mirror of https://github.com/Black-Gold/Learn
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
314 lines
8.9 KiB
314 lines
8.9 KiB
#!/bin/bash
|
|
|
|
# CREDIT TO THESE TUTORIALS:
|
|
# petr.io/en/blog/2015/11/09/read-only-raspberry-pi-with-jessie
|
|
# hallard.me/raspberry-pi-read-only
|
|
# k3a.me/how-to-make-raspberrypi-truly-read-only-reliable-and-trouble-free
|
|
|
|
if [ $(id -u) -ne 0 ]; then
|
|
echo "Installer must be run as root."
|
|
echo "Try 'sudo bash $0'"
|
|
exit 1
|
|
fi
|
|
|
|
clear
|
|
|
|
echo "This script configures a Raspberry Pi"
|
|
echo "SD card to boot into read-only mode,"
|
|
echo "obviating need for clean shutdown."
|
|
echo "NO FILES ON THE CARD CAN BE CHANGED"
|
|
echo "WHEN PI IS BOOTED IN THIS STATE. Either"
|
|
echo "the filesystems must be remounted in"
|
|
echo "read/write mode, card must be mounted"
|
|
echo "R/W on another system, or an optional"
|
|
echo "jumper can be used to enable read/write"
|
|
echo "on boot."
|
|
echo
|
|
echo "Links to original tutorials are in"
|
|
echo "script source. THIS IS A ONE-WAY"
|
|
echo "OPERATION. THERE IS NO SCRIPT TO"
|
|
echo "REVERSE THIS SETUP! ALL other system"
|
|
echo "config should be complete before using"
|
|
echo "this script. MAKE A BACKUP FIRST."
|
|
echo
|
|
echo "Run time ~5 minutes. Reboot required."
|
|
echo
|
|
echo -n "CONTINUE? [y/N] "
|
|
read
|
|
if [[ ! "$REPLY" =~ ^(yes|y|Y)$ ]]; then
|
|
echo "Canceled."
|
|
exit 0
|
|
fi
|
|
|
|
# FEATURE PROMPTS ----------------------------------------------------------
|
|
# Installation doesn't begin until after all user input is taken.
|
|
|
|
INSTALL_RW_JUMPER=0
|
|
INSTALL_HALT=0
|
|
INSTALL_WATCHDOG=0
|
|
|
|
# Given a list of strings representing options, display each option
|
|
# preceded by a number (1 to N), display a prompt, check input until
|
|
# a valid number within the selection range is entered.
|
|
selectN() {
|
|
for ((i=1; i<=$#; i++)); do
|
|
echo $i. ${!i}
|
|
done
|
|
echo
|
|
REPLY=""
|
|
while :
|
|
do
|
|
echo -n "SELECT 1-$#: "
|
|
read
|
|
if [[ $REPLY -ge 1 ]] && [[ $REPLY -le $# ]]; then
|
|
return $REPLY
|
|
fi
|
|
done
|
|
}
|
|
|
|
SYS_TYPES=(Pi\ 3\ /\ Pi\ Zero\ W All\ other\ models)
|
|
WATCHDOG_MODULES=(bcm2835_wdog bcm2708_wdog)
|
|
OPTION_NAMES=(NO YES)
|
|
|
|
echo -n "Enable boot-time read/write jumper? [y/N] "
|
|
read
|
|
if [[ "$REPLY" =~ (yes|y|Y)$ ]]; then
|
|
INSTALL_RW_JUMPER=1
|
|
echo -n "GPIO pin for R/W jumper: "
|
|
read
|
|
RW_PIN=$REPLY
|
|
fi
|
|
|
|
echo -n "Install GPIO-halt utility? [y/N] "
|
|
read
|
|
if [[ "$REPLY" =~ (yes|y|Y)$ ]]; then
|
|
INSTALL_HALT=1
|
|
echo -n "GPIO pin for halt button: "
|
|
read
|
|
HALT_PIN=$REPLY
|
|
fi
|
|
|
|
echo -n "Enable kernel panic watchdog? [y/N] "
|
|
read
|
|
if [[ "$REPLY" =~ (yes|y|Y)$ ]]; then
|
|
INSTALL_WATCHDOG=1
|
|
echo "Target system type:"
|
|
selectN "${SYS_TYPES[0]}" \
|
|
"${SYS_TYPES[1]}"
|
|
WD_TARGET=$?
|
|
fi
|
|
|
|
# VERIFY SELECTIONS BEFORE CONTINUING --------------------------------------
|
|
|
|
echo
|
|
if [ $INSTALL_RW_JUMPER -eq 1 ]; then
|
|
echo "Boot-time R/W jumper: YES (GPIO$RW_PIN)"
|
|
else
|
|
echo "Boot-time R/W jumper: NO"
|
|
fi
|
|
if [ $INSTALL_HALT -eq 1 ]; then
|
|
echo "Install GPIO-halt: YES (GPIO$HALT_PIN)"
|
|
else
|
|
echo "Install GPIO-halt: NO"
|
|
fi
|
|
if [ $INSTALL_WATCHDOG -eq 1 ]; then
|
|
echo "Enable watchdog: YES (${SYS_TYPES[WD_TARGET-1]})"
|
|
else
|
|
echo "Enable watchdog: NO"
|
|
fi
|
|
echo
|
|
echo -n "CONTINUE? [y/N] "
|
|
read
|
|
if [[ ! "$REPLY" =~ ^(yes|y|Y)$ ]]; then
|
|
echo "Canceled."
