* fix: update unit test for go 1.14 error string change
Signed-off-by: Matt Butcher <matt.butcher@microsoft.com>
* changed strategy based on conversation with Adam
Signed-off-by: Matt Butcher <matt.butcher@microsoft.com>
- Removed most right whitespace chomps except those directly following a
template definition where it make sense to not lead with a blank line.
The system applied is now to almost always left whitespace chomp but
also whitespace chomp right if its the first thing in a file or
template definition.
- Updated indentation to be systematic throughout all the boilerplace
files.
Signed-off-by: Erik Sundell <erik.i.sundell@gmail.com>
The 'helm upgrade' command was not checking if the cluster was reachable.
Also, 'helm upgrade --install' first checks if the release exists
already. If that check fails there is no point in continuing the
upgrade. This optimization avoids a second timeout of 30 seconds when
trying to do the upgrade.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
When archives are created on windows the path spearator in the
archive file is \\. This causes issues when the file is unpacked.
For example, on Linux the files are unpacked in a flat structure
and \ is part of the file name. This causes comp issues. In Helm
v2 the path was set as / when the archive was written. This works
on both Windows and POSIX systems.
The fix being implemented is to use the ToSlash function to ensure
/ is used as the separator.
Fixes#7748
Signed-off-by: Matt Farina <matt@mattfarina.com>
If several instances of Helm are run at the same moment and try to download the
same chart, some of them might see an empty or incomplete file in cache. Prevent
that by saving the dowloaded file atomically.
Closes#7600
Signed-off-by: Mikhail Gusarov <misha@ridge.co>
* fix: add new static linter and fix issues it found
Signed-off-by: Matt Butcher <matt.butcher@microsoft.com>
* fixed two additional linter errors.
Signed-off-by: Matt Butcher <matt.butcher@microsoft.com>
It is more idiomatic to compare the string against the empty string than to check the string's length.
Signed-off-by: Matthew Fisher <matt.fisher@microsoft.com>
Don't delete a resource on upgrade if it is annotated with
helm.io/resource-policy=keep. This can cause data loss for users
if the annotation is ignored(e.g. for a PVC)
Close#7677
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
This complements the verification output fixed in #7706. On verify
there should be some detail about the verification rather than
no information.
Signed-off-by: Matt Farina <matt@mattfarina.com>
When using the --verify flag on the pull command the output was
an internal Go object rather than useful detail. This is a bug.
The output new displays who signed the chart along with the
hash.
Fixes#7624
Signed-off-by: Matt Farina <matt@mattfarina.com>
The memory driver is used for go tests. It can also be used from the
command-line by setting the environment variable HELM_DRIVER=memory.
In the latter case however, there was no way to pre-provision some
releases.
This commit introduces the HELM_MEMORY_DRIVER_DATA variable which
can be used to provide a colon-separated list of yaml files specifying
releases to provision automatically.
For example:
HELM_DRIVER=memory \
HELM_MEMORY_DRIVER_DATA=./testdata/releases.yaml \
helm list --all-namespaces
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
This is a copy of the --disable-openapi-validation flag from the install command as introduced by Matthew Fisher.
See commit 67e57a5fbb
It allows upgrading releases without the need to validate the Kubernetes OpenAPI Schema.
Signed-off-by: Sebastian Voinea <sebastian.voinea@gmx.de>
But instead use a newly initialized Scheme with only Kubernetes native
resources added. This ensures the 3-way-merge patch strategy is not
accidentally chosen for custom resources due to them being added
to the global Scheme by e.g. versioned clients while using Helm as a
package, and not a self-contained binary.
Signed-off-by: Hidde Beydals <hello@hidde.co>
The template command uses the memory driver. This driver now supports
namespaces, so the template code-path now specifies the namespace as
required by the memory driver.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
* Fix issue with apiVersion v1 lock digest
When apiVersion v1 chart dependencies are built with Helm 2
and then built with Helm 3, the lock digests differ. To avoid
this issue, a depdendency update is forced.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Check against Helm v2 hash
Handle scenario where dependency hash was generated by Helm v2
but need to do a dependency build with Helm v3.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Add unit test
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Refactor unit test
Refactor unit test to use an existing chart as dependency
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Update after review
Comments:
- https://github.com/helm/helm/pull/7261#discussion_r373827088
- https://github.com/helm/helm/pull/7261#discussion_r373827250
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Allow template output to use release name
helm template output command uses the chart name only when writing
templates to disk. This changes will also use the release name
to avoid colloiding the path when output nore than one release
of smae chart.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Update after review
Comment:
- https://github.com/helm/helm/pull/7503/files#r374130090
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
These flags snuck in through a feature that was reverted and removed in Helm 2, but snuck into Helm 3.
They were never hooked up or used, so they were a no-op. This shouldn't affect anyone.
Signed-off-by: Matthew Fisher <matt.fisher@microsoft.com>
Use the same install order for hooks as for normal resources (non-hooks) for hooks with equal weight.
This makes resource handling more consistent and helps, when there are hook consisting of several resources like e.g. a service account and a job using this service account.
The sort functions are changed from an in place search to an out of place sort to avoid inout parameters.
