Note, randInt is now a function in sprig so the failing test needed
to be updated to a function that does not exist.
Signed-off-by: Matt Farina <matt@mattfarina.com>
Variable values `helm.sh/resource-policy` and `keep` are duplicately
defined in resource_policy.go (`resourcePolicyAnno` `keepPolicy`) and
resource_policy.go (`ResourcePolicyAnno` `KeepPolicy`), remove the
varibales in resource_policy.go to keep the code clean.
Signed-off-by: Liu Ming <hit_oak_tree@126.com>
A fix introduced in #8631 caused a bug in Windows builds due to
a type difference between POSIX and Windows environments. This
change corrects that problem and provides a code comment to warn
others.
Signed-off-by: Matt Farina <matt@mattfarina.com>
When #8156 was merged it had the side effect that all hooks were
run all the time. All the hooks were put in the flow of the
content rendered and sent to Kubernetes on every command.
For example, if you ran the following 2 commands the test hooks
would run:
helm create foo
helm install foo ./foo
This should not run any hooks. But, the generated test hook is run.
The change in this commit moves the writing of the hooks to output
or disk back into the template command rather than in a private
function within the actions. This is where it was for v3.2.
One side effect is that post renderers will not work on hooks. This
was the case in v3.2. Since this bug is blocking the release of v3.3.0
it is being rolled back. A refactor effort is underway for this section
of code. post renderer for hooks should be added back as part of that
work. Since post renderer hooks did not make it into a release it
is ok to roll it back for now.
There is code in the cmd/helm package that has been duplicated from
pkg/action. This is a temporary measure to fix the immediate bug
with plans to correct the situation as part of a refactor
of renderResources.
Signed-off-by: Matt Farina <matt@mattfarina.com>
If two `helm upgrade`s are executed at the exact same time, then one of
the invocations will fail with "already exists".
If one `helm upgrade` is executed and a second one is started while the
first is in `pending-upgrade`, then the second invocation will create a
new release. Effectively, two helm invocations will simultaneously
change the state of Kubernetes resources -- which is scary -- then two
releases will be in `deployed` state -- which can cause other issues.
This commit fixes the corrupted storage problem, by introducting a poor
person's lock. If the last release is in a pending state, then helm will
abort. If the last release is in a pending state, due to a previously
killed helm, then the user is expected to do `helm rollback`.
Closes#7274
Signed-off-by: Cristian Klein <cristian.klein@elastisys.com>
* fix(template):Issue:helm template with --output-dir doesn't write template with a hook to file
Close#7836
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
* fix go file style
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
* fix go file style
Signed-off-by: Dong Gang <dong.gang@daocloud.io>
Previously, the `helm ls --$state` operation would display outdated
releases under certain conditions.
Given the following set of releases:
```
NAME REVISION UPDATED STATUS CHART APP VERSION NAMESPACE
bar 1 Wed Apr 8 16:54:39 2020 DEPLOYED bar-4.0.0 1.0 default
foo 1 Fri Feb 7 06:16:56 2020 DEPLOYED foo-0.1.0 1.0 default
foo 2 Mon May 4 07:16:56 2020 FAILED foo-0.1.0 1.0 default
foo 3 Mon May 4 07:20:00 2020 FAILED foo-0.1.0 1.0 default
foo 4 Tue May 5 08:16:56 2020 DEPLOYED foo-0.2.0 1.0 default
qux 1 Tue Jun 9 10:32:00 2020 DEPLOYED qux-4.0.3 1.0 default
qux 2 Tue Jun 9 10:57:00 2020 FAILED qux-4.0.3 1.0 default
```
`helm ls --failed` produced the following output:
```
NAME REVISION UPDATED STATUS CHART APP VERSION NAMESPACE
foo 3 Mon May 4 07:20:00 2020 FAILED foo-0.1.0 1.0 default
qux 2 Tue Jun 9 10:57:00 2020 FAILED qux-4.0.0 1.0 default
```
Including the `qux` release in that `helm ls --failed` output is not
controversial; the most recent revision of `qux` was not successful
and an operator should investigate.
