|
|
|
|
name: CI
|
|
|
|
|
|
|
|
|
|
on:
|
|
|
|
|
push:
|
|
|
|
|
tags:
|
|
|
|
|
- 'wasi-sdk-*'
|
|
|
|
|
branches:
|
|
|
|
|
- main
|
|
|
|
|
|
|
|
|
|
pull_request:
|
|
|
|
|
workflow_dispatch:
|
|
|
|
|
|
|
|
|
|
jobs:
|
|
|
|
|
build:
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
name: Build ${{ matrix.artifact }}
|
|
|
|
|
runs-on: ${{ matrix.os }}
|
|
|
|
|
strategy:
|
|
|
|
|
fail-fast: false
|
|
|
|
|
matrix:
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
include:
|
|
|
|
|
- artifact: x86_64-linux
|
|
|
|
|
os: ubuntu-latest
|
|
|
|
|
|
|
|
|
|
- artifact: arm64-linux
|
|
|
|
|
os: ubuntu-latest
|
|
|
|
|
rust_target: aarch64-unknown-linux-gnu
|
|
|
|
|
env:
|
|
|
|
|
# Don't build a sysroot for this cross-compiled target since it
|
|
|
|
|
# would require a host compiler and the sysroot is otherwise
|
|
|
|
|
# already built on other CI builders.
|
|
|
|
|
WASI_SDK_CI_SKIP_SYSROOT: 1
|
|
|
|
|
|
|
|
|
|
WASI_SDK_CI_TOOLCHAIN_LLVM_CMAKE_ARGS: >-
|
|
|
|
|
-DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc
|
|
|
|
|
-DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g++
|
|
|
|
|
-DCMAKE_CROSSCOMPILING=True
|
|
|
|
|
-DCMAKE_CXX_FLAGS=-march=armv8-a
|
|
|
|
|
-DCMAKE_SYSTEM_PROCESSOR=arm64
|
|
|
|
|
-DCMAKE_SYSTEM_NAME=Linux
|
|
|
|
|
-DLLVM_HOST_TRIPLE=aarch64-linux-gnu
|
|
|
|
|
-DRUST_TARGET=aarch64-unknown-linux-gnu
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
|
|
|
|
|
- artifact: arm64-macos
|
|
|
|
|
os: macos-latest
|
|
|
|
|
rust_target: aarch64-apple-darwin
|
|
|
|
|
env:
|
|
|
|
|
WASI_SDK_CI_TOOLCHAIN_LLVM_CMAKE_ARGS: >-
|
|
|
|
|
-DCMAKE_OSX_DEPLOYMENT_TARGET=10.12
|
|
|
|
|
-DCMAKE_OSX_ARCHITECTURES=arm64
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
|
|
|
|
|
- artifact: x86_64-macos
|
|
|
|
|
os: macos-latest
|
|
|
|
|
rust_target: x86_64-apple-darwin
|
|
|
|
|
env:
|
|
|
|
|
WASI_SDK_CI_SKIP_SYSROOT: 1
|
|
|
|
|
WASI_SDK_CI_TOOLCHAIN_LLVM_CMAKE_ARGS: >-
|
|
|
|
|
-DCMAKE_OSX_DEPLOYMENT_TARGET=10.12
|
|
|
|
|
-DCMAKE_OSX_ARCHITECTURES=x86_64
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
|
|
|
|
|
- artifact: x86_64-windows
|
|
|
|
|
os: windows-latest
|
|
|
|
|
env:
|
|
|
|
|
# TODO: tests are pretty close to passing on Windows but need some
|
|
|
|
|
# final tweaks, namely testing the exit code doesn't work since
|
|
|
|
|
# exit codes are different on Windows and the `mmap.c` tests seems
|
|
|
|
|
# to have issues probably with line endings. Needs someone with a
|
|
|
|
|
# Windows checkout tot test further.
|
|
|
|
|
WASI_SDK_CI_SKIP_TESTS: 1
|
|
|
|
|
|
|
|
|
|
env: ${{ matrix.env || fromJSON('{}') }}
|
|
|
|
|
steps:
|
|
|
|
|
- uses: actions/checkout@v4
|
|
|
|
|
with:
|
|
|
|
|
fetch-depth: 0
|
|
|
|
|
- run: git fetch --tags --force
|
|
|
|
|
name: Force-fetch tags to work around actions/checkout#290
|
|
|
|
|
# We can't use `--depth 1` here sadly because the GNU config
|
|
|
|
|
# submodule is not pinned to a particular tag/branch. Please
|
|
|
|
|
# bump depth (or even better, the submodule), in case of "error:
|
|
|
|
|
# Server does not allow request for unadvertised object" in the
|
|
|
|
|
# future.
|
|
|
|
|
- run: git submodule update --init --depth 32 --jobs 3
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
|
|
|
|
|
# Persist ccache-based caches across builds. This directory is configured
|
|
|
|
|
# via the CCACHE_DIR env var below for ccache to use.
|
|
|
|
|
#
|
|
|
|
|
# Bump the prefix number to evict all previous caches and enforce a clean
|
|
|
|
|
# build, in the unlikely case that some weird build error occur and ccache
|
|
|
|
|
# becomes a potential suspect.
|
|
|
|
|
- uses: actions/cache@v4
|
|
|
|
|
id: cache-restore
|
|
|
|
|
with:
|
|
|
|
|
path: ${{ runner.tool_cache }}/ccache
|
|
|
|
|
key: 0-cache-${{ matrix.artifact }}-${{ github.run_id }}
|
|
|
|
|
restore-keys: |
|
|
|
|
|
0-cache-${{ matrix.artifact }}-
|
|
|
|
|
- run: |
|
|
|
|
|
mkdir -p '${{ runner.tool_cache }}/ccache'
|
|
|
|
|
echo 'CCACHE_DIR=${{ runner.tool_cache }}/ccache' >> $GITHUB_ENV
|
|
|
|
|
shell: bash
|
|
|
|
|
|
|
|
|
|
# Configure CMake flags for `ci/build.sh` as necessary for each
|
|
|
|
|
# matrix entry.
|
|
|
|
|
- run: |
|
|
|
|
|
cmake_args=-DWASI_SDK_ARTIFACT=${{ matrix.artifact }}
|
|
|
|
|
if [ "${{ matrix.rust_target }}" != "" ]; then
|
|
|
|
|
rustup target add ${{ matrix.rust_target }}
|
|
|
|
|
cmake_args="$cmake_args -DRUST_TARGET=${{ matrix.rust_target }}"
|
|
|
|
|
fi
|
|
|
|
|
echo WASI_SDK_CI_TOOLCHAIN_CMAKE_ARGS="$cmake_args" >> $GITHUB_ENV
|
|
|
|
|
shell: bash
|
|
|
|
|
|
|
|
|
|
# Add some extra installed software on each runner as necessary.
|
|
|
|
|
- name: Setup `wasmtime` for tests
|
|
|
|
|
uses: bytecodealliance/actions/wasmtime/setup@v1
|
|
|
|
|
with:
|
|
|
|
|
version: "18.0.2"
|
|
|
|
|
- name: Install ccache, ninja (macOS)
|
|
|
|
|
run: brew install ccache ninja
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
if: runner.os == 'macOS'
|
|
|
|
|
- name: Install ccache, ninja (Windows)
|
|
|
|
|
run: choco install ccache ninja
|
|
|
|
|
if: runner.os == 'Windows'
|
|
|
|
|
- name: Install ccache, ninja (Linux)
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
run: sudo apt install ccache
|
|
|
|
|
if: runner.os == 'Linux'
|
|
|
|
|
|
|
|
|
|
- name: Clear ccache statistics
|
|
|
|
|
run: ccache --zero-stats
|
|
|
|
|
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
- name: Build and test (macOS)
|
|
|
|
|
run: ./ci/build.sh
|
|
|
|
|
if: runner.os == 'macOS'
|
|
|
|
|
|
|
|
|
|
- name: Build and test (Linux)
|
|
|
|
|
run: ./ci/docker-build.sh ${{ matrix.artifact }}
|
|
|
|
|
if: runner.os == 'Linux'
