechanism to get the file descriptor for stdin is: int(os.Stdin.Fd())
Signed-off-by: Jack Weldon <jack.weldon.scm@gmail.com>
Previously in Helm 2, 'helm repo add' would prompt for your password if
you only provided the --username flag. This helps prevent someone's
credentials from being logged in their shell's history, from showing
up in process lists, and from being seen by others nearby.
Closes#7174
Signed-off-by: Jack Weldon <jack.weldon.scm@gmail.com>
* fix(template):Issue:helm template with --output-dir doesn't write template with a hook to file
Close#7836
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
* fix go file style
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
* fix go file style
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
The warnings introduced when a chart has been deprecated is displayed on standard out. This is a regression for users piping the output of `helm template` from a deprecated chart to `kubectl`. This changes the error message to display on standard error instead.
Signed-off-by: Matthew Fisher <matt.fisher@microsoft.com>
This commit allows to use shell completion to obtain the list of
available versions of a chart referenced in a 'repo/chart' format.
It applies to:
- helm install
- helm template
- helm upgrade
- helm show
- helm pull
The 'repo/chart' argument must be present for completion to be triggered
(or else we don't yet know which chart to fetch the versions for).
The completion can be slow for the 'stable' repo because its index
file takes some time to parse.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
Making each shell a subcommand of the 'completion' has multiple
advantages:
- simplifies the code,
- allows to have different flags for each shell,
for example, a future `--no-descriptions` flag for fish only,
- allows to tailor the help text per shell.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
Cobra 1.0 introduces custom Go completions. This commit replaces Helm's
own solution to use Cobra's solution.
This allows to completely remove Helm's internal "completion" package.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
The flags added by addChartPathOptionsFlags() are used for
`helm install` and `helm upgrade` but also for `helm template`,
`helm show` and `helm pull`. Because of the latter three, we should not
use the word 'install' in the description of the --version and --verify
flags.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
Having both the `showCmd` and the `subCmd` passed to `addShowFlags()`
can easily lead to mistakes in using the wrong command.
Instead, `addShowFlags()` should only focus on the `subCmd`
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
Persistent flags are available on subcommands. Status does not
need the persistent nature.
Closes#8149
Signed-off-by: Matt Farina <matt@mattfarina.com>
Fix `repo add` and `repo update` to use a repository cache set
using `--repository-cache` flag
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
Signed-off-by: Trond Hindenes <trond@hindenes.com>
Cobra 1.0.0 introduces support for Custom Go Completions. However,
there is a small difference compared to helm's existing solution.
The difference is that Cobra will not complete sub-commands if there
are any dynamic completion functions registered.
The way helm implemented plugin completions had the dynamic completion
function associated with the root plugin command (e.g. 2to3); with
Cobra, this prevents any of the sub-commands of the plugin to be
completed (i.e., 2to3 <TAB> will not show the static sub-commands).
The solution is to only register the dynamic completion function for a
plugin command that doesn't have any further sub-commands. This allows
all sub-commands to be completed properly, and when there are no more
levels of sub-commands, the dynamic completion is called.
This commit had to make two changes to achieve this:
1- refactor the load_plugins.go file to extract the logic to call
the plugin.complete executable (for dynamic completions), so that
it could be added to each final sub-command.
2- load the static completion not only for the "completion" command like
before, but also for the "__complete" command, so that when the
__complete command is called for dynamic completion of a sub-command,
it is aware of the sub-command in question.
The second change is also valuable for the future support of completion
for the Fish shell. Completion for the fish shell uses the __complete
command not only for dynamic completions but also for basic command and
flag completion. This implies that the __complete command must be aware
of the plugins sub-commands, and therefore that the plugin's static
completion be loaded.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
A chart being installed which only contains CRDs and not
any templates tries to install the resources by default.
The resourceList which is used in this case does not check
if there are resources present in it or not. This commit
adds checks to those particular places where we need to check
if the size of resourceList > 0 during installation and deletion.
Signed-off-by: Vibhav Bobade <vibhav.bobde@gmail.com>
Helm had been exposing XDG based variables to end users. This lead
to confusion. For example, if a user wanted to change the cache
location Helm used should they change the XDG variable? Since this
would be like changing the HOME environment variable the answer
is no.
This change adds HELM_*_HOME environment variables to be used
in addition to XDG ones of the same name. Helm will now look
for the Helm specific variable. If not set, Helm will fall
back to XDG locations. If those are not set a default location
will be used. This keeps XDG in use as a default when present,
provides users with the ability to set the location, and removes
XDG from being exposed to end users to avoid confusion.
Closes#7919
Signed-off-by: Matt Farina <matt@mattfarina.com>
* Prints empty repolist in json/yaml if there are no repos and output format is given as json/yaml rather that printing the error msg "no repositories to show"
Signed-off-by: Anshul Verma <anshulvermapatel@gmail.com>
* Prints empty repolist in json/yaml if there are no repos and output format is given as json/yaml rather that printing the error msg "no repositories to show"
Signed-off-by: Anshul Verma <anshulvermapatel@gmail.com>
After the introduction of lazy loading of the Kubernetes client as part
of PR #7831, there is no longer a need to protect against an incomplete
--kube-context value when doing completion.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
Upgrade Kubernetes libraries to v0.18.0
Add new lazy load KubernetesClientSet to avoid missing kubeconfig error
In kubernetes v1.18 kubeconfig validation was added. Minikube and Kind
both remove kubeconfig when stopping clusters. This causes and error
when running any helm commands because we initialize the client before
executing the command.
Signed-off-by: Adam Reese <adam@reese.io>
* fix: fixed bug in Dependency.List()
A bug in Dependency.List() caused all compressed charts to flag their dependencies as "missing".
