You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
70 lines
2.5 KiB
70 lines
2.5 KiB
# Decode GPS data - Wio Terminal
|
|
|
|
In this part of the lesson, you will decode the NMEA messages read from the GPS sensor by the Wio Terminal, and extract the latitude and longitude.
|
|
|
|
## Decode GPS data
|
|
|
|
Once the raw NMEA data has been read from the serial port, it can be decoded using an open source NMEA library.
|
|
|
|
### Task - decode GPS data
|
|
|
|
Program the device to decode the GPS data.
|
|
|
|
1. Open the `gps-sensor` app project if it's not already open
|
|
|
|
1. Add a library dependency for the [TinyGPSPlus](https://github.com/mikalhart/TinyGPSPlus) library to the projects `platformio.ini` file. This library has code for decoding NMEA data.
|
|
|
|
```ini
|
|
lib_deps =
|
|
mikalhart/TinyGPSPlus @ 1.0.2
|
|
```
|
|
|
|
1. In `main.cpp`, add an include directive for the TinyGPSPlus library:
|
|
|
|
```cpp
|
|
#include <TinyGPS++.h>
|
|
```
|
|
|
|
1. Below the declaration of `Serial3`, declare a TinyGPSPlus object to process the NMEA sentences:
|
|
|
|
```cpp
|
|
TinyGPSPlus gps;
|
|
```
|
|
|
|
1. Change the contents of the `printGPSData` function to be the following:
|
|
|
|
```cpp
|
|
if (gps.encode(Serial3.read()))
|
|
{
|
|
if (gps.location.isValid())
|
|
{
|
|
Serial.print(gps.location.lat(), 6);
|
|
Serial.print(F(","));
|
|
Serial.print(gps.location.lng(), 6);
|
|
Serial.print(" - from ");
|
|
Serial.print(gps.satellites.value());
|
|
Serial.println(" satellites");
|
|
}
|
|
}
|
|
```
|
|
|
|
This code reads the next character from the UART serial port into the `gps` NMEA decoder. After each character, it will check to see if the decoder has read a valid sentence, then check to see if it has read a valid location. If the location is valid, it send it to the serial monitor, along with the number of satellites that contributed to this fix.
|
|
|
|
1. Build and upload the code to the Wio Terminal.
|
|
|
|
1. Once uploaded, you can monitor the GPS location data using the serial monitor.
|
|
|
|
```output
|
|
> Executing task: platformio device monitor <
|
|
|
|
--- Available filters and text transformations: colorize, debug, default, direct, hexlify, log2file, nocontrol, printable, send_on_enter, time
|
|
--- More details at http://bit.ly/pio-monitor-filters
|
|
--- Miniterm on /dev/cu.usbmodem1201 9600,8,N,1 ---
|
|
--- Quit: Ctrl+C | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
|
|
47.6423109,-122.1390293 - from 3 satellites
|
|
```
|
|
|
|
> 💁 You can find this code in the [code-gps-decode/wio-terminal](code-gps-decode/wio-terminal) folder.
|
|
|
|
😀 Your GPS sensor program with data decoding was a success!
|