Note, there is OCI handling later in the funtion that should
handle the situation instead.
Closes#10534
Signed-off-by: Matt Farina <matt.farina@suse.com>
Before this change, several of the potential errors during the process
of signing a package were skipped.
Crucially, `Close()`ing the ReadCloser from the gpg clearsigner is the call
which actually does the signing, and so has several points of failure
which are ignored; for example, if there's a problem with the format of
the key.
Also changes the error from messageBlock() to be propagated rather than
being swallowed, and adds a test for the case where a signer fails to
sign.
Signed-off-by: Ashley Davis <ashley.davis@jetstack.io>
The partition value can be greater than number of replicas, in that
case no pods are rolled out. The expectedReplicas becomes a negative
number.
https://kubernetes.io/docs/concepts/workloads/controllers/statefulset/#partitions
In the cases where the update does not change anything in the pod
template, the updatedReplicas value from StatefulSet status remains
unchanged. Such updates can still set some partition value, and
UpdatedReplicas is always greater than expectedReplicas. Basically,
the StatefulSet is ready / rolled-out.
In both the above scenarios, providing `--wait` flag causes it to
timeout waiting indefinitely. Because updatedReplicas can never be
negative, or be equal to the expectedReplicas for the second case.
This commit handles both the scenarios by checking if UpdatedReplicas
is smaller than expectedReplicas. If it is, then the StatefulSet is
not ready yet.
Based on the code from kubectl rollout:
a450ebd59c/pkg/polymorphichelpers/rollout_status.go (L138-L141)Closes#8674
Signed-off-by: Bhavin Gandhi <bhavin7392@gmail.com>
This bug came about because of three issues that this change
corrects:
- The CI scripts run on a pull request did not test building
Helm. This means that a failure to set a variable using LDFLAGS
had no opportunity to be caught.
- #8608 provided a means to match the k8s version used in linting
and chartutil with the version of the package we pull in. With
one problem. It attempts to set a const as if it were a string.
This is ignored and everyone missed it.
- #10325 moved those constants to vars so it could be set. This
looked good and passed tests but missed that you can't set an
int as if it were a string. See first bullet.
This change fixes this by moved the internal representation to
be a string. These are internal variables not exposed in the public
API which makes this change non-breaking to the API.
Closes#10367
Signed-off-by: Matt Farina <matt.farina@suse.com>
When running helm lint, import-values for dependencies are ignored,
also added test for linting chart with import-values
Closes#9658
Signed-off-by: Stuart Drennan <stuart.drennan@gmail.com>
Problem: the warnings don't give enough details about which
values are problematic, only the name of the leaf key. This is
all the more annoying when you have a chart depending on other charts.
```
mainchart
|
+- subchart1
+- subchart2
+- subchart3
```
Here are some warnings I get before the change:
```
coalesce.go:199: warning: destination for credentials is a table. Ignoring non-table value
coalesce.go:160: warning: skipped value for resources: Not a table.
coalesce.go:160: warning: skipped value for googleSheetsServiceAccount: Not a table.
coalesce.go:199: warning: destination for googleSheetsServiceAccount is a table. Ignoring non-table value
coalesce.go:199: warning: destination for resources is a table. Ignoring non-table value []
coalesce.go:199: warning: destination for credentials is a table. Ignoring non-table value
coalesce.go:199: warning: destination for credentials is a table. Ignoring non-table value
coalesce.go:160: warning: skipped value for resources: Not a table.
coalesce.go:160: warning: skipped value for googleSheetsServiceAccount: Not a table.
```
with fix:
```
coalesce.go:162: warning: skipped value for subchart1.resources: Not a table.
coalesce.go:162: warning: skipped value for subchart2.googleSheetsServiceAccount: Not a table.
coalesce.go:211: warning: destination for subchart3.aws.credentials is a table. Ignoring non-table value ()
coalesce.go:211: warning: destination for mainchart.subchart3.aws.credentials is a table. Ignoring non-table value ()
coalesce.go:211: warning: destination for mainchart.subchart2.googleSheetsServiceAccount is a table. Ignoring non-table value ()
coalesce.go:211: warning: destination for mainchart.subchart1.resources is a table. Ignoring non-table value ([])
coalesce.go:162: warning: skipped value for subchart1.resources: Not a table.
coalesce.go:162: warning: skipped value for subchart2.googleSheetsServiceAccount: Not a table.
coalesce.go:211: warning: destination for subchart3.aws.credentials is a table. Ignoring non-table value ()
```
Signed-off-by: Damien Nozay <damiennozay+github@gmail.com>
add tests
Signed-off-by: Damien Nozay <damiennozay+github@gmail.com>
Problem: the warnings don't give enough details about which
values are problematic, only the name of the leaf key. This is
all the more annoying when you have a chart depending on other charts.