Closes#4431
Signed-off-by: Matt Butcher <matt.butcher@microsoft.com>
* removed some files from test fixtures
Signed-off-by: Matt Butcher <matt.butcher@microsoft.com>
The 'helm upgrade' command was not checking if the cluster was reachable.
Also, 'helm upgrade --install' first checks if the release exists
already. If that check fails there is no point in continuing the
upgrade. This optimization avoids a second timeout of 30 seconds when
trying to do the upgrade.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
* fix: add new static linter and fix issues it found
Signed-off-by: Matt Butcher <matt.butcher@microsoft.com>
* fixed two additional linter errors.
Signed-off-by: Matt Butcher <matt.butcher@microsoft.com>
This complements the verification output fixed in #7706. On verify
there should be some detail about the verification rather than
no information.
Signed-off-by: Matt Farina <matt@mattfarina.com>
When using the --verify flag on the pull command the output was
an internal Go object rather than useful detail. This is a bug.
The output new displays who signed the chart along with the
hash.
Fixes#7624
Signed-off-by: Matt Farina <matt@mattfarina.com>
The memory driver is used for go tests. It can also be used from the
command-line by setting the environment variable HELM_DRIVER=memory.
In the latter case however, there was no way to pre-provision some
releases.
This commit introduces the HELM_MEMORY_DRIVER_DATA variable which
can be used to provide a colon-separated list of yaml files specifying
releases to provision automatically.
For example:
HELM_DRIVER=memory \
HELM_MEMORY_DRIVER_DATA=./testdata/releases.yaml \
helm list --all-namespaces
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
For each plugin, helm registers a ValidArgsFunction which the completion
script will call when it needs dynamic completion. This
ValidArgsFunction will setup the plugin environment and then call the
executable `plugin.complete`, if it is provided by the plugin.
The output of the call to `plugin.complete` will be used as completion
choices. The last line of the output can optionally be used by the
plugin to specify a completion directive.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
Allow plugins to optionally specify their sub-cmds and flags through a
simple yaml file.
When generating the completion script with the command
'helm completion <bash|zsh>' (and only then), helm will look for that
yaml file in the plugin's directory. If the file exists, helm will
create cobra commands and flags so that the completion script will
handle them.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
This is a copy of the --disable-openapi-validation flag from the install command as introduced by Matthew Fisher.
See commit 67e57a5fbb
It allows upgrading releases without the need to validate the Kubernetes OpenAPI Schema.
Signed-off-by: Sebastian Voinea <sebastian.voinea@gmx.de>
For commands using the new post-render flag, the completion for the
--output flag was broken.
For example:
helm install -o <TAB>
__helm_handle_reply:47: command not found: __helm_output_options
The bash __helm_output_options function is no longer used but was
referred to by mistake.
This commit removes the offending code.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
The unit test added to cover #7233 was causing changes to show up in git
when tests were ran. This was due to the dependency build creating a new
tarball. These changes would cause a dirty build when we build our major
versions, so I removed the subchart tarball from git and added the charts
folder for that test chart to the gitignore to avoid any future problems.
Based on all I can see, this should have any impact on the test itself
Signed-off-by: Taylor Thomas <taylor.thomas@microsoft.com>
* Fix issue with apiVersion v1 lock digest
When apiVersion v1 chart dependencies are built with Helm 2
and then built with Helm 3, the lock digests differ. To avoid
this issue, a depdendency update is forced.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Check against Helm v2 hash
Handle scenario where dependency hash was generated by Helm v2
but need to do a dependency build with Helm v3.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Add unit test
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Refactor unit test
Refactor unit test to use an existing chart as dependency
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Update after review
Comments:
- https://github.com/helm/helm/pull/7261#discussion_r373827088
- https://github.com/helm/helm/pull/7261#discussion_r373827250
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Allow template output to use release name
helm template output command uses the chart name only when writing
templates to disk. This changes will also use the release name
to avoid colloiding the path when output nore than one release
of smae chart.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Update after review
Comment:
- https://github.com/helm/helm/pull/7503/files#r374130090
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
When doing zsh completion, the -n flag would not be handled properly.
Doing
helm -n<TAB>
would not add the space after the -n.
This was caused by the fact that the -n flag was being swallowed by
the echo command.
To fix this, we use printf instead.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
These flags snuck in through a feature that was reverted and removed in Helm 2, but snuck into Helm 3.
They were never hooked up or used, so they were a no-op. This shouldn't affect anyone.
Signed-off-by: Matthew Fisher <matt.fisher@microsoft.com>
* Fixes#6713 Friedly error message
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
* Fixes#6713 Friedly error message
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
* chaging error to no such file or directory
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
* changed it for the wider stat error messages which comes directly from go standard library.
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
* changed it for the wider stat error messages which comes directly from go standard library.
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
Martin Hickey
Ling Samuel
knrt10
Yuchen Cheng
Marc Khouzam
Dmitry Chepurovskiy
Matt Butcher
Matt Farina
Holder
Simon Shine
wawa0210
Cristian Klein
Jack Weldon
Matthew Fisher
ShenXinkang
Eitan Yarmush
Adam Reese
Thomas O'Donnell
Alan Zhu
Maksim Kochkin
Liu Ming
Vibhav Bobade
Matthias Riegler
Lüchinger Dominic
Anshul Verma
Adam Reese
Matthew Morrissette
Elliot Maincourt
Andreas Lindhé
Mario Valderrama
Jon Leonard
Anshul Verma
Matthias Riegler
Evgenii Iablokov
Xiangxuan Liu
Pavel Macík
akash-gautam
Zhou Hao
Sebastian Voinea
Reinhard Naegele
Taylor Thomas
Mike Tougeron
Karuppiah Natarajan
Nick Lee
Lee Bontecou