Including the `foo` release in the output, however, is
questionable. Revision 3 of `foo` is _not_ the most recent release of
`foo`, and that FAILED release was fixed in a susubsequent upgrade. A
user may see that FAILED deploy and start taking inappropriate
action. Further, that issue was fixed months ago in this example --
troubleshooting an old deploy may not be safe if significant changes
have occurred. Concern over this behavior was raised in
https://github.com/helm/helm/issues/7495.
This behavior applied to all the state filter flags (--deployed,
--failed, --pending, etc.), and a user could pass multiple state
filter flags to a single command. The previous behavior can be
summarized as follows:
For each release name, all release revisions having any of the
supplied state flags were retrieved, and the most recent revision
among these was returned (regardless of whether a newer revision of an
unspecified state exists).
This change request alters the helm list action to match user
expectations such that only "current" releases are shown when
filtering on release state. After this change, the following output
would be produced by `helm ls --failed`:
```
NAME REVISION UPDATED STATUS CHART APP VERSION NAMESPACE
qux 2 Tue Jun 9 10:57:00 2020 FAILED qux-4.0.0 1.0 default
```
The command now returns only `qux` because it is the only "current" FAILED release.
This behavior change applies to all the state filters _except_
`superseded`, which now becomes a special case. By definition, at
least one newer release exists ahead of each superseded release. A
conditional is included in this change request to maintain the
preexisting behavior (return "most recent" superseded revison for
each release name) if the superseded state filter is requested.
---
Note that there is an alternate perspective that a state filter flag
should return all releases of a given state rather than only the
"current" releases. In the above example, `helm ls --failed` with this
approach would return the following:
```
NAME REVISION UPDATED STATUS CHART APP VERSION NAMESPACE
foo 2 Mon May 4 07:16:56 2020 FAILED foo-0.1.0 1.0 default
foo 3 Mon May 4 07:20:00 2020 FAILED foo-0.1.0 1.0 default
qux 2 Tue Jun 9 10:57:00 2020 FAILED qux-4.0.0 1.0 default
```
Multiple FAILED `foo` revisions are included in the output, unlike the current behavior.
This approach is logical and achievable. It allows a user to find
exactly what is requested: all historical releases of a given
state. In order to achieve continuity with helm behavior, however, a
new filter (something like "current") would probably need to be
implemented and become the new default.
Given current helm behavior as well as the comments in the #7495, I
did not pursue this approach.
---
Technical details:
- Moved list action state mask filter after latest release filter
Previously, the list operation in helm/pkg/action/list.go skipped
releases that were not covered by the state mask on _retrieval_ from
the Releases store:
```
results, err := l.cfg.Releases.List(func(rel *release.Release) bool {
// Skip anything that the mask doesn't cover
currentStatus := l.StateMask.FromName(rel.Info.Status.String())
if l.StateMask¤tStatus == 0 {
return false
}
...
```
8ea6b970ec/pkg/action/list.go (L154-L159)
While filtering on retrieval in this manner avoided an extra iteration
through the entire list to check on the supplied condition later, it
introduced the possibility of returning an outdated release to the
user because newer releases (that would have otherwise squashed
outdated releases in the `filterList` function) are simply not
included in the set of working records.
This change moves the state mask filtering process to _after_ the set
of current releases is built. Outdated, potentially misleading
releases are scrubbed out prior to the application of the state mask
filter.
As written, this state mask filtration (in the new `filterStateMask`
method on `*List`) incurs an additional, potentially expensive
iteration over the set of releases to return to the user. An
alternative approach could avoid that extra iteration and fit this
logic into the existing `filterList` function at the cost of making
`filterList` function a little harder to understand.
- Rename filterList to filterLatestReleases for clarity
Another function that filters the list is added, so update
to the more descriptive name here.
- List superseded releases without filtering for latest
This change makes superseded releases a special case, as they would
_never_ be displayed otherwise (by definition, as superseded releases have been
replaced by a newer release), so a conditional maintains current
behavior ("return newest superseded revision for each release name")
Fixes#7495.
Signed-off-by: Andrew Melis <andrewmelis@gmail.com>