|
|
|
|
|
|
|
|
|
|
# Setup the VS Developoer Prompt environment variables to explicitly use
|
|
|
|
|
# MSVC to compile LLVM as that avoids extra runtime dependencies
|
|
|
|
|
# msys/mingw might bring.
|
|
|
|
|
#
|
|
|
|
|
# As of 2024-07-22 this sha is the "v1.13.0" tag.
|
|
|
|
|
- uses: ilammy/msvc-dev-cmd@0b201ec74fa43914dc39ae48a89fd1d8cb592756
|
|
|
|
|
if: runner.os == 'Windows'
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
- name: Build and test (Windows)
|
|
|
|
|
run: |
|
|
|
|
|
# Delete a troublesome binary as recommended here
|
|
|
|
|
# https://github.com/ilammy/msvc-dev-cmd?tab=readme-ov-file#name-conflicts-with-shell-bash
|
|
|
|
|
rm /usr/bin/link
|
|
|
|
|
# Use a shorter build directory than the default on Windows to avoid
|
|
|
|
|
# hitting path length and command line length limits. See
|
|
|
|
|
# WebAssembly/wasi-libc#514. Despite using a different build directory
|
|
|
|
|
# though still move the `dist` folder to `build/dist` so the upload
|
|
|
|
|
# step below doesn't need a windows-specific hook.
|
|
|
|
|
./ci/build.sh C:/wasi-sdk
|
|
|
|
|
mkdir build
|
|
|
|
|
cp -r C:/wasi-sdk/dist build
|
|
|
|
|
shell: bash
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
if: runner.os == 'Windows'
|
|
|
|
|
|
|
|
|
|
# Upload the `dist` folder from the build as the artifacts for this
|
|
|
|
|
# runner.
|
|
|
|
|
- name: Upload artifacts
|
|
|
|
|
uses: actions/upload-artifact@v4
|
|
|
|
|
with:
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
name: ${{ format( 'dist-{0}', matrix.artifact) }}
|
|
|
|
|
path: build/dist
|
|
|
|
|
|
|
|
|
|
# Caches are persisted across runs by restoring the latest cache which
|
|
|
|
|
# means that quite a lot of cruft can accumulate. Prune older entries that
|
|
|
|
|
# haven't been used by this run to avoid the cache continuously getting
|
|
|
|
|
# larger. In theory this should use `--evict-older-than $dur` where `$dur`
|
|
|
|
|
# is the time since the start of the run, but I'm not sure how to easily
|
|
|
|
|
# calculate that so pick something loose like one day instead.
|
|
|
|
|
- name: Prune ccache objects
|
|
|
|
|
run: ccache --evict-older-than 1d
|
|
|
|
|
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
# Help debug ccache issues by showing what happened.
|
|
|
|
|
- if: always()
|
|
|
|
|
name: Show ccache statistics
|
|
|
|
|
run: ccache --show-stats
|
|
|
|
|
|
|
|
|
|
# Always save a cache, even if the build failed. This ensures that if
|
|
|
|
|
# live-debugging via CI the build gets to pick up where it left off last
|
|
|
|
|
# time instead of having to recreate everything each time a failure
|
|
|
|
|
# happens.
|
|
|
|
|
- if: always() && steps.cache-restore.outputs.cache-hit != 'true'
|
|
|
|
|
uses: actions/cache/save@v4
|
|
|
|
|
with:
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
path: ${{ runner.tool_cache }}/ccache
|
|
|
|
|
key: 0-cache-${{ matrix.artifact }}-${{ github.run_id }}
|
|
|
|
|
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
# Once all of the above matrix entries have completed this job will run and
|
|
|
|
|
# assemble the final `wasi-sdk-*` artifacts by fusing the toolchain/sysroot
|
|
|
|
|
# artifacts.
|
|
|
|
|
finalize:
|
|
|
|
|
name: Finalize wasi-sdk artifacts
|
|
|
|
|
needs: build
|
|
|
|
|
runs-on: ubuntu-latest
|
|
|
|
|
steps:
|
|
|
|
|
- uses: actions/checkout@v4
|
|
|
|
|
with:
|
|
|
|
|
fetch-depth: 0
|
|
|
|
|
- run: git fetch --tags --force
|
|
|
|
|
name: Force-fetch tags to work around actions/checkout#290
|
|
|
|
|
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
# Download all artifacts from all platforms in `build`, merge them into
|
|
|
|
|
# final wasi-sdk-* artifacts, and then upload them.
|
|
|
|
|
- uses: actions/download-artifact@v4
|
|
|
|
|
- run: ./ci/merge-artifacts.sh
|
|
|
|
|
- uses: actions/upload-artifact@v4
|
|
|
|
|
with:
|
|
|
|
|
name: release-artifacts
|
|
|
|
|
path: dist
|
|
|
|
|
|
Rewrite the build system with CMake (#429)
* Rewrite the build system with CMake
This commit is an attempt to provide a concrete path forward on
WebAssembly/wasi-sdk#425. I personally think it's pretty important to
get the ability to have more architectures here but at the same time I
also think it's important to to take this as an opportunity to refactor
and improve the build system of this repository. To that end this
represents my attempt to improve the status quo.