|
|
exit 0
|
|
fi
|
|
|
|
# START INSTALL ------------------------------------------------------------
|
|
# All selections have been validated at this point...
|
|
|
|
# Given a filename, a regex pattern to match and a replacement string:
|
|
# Replace string if found, else no change.
|
|
# (# $1 = filename, $2 = pattern to match, $3 = replacement)
|
|
replace() {
|
|
grep $2 $1 >/dev/null
|
|
if [ $? -eq 0 ]; then
|
|
# Pattern found; replace in file
|
|
sed -i "s/$2/$3/g" $1 >/dev/null
|
|
fi
|
|
}
|
|
|
|
# Given a filename, a regex pattern to match and a replacement string:
|
|
# If found, perform replacement, else append file w/replacement on new line.
|
|
replaceAppend() {
|
|
grep $2 $1 >/dev/null
|
|
if [ $? -eq 0 ]; then
|
|
# Pattern found; replace in file
|
|
sed -i "s/$2/$3/g" $1 >/dev/null
|
|
else
|
|
# Not found; append on new line (silently)
|
|
echo $3 | sudo tee -a $1 >/dev/null
|
|
fi
|
|
}
|
|
|
|
# Given a filename, a regex pattern to match and a string:
|
|
# If found, no change, else append file with string on new line.
|
|
append1() {
|
|
grep $2 $1 >/dev/null
|
|
if [ $? -ne 0 ]; then
|
|
# Not found; append on new line (silently)
|
|
echo $3 | sudo tee -a $1 >/dev/null
|
|
fi
|
|
}
|
|
|
|
# Given a filename, a regex pattern to match and a string:
|
|
# If found, no change, else append space + string to last line --
|
|
# this is used for the single-line /boot/cmdline.txt file.
|
|
append2() {
|
|
grep $2 $1 >/dev/null
|
|
if [ $? -ne 0 ]; then
|
|
# Not found; insert in file before EOF
|
|
sed -i "s/\'/ $3/g" $1 >/dev/null
|
|
fi
|
|
}
|
|
|
|
echo
|
|
echo "Starting installation..."
|
|
echo "Updating package index files..."
|
|
apt-get update
|
|
|
|
echo "Removing unwanted packages..."
|
|
#apt-get remove -y --force-yes --purge triggerhappy logrotate dbus \
|
|
# dphys-swapfile xserver-common lightdm fake-hwclock
|
|
# Let's keep dbus...that includes avahi-daemon, a la 'raspberrypi.local',
|
|
# also keeping xserver & lightdm for GUI login (WIP, not working yet)
|
|
apt-get remove -y --force-yes --purge triggerhappy logrotate \
|
|
dphys-swapfile fake-hwclock
|
|
apt-get -y --force-yes autoremove --purge
|
|
|
|
# Replace log management with busybox (use logread if needed)
|
|
echo "Installing ntp and busybox-syslogd..."
|
|
apt-get -y --force-yes install ntp busybox-syslogd; dpkg --purge rsyslog
|
|
|
|
echo "Configuring system..."
|
|
|
|
# Install boot-time R/W jumper test if requested
|
|
GPIOTEST="gpio -g mode $RW_PIN up\n\
|
|
if [ \`gpio -g read $RW_PIN\` -eq 0 ] ; then\n\
|
|
\tmount -o remount,rw \/\n\
|
|
\tmount -o remount,rw \/boot\n\
|
|
fi\n"
|
|
if [ $INSTALL_RW_JUMPER -ne 0 ]; then
|
|
apt-get install -y --force-yes wiringpi
|
|
# Check if already present in rc.local:
|
|
grep "gpio -g read" /etc/rc.local >/dev/null
|
|
if [ $? -eq 0 ]; then
|
|
# Already there, but make sure pin is correct:
|
|
sed -i "s/^.*gpio\ -g\ read.*$/$GPIOTEST/g" /etc/rc.local >/dev/null
|
|
|
|
else
|
|
# Not there, insert before final 'exit 0'
|
|
sed -i "s/^exit 0/$GPIOTEST\\nexit 0/g" /etc/rc.local >/dev/null
|
|
fi
|
|
fi
|
|
|
|
# Install watchdog if requested
|
|
if [ $INSTALL_WATCHDOG -ne 0 ]; then
|
|
apt-get install -y --force-yes watchdog
|
|
# $MODULE is specific watchdog module name
|
|
MODULE=${WATCHDOG_MODULES[($WD_TARGET-1)]}
|
|
# Add to /etc/modules, update watchdog config file
|
|
append1 /etc/modules $MODULE $MODULE
|
|
replace /etc/watchdog.conf "#watchdog-device" "watchdog-device"
|
|
replace /etc/watchdog.conf "#max-load-1" "max-load-1"
|
|
# Start watchdog at system start and start right away
|
|
# Raspbian Stretch needs this package installed first
|
|
apt-get install -y --force-yes insserv
|
|
insserv watchdog; /etc/init.d/watchdog start
|
|
# Additional settings needed on Jessie
|
|
append1 /lib/systemd/system/watchdog.service "WantedBy" "WantedBy=multi-user.target"
|
|
systemctl enable watchdog
|
|
# Set up automatic reboot in sysctl.conf
|
|
replaceAppend /etc/sysctl.conf "^.*kernel.panic.*$" "kernel.panic = 10"
|
|
fi
|
|
|
|
# Install gpio-halt if requested
|
|
if [ $INSTALL_HALT -ne 0 ]; then
|
|
apt-get install -y --force-yes wiringpi
|
|
echo "Installing gpio-halt in /usr/local/bin..."
