|
|
|
|
|
# **iftop**
|
|
|
|
|
|
|
|
|
|
|
|
## 说明
|
|
|
|
|
|
|
|
|
|
|
|
**iftop命令** 是一款实时流量监控工具，监控TCP/IP连接等，缺点就是无报表功能。必须以root身份才能运行。
|
|
|
|
|
|
|
|
|
|
|
|
## 选项
|
|
|
|
|
|
|
|
|
|
|
|
```markdown
|
|
|
|
|
|
iftop: display bandwidth usage on an interface by host
|
|
|
|
|
|
|
|
|
|
|
|
Synopsis: iftop -h | [-npblNBP] [-i interface] [-f filter code]
|
|
|
|
|
|
[-F net/mask] [-G net6/mask6]
|
|
|
|
|
|
|
|
|
|
|
|
-h display this message
|
|
|
|
|
|
-n don't do hostname lookups
|
|
|
|
|
|
-N don't convert port numbers to services
|
|
|
|
|
|
-p run in promiscuous mode (show traffic between other
|
|
|
|
|
|
hosts on the same network segment)
|
|
|
|
|
|
-b don't display a bar graph of traffic
|
|
|
|
|
|
-B Display bandwidth in bytes
|
|
|
|
|
|
-i interface listen on named interface
|
|
|
|
|
|
-f filter code use filter code to select packets to count
|
|
|
|
|
|
(default: none, but only IP packets are counted)
|
|
|
|
|
|
-F net/mask show traffic flows in/out of IPv4 network
|
|
|
|
|
|
-G net6/mask6 show traffic flows in/out of IPv6 network
|
|
|
|
|
|
-l display and count link-local IPv6 traffic (default: off)
|
|
|
|
|
|
-P show ports as well as hosts
|
|
|
|
|
|
-m limit sets the upper limit for the bandwidth scale
|
|
|
|
|
|
-c config file specifies an alternative configuration file
|
|
|
|
|
|
-t use text interface without ncurses
|
|
|
|
|
|
|
|
|
|
|
|
Sorting orders:
|
|
|
|
|
|
-o 2s Sort by first column (2s traffic average)
|
|
|
|
|
|
-o 10s Sort by second column (10s traffic average) [default]
|
|
|
|
|
|
-o 40s Sort by third column (40s traffic average)
|
|
|
|
|
|
-o source Sort by source address
|
|
|
|
|
|
-o destination Sort by destination address
|
|
|
|
|
|
|
|
|
|
|
|
The following options are only available in combination with -t
|
|
|
|
|
|
-s num print one single text output afer num seconds, then quit
|
|
|
|
|
|
-L num number of lines to print
|
|
|
|
|
|
|
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
|
|
## 界面说明
|
|
|
|
|
|
|
|
|
|
|
|
* 第一行为带宽，这里为1Mbit,不是字节哦.
|
|
|
|
|
|
* 连接列表，最后三列分别是2秒，10秒和40秒的平均流量
|
|
|
|
|
|
* `=>` 代表发送
|
|
|
|
|
|
* `<=` 代表接收
|
|
|
|
|
|
* 最后三行表示发送，接收和全部的流量，
|
|
|
|
|
|
* 第二列为你运行iftop到目前流量，第三列为高峰值，第四列为平均值。
|
|
|
|
|
|
|
|
|
|
|
|
## 实例
|
|
|
|
|
|
|
|
|
|
|
|
```bash
|
|
|
|
|
|
iftop # 默认是监控第一块网卡的流量
|
|
|
|
|
|
iftop -i eth1 # 监控eth1
|
|
|
|
|
|
iftop -n # 直接显示IP, 不进行DNS反解析
|
|
|
|
|
|
iftop -N # 直接显示连接埠编号, 不显示服务名称
|
|
|
|
|
|
iftop -F 192.168.1.0/24 or 192.168.1.0/255.255.255.0 # 显示某个网段进出封包流量
|
|
|
|
|
|
```
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