```
mainchart
|
+- subchart1
+- subchart2
+- subchart3
```
Here are some warnings I get before the change:
```
coalesce.go:199: warning: destination for credentials is a table. Ignoring non-table value
coalesce.go:160: warning: skipped value for resources: Not a table.
coalesce.go:160: warning: skipped value for googleSheetsServiceAccount: Not a table.
coalesce.go:199: warning: destination for googleSheetsServiceAccount is a table. Ignoring non-table value
coalesce.go:199: warning: destination for resources is a table. Ignoring non-table value []
coalesce.go:199: warning: destination for credentials is a table. Ignoring non-table value
coalesce.go:199: warning: destination for credentials is a table. Ignoring non-table value
coalesce.go:160: warning: skipped value for resources: Not a table.
coalesce.go:160: warning: skipped value for googleSheetsServiceAccount: Not a table.
```
with fix:
```
coalesce.go:162: warning: skipped value for subchart1.resources: Not a table.
coalesce.go:162: warning: skipped value for subchart2.googleSheetsServiceAccount: Not a table.
coalesce.go:211: warning: destination for subchart3.aws.credentials is a table. Ignoring non-table value ()
coalesce.go:211: warning: destination for mainchart.subchart3.aws.credentials is a table. Ignoring non-table value ()
coalesce.go:211: warning: destination for mainchart.subchart2.googleSheetsServiceAccount is a table. Ignoring non-table value ()
coalesce.go:211: warning: destination for mainchart.subchart1.resources is a table. Ignoring non-table value ([])
coalesce.go:162: warning: skipped value for subchart1.resources: Not a table.
coalesce.go:162: warning: skipped value for subchart2.googleSheetsServiceAccount: Not a table.
coalesce.go:211: warning: destination for subchart3.aws.credentials is a table. Ignoring non-table value ()
```
Signed-off-by: Damien Nozay <damiennozay+github@gmail.com>
add tests
Signed-off-by: Damien Nozay <damiennozay+github@gmail.com>
This is a regression accidently introduced in #9957.
A delete call had been used on the Template key of vals. This caused
a condition where Template was not available when rendering via tpl.
The delete happened after ExecuteTemplate so the issue is surpsising.
It may possibly be a race condition. Existing tests did not catch it.
I tried to create a test that directly tested the issue and was
unable to replicate the error seen with real charts. This leads me
to believe it is a race condition in the underlying Go template
package.
The delete call was not there before #9957. It should be safe to
remove and keep that information.
Closes#10082
Signed-off-by: Matt Farina <matt.farina@suse.com>
If set, 'uninstall' command will wait until all the resources are deleted before returning.
It will wait for as long as --timeout
closes#2378
Signed-off-by: Mike Ng <ming@redhat.com>
This refactor cleans up downloadAll's validation, download, and save
logic:
1. A temporary directory is created, and removed after all references to
the struct have been dropped via `defer`
2. Any local dependencies in the `charts` directory are kept intact and validated
3. Charts that have been updated are moved to the `charts` directory
This refactor has a number of improvements, including:
- tmpCharts is removed after execution
- no remote charts are downloaded to destPath: they are all pulled into
tmpPath, validated, then moved to destPath
- lots of code cleanup/improvements, like the `if` block checking
whether the `charts` directory was actually not a directory. In some
cases it could be checking a `nil` object, causing a runtime panic.
- the cyclomatic complexity of the code was simplified
- extra (and in some cases, dangerous) calls to `os.RemoveAll` have been
refactored, cleaning the code and preventing certain failure cases.
A test has been provided to demonstrate the tmpCharts removal issue has
been fixed.