|
|
cd /tmp
|
|
curl -LO https://github.com/adafruit/Adafruit-GPIO-Halt/archive/master.zip
|
|
unzip master.zip
|
|
cd Adafruit-GPIO-Halt-master
|
|
make
|
|
mv gpio-halt /usr/local/bin
|
|
cd ..
|
|
rm -rf Adafruit-GPIO-Halt-master
|
|
|
|
# Add gpio-halt to /rc.local:
|
|
grep gpio-halt /etc/rc.local >/dev/null
|
|
if [ $? -eq 0 ]; then
|
|
# gpio-halt already in rc.local, but make sure correct:
|
|
sed -i "s/^.*gpio-halt.*$/\/usr\/local\/bin\/gpio-halt $HALT_PIN \&/g" /etc/rc.local >/dev/null
|
|
else
|
|
# Insert gpio-halt into rc.local before final 'exit 0'
|
|
sed -i "s/^exit 0/\/usr\/local\/bin\/gpio-halt $HALT_PIN \&\\nexit 0/g" /etc/rc.local >/dev/null
|
|
fi
|
|
fi
|
|
|
|
# Add fastboot, noswap and/or ro to end of /boot/cmdline.txt
|
|
append2 /boot/cmdline.txt fastboot fastboot
|
|
append2 /boot/cmdline.txt noswap noswap
|
|
append2 /boot/cmdline.txt ro^o^t ro
|
|
|
|
# Move /var/spool to /tmp
|
|
rm -rf /var/spool
|
|
ln -s /tmp /var/spool
|
|
|
|
# Move /var/lib/lightdm and /var/cache/lightdm to /tmp
|
|
rm -rf /var/lib/lightdm
|
|
rm -rf /var/cache/lightdm
|
|
ln -s /tmp /var/lib/lightdm
|
|
ln -s /tmp /var/cache/lightdm
|
|
|
|
# Make SSH work
|
|
replaceAppend /etc/ssh/sshd_config "^.*UsePrivilegeSeparation.*$" "UsePrivilegeSeparation no"
|
|
# bbro method (not working in Jessie?):
|
|
#rmdir /var/run/sshd
|
|
#ln -s /tmp /var/run/sshd
|
|
|
|
# Change spool permissions in var.conf (rondie/Margaret fix)
|
|
replace /usr/lib/tmpfiles.d/var.conf "spool\s*0755" "spool 1777"
|
|
|
|
# Move dhcpd.resolv.conf to tmpfs
|
|
touch /tmp/dhcpcd.resolv.conf
|
|
rm /etc/resolv.conf
|
|
ln -s /tmp/dhcpcd.resolv.conf /etc/resolv.conf
|
|
|
|
# Make edits to fstab
|
|
# make / ro
|
|
# tmpfs /var/log tmpfs nodev,nosuid 0 0
|
|
# tmpfs /var/tmp tmpfs nodev,nosuid 0 0
|
|
# tmpfs /tmp tmpfs nodev,nosuid 0 0
|
|
replace /etc/fstab "vfat\s*defaults\s" "vfat defaults,ro "
|
|
replace /etc/fstab "ext4\s*defaults,noatime\s" "ext4 defaults,noatime,ro "
|
|
append1 /etc/fstab "/var/log" "tmpfs /var/log tmpfs nodev,nosuid 0 0"
|
|
append1 /etc/fstab "/var/tmp" "tmpfs /var/tmp tmpfs nodev,nosuid 0 0"
|
|
append1 /etc/fstab "\s/tmp" "tmpfs /tmp tmpfs nodev,nosuid 0 0"
|
|
|
|
# PROMPT FOR REBOOT --------------------------------------------------------
|
|
|
|
echo "Done."
|
|
echo
|
|
echo "Settings take effect on next boot."
|
|
echo
|
|
echo -n "REBOOT NOW? [y/N] "
|
|
read
|
|
if [[ ! "$REPLY" =~ ^(yes|y|Y)$ ]]; then
|
|
echo "Exiting without reboot."
|
|
exit 0
|
|
fi
|
|
echo "Reboot started..."
|
|
reboot
|
|
exit 0
|