The unit test added to cover #7233 was causing changes to show up in git
when tests were ran. This was due to the dependency build creating a new
tarball. These changes would cause a dirty build when we build our major
versions, so I removed the subchart tarball from git and added the charts
folder for that test chart to the gitignore to avoid any future problems.
Based on all I can see, this should have any impact on the test itself
Signed-off-by: Taylor Thomas <taylor.thomas@microsoft.com>
* Fix issue with apiVersion v1 lock digest
When apiVersion v1 chart dependencies are built with Helm 2
and then built with Helm 3, the lock digests differ. To avoid
this issue, a depdendency update is forced.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Check against Helm v2 hash
Handle scenario where dependency hash was generated by Helm v2
but need to do a dependency build with Helm v3.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Add unit test
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Refactor unit test
Refactor unit test to use an existing chart as dependency
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Update after review
Comments:
- https://github.com/helm/helm/pull/7261#discussion_r373827088
- https://github.com/helm/helm/pull/7261#discussion_r373827250
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Allow template output to use release name
helm template output command uses the chart name only when writing
templates to disk. This changes will also use the release name
to avoid colloiding the path when output nore than one release
of smae chart.
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
* Update after review
Comment:
- https://github.com/helm/helm/pull/7503/files#r374130090
Signed-off-by: Martin Hickey <martin.hickey@ie.ibm.com>
When doing zsh completion, the -n flag would not be handled properly.
Doing
helm -n<TAB>
would not add the space after the -n.
This was caused by the fact that the -n flag was being swallowed by
the echo command.
To fix this, we use printf instead.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
These flags snuck in through a feature that was reverted and removed in Helm 2, but snuck into Helm 3.
They were never hooked up or used, so they were a no-op. This shouldn't affect anyone.
Signed-off-by: Matthew Fisher <matt.fisher@microsoft.com>
* Fixes#6713 Friedly error message
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
* Fixes#6713 Friedly error message
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
* chaging error to no such file or directory
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
* changed it for the wider stat error messages which comes directly from go standard library.
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
* changed it for the wider stat error messages which comes directly from go standard library.
Signed-off-by: Anshul Verma <ansverma@localhost.localdomain>
The 'home' command was removed for v3, so this commit adapts the tests.
Having an invalid subcommand does not cause problems currently, but
will start causing failures on newer versions of Cobra, which complain
on invalid subcommands.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
To use error codes to indicate completion directive to the completion
script had us use os.Exit() in the __complete command. This prevented
go tests calling the __complete command from succeeding.
Another option was to return an error containing an error code
(like is done for helm plugins) instead of calling os.Exit(). However
such an approach requires a change in how helm handles the returned
error of a Cobra command; although we can do this for Helm, it would
be an annoying requirement for other programs if we ever push this
completion logic into Cobra.
The chosen solution instead is to printout the directive at the end
of the list of completions, and have the completion script extract it.
Note that we print both the completions and directive to stdout.
It would have been interesting to print the completions to stdout and
the directive to stderr; however, it is very complicated for the
completion script to extract both stdout and stderr to different
variables, and even if possible, such code would not be portable to
many shells. Printing both to stdout is much simpler.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
Because the 'settings' variable is a pointer, it cannot be used to store
the original envSettings and then restore them.
Instead, this commit creates an entirely new envSettings, after having
set the environment variables, which may affect it.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
The completion of charts was using 'helm search repo' which can be
quite slow as it must parse the entire yaml of every repo cache file.
Using completion for a chart name can end up triggering multiple calls
to 'helm search'; this makes the user experience poor, as there is
a delay of over a second at every <TAB> press.
This commit creates a cache file for each repo which contains the list
of charts for that repo. The completion logic then uses this new
cache file directly and obtains the chart names very quickly.
With only the stable repo configured, this optimization makes the
completion of charts about 85 times faster, going from 1.2 seconds to
0.014 seconds; such a difference gives a much better user experience
when completing chart names.
On the other hand, adding the creation of the chart list cache file to
'helm repo update' or 'helm repo add' is pretty much negligible compared
to the downloading of the index file.
It is also worth noting that when more repos are configured,
'helm search repo' only becomes slower, while the completion logic that
uses the new chart list cache file will not be affected as it only looks
for the single relevant repo file.
Signed-off-by: Marc Khouzam <marc.khouzam@montreal.ca>
* fix(cmd): Fixes logging on action conf init error
Errors relating to initializing the action config cause helm to exit silently,
except when in debug mode. This now emits the useful error.
Closes#6863
Signed-off-by: Jorge Gasca <jorge.ignacio.gasca@gmail.com>
* Remove unnecessary formatting of err struct
Signed-off-by: Jorge Gasca <jorge.ignacio.gasca@gmail.com>
* Include requirements.* as Files in APIVersionV1
Fixes#6974.
This ensures that when reading a Chart marked with APIVersion v1, we
maintain the behaviour of Helm v2 and include the requirements.yaml and
requirements.lock in the Files collection, and hence produce charts that
work correctly with Helm v2.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
* Write out requirements.lock for APIVersion1 Charts
This keeps the on-disk format consistent after `helm dependency update`
of an APIVersion1 Chart.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
* Exclude 'dependencies' from APVersion1 Chart.yaml
This fixes `helm lint` against an APIVersion1 chart packaged with Helm
v3.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
* Generate APIVersion v2 charts for dependency tests
As the generated chart contains no requirements.yaml in its files list,
but has dependencies in its metadata, it is not a valid APIVersion v1
chart.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
* Generate APIVersion v2 charts for manager tests
Specifically for the charts that have dependencies, the generated chart
contains no requirements.yaml in its files but has dependencies in its
metadata. Hence it is not a valid APIVersion v1 chart.
Signed-off-by: Paul "Hampy" Hampson <p_hampson@wargaming.net>
Matthew Fisher
Taylor Thomas
Marc Khouzam
Martin Hickey
Mike Tougeron
Karuppiah Natarajan
Nick Lee
Lee Bontecou
Anshul Verma
Matt Farina
etashsingh
海的澜色
Jorge I. Gasca
Xiang Dai
Anton Kvashenkin
Frank Lin PIAT
Josh Soref
Andreas Sommer
Jason Pickens
kvendingoldo
Paul "TBBle" Hampson