Signed-off-by: Matthew Fisher <matt.fisher@microsoft.com>
This subcommand will display manifests under `crds/` if some exist.
This also changes the behaviour of `show all` to include CRDs.
Signed-off-by: Mario Valderrama <woldy401@gmail.com>
The templating engine handles errors originating from the `required` and
`fail` template functions specially, cleaning up the error messages to
be more presentable to users. Go's text/template package unfortunately
does not make this straightforward to implement. Despite
template.ExecError implementing Unwrap, the error value returned from
the template function cannot be retrieved using errors.As. The wrapped
error in ExecError is a pre-formatted error string with the template
function's error string interpolated in with the original error value
erased. Helm works around this limitation by delimiting the
template-supplied message and extracting the message out of the
ExecError string with a regex.
Fix the parsing of `required` and `fail` error messages containing
newlines by setting the regex flag to make `.` match newline characters.
Signed-off-by: Cory Snider <csnider@mirantis.com>
Fix typos
Remove condition arround time.Sleep
Because a negative or zero duration causes Sleep to return immediately.
Signed-off-by: Stephane Moser <moser.sts@gmail.com>
Rename the package time
Redesgin the logic to make a FakeKubeClient wait for a ammount time.
Remove unneed logic in the PrintingKubeClient
Signed-off-by: Stephane Moser <moser.sts@gmail.com>
The 'helm.sh/resource-policy' annotation is only supported on top level
objects. The annotation is ignored if given on a nested object within a
list.
Ref #9829
Signed-off-by: Adam Reese <adam@reese.io>
Implement timer in the fake.go and printer.go to simulate the wait period
Add test Upgrade Release when it is interruped with SIGINT
Signed-off-by: Stephane Moser <moser.sts@gmail.com>
Replicate the same logic in that was implementd in the upgrade action to handle SIGINT
Rename mutexes to isolate the variables
Signed-off-by: Stephane Moser <moser.sts@gmail.com>
Use mutex to lock the action to report the upstream function
Wrap logic to report to upstream function in the function reportToPerformUpgrade
Signed-off-by: Stephane Moser <moser.sts@gmail.com>
Change the logic to release Upgrade to handle SIGTERMs
Extract logic to 2 goroutine so it is possible to handle SIGTERMS and the release flow
Fix go style
Signed-off-by: Stephane Moser <moser.sts@gmail.com>
The URL passed to the getter for WithURL needs to be a full URL
rather than a chart reference used at the CLI. For example,
bitnami/wordpress can point to the wordpress chart in the bitnami
repo where the bitnami repo is at https://charts.bitnami.com.
WithURL needs the full URL to the repo and not bitnami/wordpress.
This is important because getters use the full URL information.
In this case the http getter uses the host name for SNI handling.
Before this change WithURL was being set to the chart reference
instead of the URL. This was a silent bug.
This change sets WithURL using a URL after for the repo is
available when a reference is used instead of a full url.
Signed-off-by: Matt Farina <matt.farina@suse.com>
managedFields were a changed that landed in 1.18. This is an array
under metadata with managedFields. The kubernetes client pkgs that
Helm uses automatically add them.
This change added a manager for the managedFields. The flow for
deciding on the name to use is:
1. An explicit name if one is chosen
2. The base name of the first os.Arg (the binary name) if no name
explicitly set.
3. unknown if no name set and name cannot be detected
The name is at the package level as there is no other place to easily
set it for Helm v3. Since the name is for the binary or app it should
be ok to set app wide.
Signed-off-by: Matt Farina <matt.farina@suse.com>
It just makes the code better, I suppose the following is rational:
- use standard libaray common constants instead of hardcode though it's
really common
- close the response body even if the http status code is not 200 OK.
The doc says *It is the caller's responsibility to close Body*.
- move the `bytes.Buffer` return value declaration where it gets used.
Signed-off-by: longkai <im.longkai@gmail.com>
For more information, please see the following URL:
https://github.com/helm/community/blob/main/hips/hip-0006.md
Note: OCI support remains experimental, and you are still
required to set HELM_EXPERIMENTAL_OCI=1 in your environment.
Signed-off-by: Josh Dolitsky <josh@dolit.ski>