This removes the old `Makefile` and replaces it with a CMake-based
system to build all these projects. Overall this is intended to be a "no
functional change" intended sort of refactoring. Changing build systems
inevitably causes issues, however, so this change additionally has a
very high likelihood of needing follow-up fixes. At a high enough level
this commit introduces two major changes to how this repository is
built:
1. The `make`-based system (the root `Makefile`) is replaced with CMake.
This additionally updates tests to use CMake.
2. A single "build" is split into either building a toolchain or
building a sysroot. This enables builds to only build one or the
other as necessary.
The first change, using CMake, is due to the fact that using `make` on
Windows basically is not pleasant coupled with the fact that more
advanced logic, such as changing flags, compilers, etc, is much easier
with a CMake-based system. The second change is intended to cover the
use case of #425 in addition to refactoring the current build.
Throughout this change I have intentionally not tried to keep a 1:1
correspondance with behaviors in the old `Makefile` because much of this
PR is intended to address shortcomings in the old build system. A list
of changes, improvements, etc, made here are:
* CMake provides a much nicer portability story to Windows than `make`.
This is moving towards the direction of not needing `bash`, for
example, to build an SDK. Currently `wasi-libc` still requires this,
but that's now the only "hard" dependency.
* The set of targets built can now be configured for smaller builds
and/or debugging just a single target. All WASI targets are still
built by default but it's much easier to add/remove them.
* Different targets are now able to be built in parallel as opposed to
the unconditional serial-nature of the `Makefile`.
* Use of `ninja` is no longer required and separate build systems can be
used if desired.
* The sysroot and the toolchain can now be built with different CMake
build profiles. For example the `Makefile` hardcoded `MinSizeRel` and
`RelWithDebInfo` and this can now be much more easily customized by
the SDK builder.
* Tarballs are now more consistently produced and named. For a tarball
of the name `foo.tar.gz` it's guaranteed that there's a single folder
`foo` created when unpacking the tarball.
* The macOS binaries are no longer hybrid x64/arm64 binaries which
greatly inflates the size of the SDK. There's now a separate build for
each architecture.
* CI now produces arm64-linux binaries. The sysroot is not built on the
arm64-linux builder and the sysroot from the x86_64-linux builder is
used instead.
* Tests are almost ready to execute on Windows, there's just a few minor
issues related to exit statuses and probably line endings which need
to be worked out. Will require someone with a Windows checkout, however.
* Tests are now integrated into CMake. This means that the wasm binaries
are able to be built in parallel and the tests are additionally
executed in parallel with `ctest`. It is possible to build/run a
single test. Tests no longer place all of their output in the source
tree.
* Out-of-tree builds are now possible and the build/installation
directories can both be customized.
* CI configuration of Windows/macOS/Linux is much more uniform by having
everything in one build matrix instead of separate matrices.
* Linux builds are exclusively done in docker containers in CI now. CI
no longer produces two Linux builds only for one to be discarded when
artifacts are published.
* Windows 32-bit builds are no longer produced in CI since it's expected
that everyone actually wants the 64-bit ones instead.
* Use of `ccache` is now automatically enabled if it's detected on the
system.
* Many preexisting shell scripts are now translated to CMake one way or
another.
* There's no longer a separate build script for how to build wasi-sdk in
docker and outside of docker which needs to be kept in sync,
everything funnels through the same script.
* The `docker/Dockerfile` build of wasi-sdk now uses the actual
toolchain built from CI and additionally doesn't duplicate various
CMake-based configuration files.
Overall one thing I want to additionally point out is that I'm not CMake
expert. I suspect there's lots of little stylistic and such improvements
that can be made.