Closes#7416.
Signed-off-by: Daniel Strobusch <1847260+dastrobu@users.noreply.github.com>
Remove references to protobuf and update description of release
object stored representation to Helm v3.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
Helm does not yet properly handle concurrent executions (see #7322),
and invoking Helm concurrently on the same release lead to corrupted storage.
Specifically, several Releases may be marked as DEPLOYED. This patch improved handling of such situations, by taking the latest
DEPLOYED Release. Eventually, the storage will clean itself out, after
the corrupted Releases are deleted due to --history-max.
This is a port to Helm v3 of #7319.
Signed-off-by: Cristian Klein <cristian.klein@elastisys.com>
The error returned from DeployedAll will never contain "not found".
The error returned at the end of Deployed is already known to be nil,
and we never want to return ls[0] together with a non-nil error anyway.
Signed-off-by: Simon Alling <alling.simon@gmail.com>
The completion of charts was using 'helm search repo' which can be
quite slow as it must parse the entire yaml of every repo cache file.
Using completion for a chart name can end up triggering multiple calls
to 'helm search'; this makes the user experience poor, as there is
a delay of over a second at every <TAB> press.
This commit creates a cache file for each repo which contains the list
of charts for that repo. The completion logic then uses this new
cache file directly and obtains the chart names very quickly.
With only the stable repo configured, this optimization makes the
completion of charts about 85 times faster, going from 1.2 seconds to
0.014 seconds; such a difference gives a much better user experience
when completing chart names.
On the other hand, adding the creation of the chart list cache file to
'helm repo update' or 'helm repo add' is pretty much negligible compared
to the downloading of the index file.
It is also worth noting that when more repos are configured,
'helm search repo' only becomes slower, while the completion logic that
uses the new chart list cache file will not be affected as it only looks
for the single relevant repo file.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
I was looking into the `get` command, and got tripped up by the
`Version` variable. It was unclear to me what Version represents, since
it's called REVISION when doing e.g., `helm list`.
But even after knowing this, it was not very clear to me why we
(implicitly) set the Version variable to 0 but never seem to use it.
`mhickey` explained to me on Slack that this gets the latest revision of
the release. Makes sense, but I added a comment about that too, to
clarify.
Signed-off-by: Andreas Lindhé <andreas@lindhe.io>
* Include serviceAccount.annotations value
Signed-off-by: Naseem <naseemkullah@gmail.com>
* Add comment about service account annotations
Signed-off-by: Naseem <naseemkullah@gmail.com>
Service accounts must be installed before secrets when service account tokens (secrets) are be managed by Helm. Otherwise Kubernetes will delete any service account token right after creation, since there is no service account mounting the token (see https://kubernetes.io/docs/reference/access-authn-authz/service-accounts-admin/#token-controller)
Closes#7159.
Signed-off-by: Daniel Strobusch <1847260+dastrobu@users.noreply.github.com>
Fixes issue #7279.
Prevent the deletion of CRDs that were defined in the `templates/`
directory. This makes CRD deletion behaviour consistent with Helm
documentation:
> CRDs are never deleted. Deleting a CRD automatically deletes all of the
> CRD’s contents across all namespaces in the cluster. Consequently, Helm
> will not delete CRDs.
Previous the documentation only applied to CRDs that were defined in the
`crds/` directory. It did not consider that Charts could have CRDs in the
`templates/` directory (for example charts that were written before the
`crds/` directory feature or if the Chart author needed templated CRDs).
Signed-off-by: Phil Grayson <phil@philgrayson.com>
Mercurial VCS (hg) backout's can generate '.orig' files
to avoid these being picked, generate a .helmignore where
also the .orig files are ignored.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
* Port watcher with retries to wait for resources
Port of Helm 2 PR #6014 to Helm 3
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Add fix from PR #6907
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
Add intervening line into lazypath.go, so that license is
not treated by godoc as a package description.
Standardize license comment for xdg package.
Add missing package descriptions.
Signed-off-by: Jakub Bielecki <jakub.bielecki@codilime.com>
The 'helm install' command returned confusing error messages if a flag was misspecified (e.g. `helm install name chart --set value foo`). This lead to an error indicating that a name should be specified for the command. Now an explicit check is done on the number of arguments passed, returning a message indicating the invalid arguments (`foo` in the example`).
Closes#7225
Signed-off-by: Lennard Eijsackers <lennardeijsackers92@gmail.com>
The existing unit test doesn't cover the most important functionality
of filterList(). Adding that check. Separately test the specific
namespace-related behavior.
Remove the dead variable anotherOldOne.
Signed-off-by: Jakub Bielecki <jakub.bielecki@codilime.com>
* Include requirements.* as Files in APIVersionV1
Fixes#6974.
This ensures that when reading a Chart marked with APIVersion v1, we
maintain the behaviour of Helm v2 and include the requirements.yaml and
requirements.lock in the Files collection, and hence produce charts that
work correctly with Helm v2.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
* Write out requirements.lock for APIVersion1 Charts
This keeps the on-disk format consistent after `helm dependency update`
of an APIVersion1 Chart.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
* Exclude 'dependencies' from APVersion1 Chart.yaml
This fixes `helm lint` against an APIVersion1 chart packaged with Helm
v3.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
* Generate APIVersion v2 charts for dependency tests
As the generated chart contains no requirements.yaml in its files list,
but has dependencies in its metadata, it is not a valid APIVersion v1
chart.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
* Generate APIVersion v2 charts for manager tests
Specifically for the charts that have dependencies, the generated chart
contains no requirements.yaml in its files but has dependencies in its
metadata. Hence it is not a valid APIVersion v1 chart.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
When enabled, during the rendering process, this feature flag will not validate rendered templates against the Kubernetes OpenAPI Schema.
Signed-off-by: Matthew Fisher <matt.fisher@microsoft.com>
* fix(helm): add --description flag to 'helm install', 'helm upgrade', and 'helm uninstall'
When added, this flag allow us to add a custom description to the release. E.g. '--description "my custom description"'
Closes#7033
Signed-off-by: Juan Matias Kungfu de la Camara Beovide <juanmatias@gmail.com>
* fix(helm): fixed style issues on top of previous commit (3a43a9a487)
Closes#7033
Signed-off-by: Juan Matias Kungfu de la Camara Beovide <juanmatias@gmail.com>
* fix(helm): fixed wrong test issue on top of previous commit (3a43a9a)
Closes#7033
Signed-off-by: Juan Matias Kungfu de la Camara Beovide <juanmatias@gmail.com>
Fixes a few bugs related to tls config when installing charts:
1. When installing via relative path, tls config for the selected
repository was not being set.
2. The `--ca-file` flag was not being passed when constructing the
downloader.
3. Setting tls config was not checking for zero value in repo
config, causing flag to get overwritten with empty string.
There's still a few oddities here. I would expect that the flag
passed in on the command line would override the repo config, but
that's not currently the case. Also, we always set the cert, key
and ca files as a trio, when they should be set individually
depending on combination of flags / repo config.
Signed-off-by: James McElwain <jmcelwain@gmail.com>
The 'helm get values' has its own Run() method in the action package.
So, unlike the other 'get' variants, it needs to check for the
reachability of the cluster itself.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
Adding unit tests for an issue that has come up multiple times
where the archive processing code doesn't take into account the
`tar.TypeXHeader` / `tar.TypeXGlobalHeader` entries that GitHub
adds when creating a release archive for a chart, for example
`https://github.com/org/repo/master.tar.gz`.
Signed-off-by: Geoff Baskwill <me@geoffbaskwill.ca>
When reporting an incompatible Kubernetes version, due to a version constraint from the kubeVersion field, the error message should report with the correct field name.
Signed-off-by: Daniel Strobusch <1847260+dastrobu@users.noreply.github.com>
This was a missed update when we updated the k8s libraries. I validated
that this works for CRD installs with v1beta1 and v1
Signed-off-by: Taylor Thomas <taylor.thomas@microsoft.com>
`Update()` gets repo names before resolving a lock file by calling
`resolveRepoNames(req)`. But that method changes aliased repo URLs into
the actual URLs. That makes digests from `helm update` and `helm build`
be different for each other.
To make them in sync, setting actual (resolved) repo URLs into the
loaded chart during `helm build` is necessary. Thus, this commit adds an
extra step in the `Build()` implementation.
For comments, this commit also changes the name of `getRepoNames()` into
`resolveRepoNames()` to avoid misunderstanding since getters are
expected to not mutate their input data in general.
Signed-off-by: Hang Park <hangpark@kaist.ac.kr>
This blocks a particular error (caused by upstream discovery client),
printing a warning instead of failing. It's not a great solution, but is
a stop-gap until Client-Go gets fixed.
Closes#6361
Signed-off-by: Matt Butcher <matt.butcher@microsoft.com>
When 'helm3 lint <chart-name>.tar.gz' is run, this will lint Chart.yaml in the package
Closes#6535
Signed-off-by: Kamalashree N <nagaraj.kamalashree@gmail.com>
This port fixes the bug #6820 for helm3
which was fixed in helm2 with the pull request 4850
https://github.com/helm/helm/pull/4850
Signed-off-by: Lam Le <lam281990@gmail.com>
The sorting method for manifests contained a check to see if the API
version existed. This violates separation of concerns as the sorter
should just sort and leave validation to other parts of the code.
Signed-off-by: Taylor Thomas <taylor.thomas@microsoft.com>
To make digests include information about Chart.yaml dependencies, not
only the lock file, digest calculation is changed to accept both
contents. This terminates the `dep build` command if Chart.yaml
dependencies have been updated so that `dep up` should be executed
properly, to prevent downloading wrong versions or mismatched subcharts.
Note that previous Helm cannot know whether Chart.yaml dependencies were changed
or not since the Chart.lock's digest is calculated by only Chart.lock
contents, which don't include information about SemVer ranges and extra
dependency fields such as aliases, conditions, and tags. Specially,
SemVer can be written as a version range in Chart.yaml, but Chart.lock
has the specific, resolved version of that range.
Signed-off-by: Hang Park <hangpark@kaist.ac.kr>