* Fix skipping tests on windows
* Fetch a full depth in the finalize workflow too
* Fix multi-arch docker build
* Fix assembling of sysroot
* Fix script syntax
* Clean up the merge script slightly
* Remove Pat's email
* Move configuration of CMAKE_EXECUTABLE_SUFFIX
* Remove redundant sysroot option
* Fix comment in testcase.sh
* Update new p2 cmake files
* Remove now-duplicate wasi-sdk-p2.cmake
6 months ago
|
|
|
# Use the `wasi-sdk-*` artifacts just created to create a docker image
|
|
|
|
|
# with a toolchain pre-installed.
|
|
|
|
|
- uses: docker/login-action@v2
|
|
|
|
|
with:
|
|
|
|
|
registry: ghcr.io
|
|
|
|
|
username: ${{ github.actor }}
|
|
|
|
|
password: ${{ secrets.GITHUB_TOKEN }}
|
|
|
|
|
- uses: docker/setup-qemu-action@v2
|
|
|
|
|
- uses: docker/setup-buildx-action@v2
|
|
|
|
|
- uses: docker/metadata-action@v4
|
|
|
|
|
id: meta
|
|
|
|
|
with:
|
|
|
|
|
images: ghcr.io/${{ github.repository }}
|
|
|
|
|
tags: |
|
|
|
|
|
type=schedule
|
|
|
|
|
type=ref,event=branch
|
|
|
|
|
type=ref,event=tag
|
|
|
|
|
type=ref,event=pr
|
|
|
|
|
type=sha
|
|
|
|
|
- name: Build and push wasi-sdk docker image
|
|
|
|
|
uses: docker/build-push-action@v3
|
|
|
|
|
with:
|
|
|
|
|
context: .
|
|
|
|
|
file: docker/Dockerfile
|
|
|
|
|
push: ${{ github.event_name != 'pull_request' && github.event_name != 'workflow_dispatch' }}
|
|
|
|
|
platforms: linux/amd64,linux/arm64
|
|
|
|
|
tags: ${{ steps.meta.outputs.tags }}
|
|
|
|
|
labels: ${{ steps.meta.outputs.labels }}
|
|
|
|
|
cache-from: type=gha
|
|
|
|
|
cache-to: type=gha,mode=max
|
|
|
|
|
|
|
|
|
|
- name: Publish a draft release
|
|
|
|
|
if: startsWith(github.ref, 'refs/tags')
|
|
|
|
|
run: gh release create --draft --prerelease --generate-notes ${{ github.ref_name }} ./dist/*
|
|
|
|
|
env:
|
|
|
|
|
GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
|
|
|
|
|
|
|
|
|
|
# Test the final artifacts as-is without passing `--sysroot` or
|
|
|
|
|
# `-resource-dir` or any extra flags. This exercises running the compiler
|
|
|
|
|
# as-is from the distribution tarballs and ensuring that it can build and pass
|
|
|
|
|
# all tests.
|
|
|
|
|
test-standalone:
|
|
|
|
|
name: Test standalone toolchain
|
|
|
|
|
needs: build
|
|
|
|
|
runs-on: ubuntu-latest
|
|
|
|
|
steps:
|
|
|
|
|
- uses: actions/checkout@v4
|
|
|
|
|
with:
|
|
|
|
|
fetch-depth: 0
|
|
|
|
|
- run: git fetch --tags --force
|
|
|
|
|
name: Force-fetch tags to work around actions/checkout#290
|
|
|
|
|
- run: git submodule update --init --depth 32 --jobs 3
|
|
|
|
|
- name: Setup `wasmtime` for tests
|
|
|
|
|
uses: bytecodealliance/actions/wasmtime/setup@v1
|
|
|
|
|
with:
|
|
|
|
|
version: "18.0.2"
|
|
|
|
|
- name: Install ninja
|
|
|
|
|
run: sudo apt-get install -y ninja-build
|
|
|
|
|
if: runner.os == 'Linux'
|
|
|
|
|
- uses: actions/download-artifact@v4
|
|
|
|
|
with:
|
|
|
|
|
name: dist-x86_64-linux
|
|
|
|
|
path: dist-x86_64-linux
|
|
|
|
|
- run: ./ci/merge-artifacts.sh
|
|
|
|
|
- run: tar xf dist/wasi-sdk-*.tar.gz
|
|
|
|
|
- run: |
|
|
|
|
|
cmake -G Ninja -B build -S . \
|
|
|
|
|
-DWASI_SDK_INCLUDE_TESTS=ON \
|
|
|
|
|
-DWASI_SDK_TEST_HOST_TOOLCHAIN=ON \
|
|
|
|
|
-DCMAKE_TOOLCHAIN_FILE=$(ls ./wasi-sdk-*/share/cmake/wasi-sdk.cmake)
|
|
|
|
|
- run: ninja -C build build-tests
|
|
|
|
|
- run: ctest --output-on-failure --parallel 10 --test-dir build/tests
|
