From 9dce1ac88b185bbe9028b7c1b3b35471e7a80e3a Mon Sep 17 00:00:00 2001 From: Matthew Fisher Date: Wed, 7 Nov 2018 07:26:19 -0800 Subject: [PATCH] s,kubernetes/charts,helm/charts,g (#4889) Signed-off-by: Matthew Fisher --- docs/chart_repository.md | 6 +- docs/chart_template_guide/builtin_objects.md | 2 +- docs/chart_template_guide/wrapping_up.md | 2 +- docs/charts.md | 58 +++++++------- docs/charts_tips_and_tricks.md | 8 +- docs/provenance.md | 6 +- docs/release_checklist.md | 2 +- docs/using_helm.md | 18 ++--- .../cache/testing-basicauth-index.yaml | 2 +- .../repository/cache/testing-https-index.yaml | 2 +- .../repository/cache/testing-index.yaml | 2 +- .../cache/testing-relative-index.yaml | 4 +- ...testing-relative-trailing-slash-index.yaml | 4 +- .../repository/cache/stable-index.yaml | 76 +++++++++---------- 14 files changed, 96 insertions(+), 96 deletions(-) diff --git a/docs/chart_repository.md b/docs/chart_repository.md index 91ae3a3c4..5291f65e4 100644 --- a/docs/chart_repository.md +++ b/docs/chart_repository.md @@ -5,7 +5,7 @@ high level, a chart repository is a location where packaged charts can be stored and shared. The official chart repository is maintained by the -[Kubernetes Charts](https://github.com/kubernetes/charts), and we welcome +[Helm Charts](https://github.com/helm/charts), and we welcome participation. But Helm also makes it easy to create and run your own chart repository. This guide explains how to do so. @@ -99,7 +99,7 @@ entries: home: https://k8s.io/helm name: nginx sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - https://technosophos.github.io/tscharts/nginx-1.1.0.tgz version: 1.1.0 @@ -143,7 +143,7 @@ Congratulations, now you have an empty GCS bucket ready to serve charts! You may upload your chart repository using the Google Cloud Storage command line tool, or using the GCS web UI. This is the technique the official Kubernetes Charts repository hosts its charts, so you may want to take a -[peek at that project](https://github.com/kubernetes/charts) if you get stuck. +[peek at that project](https://github.com/helm/charts) if you get stuck. **Note:** A public GCS bucket can be accessed via simple HTTPS at this address `https://bucket-name.storage.googleapis.com/`. diff --git a/docs/chart_template_guide/builtin_objects.md b/docs/chart_template_guide/builtin_objects.md index 2108940ec..f7b2857bc 100644 --- a/docs/chart_template_guide/builtin_objects.md +++ b/docs/chart_template_guide/builtin_objects.md @@ -31,5 +31,5 @@ In the previous section, we use `{{.Release.Name}}` to insert the name of a rele The values are available to any top-level template. As we will see later, this does not necessarily mean that they will be available _everywhere_. -The built-in values always begin with a capital letter. This is in keeping with Go's naming convention. When you create your own names, you are free to use a convention that suits your team. Some teams, like the [Kubernetes Charts](https://github.com/kubernetes/charts) team, choose to use only initial lower case letters in order to distinguish local names from those built-in. In this guide, we follow that convention. +The built-in values always begin with a capital letter. This is in keeping with Go's naming convention. When you create your own names, you are free to use a convention that suits your team. Some teams, like the [Helm Charts](https://github.com/helm/charts) team, choose to use only initial lower case letters in order to distinguish local names from those built-in. In this guide, we follow that convention. diff --git a/docs/chart_template_guide/wrapping_up.md b/docs/chart_template_guide/wrapping_up.md index 6a96632bd..ea5dc1183 100755 --- a/docs/chart_template_guide/wrapping_up.md +++ b/docs/chart_template_guide/wrapping_up.md @@ -4,7 +4,7 @@ This guide is intended to give you, the chart developer, a strong understanding But there are many things this guide has not covered when it comes to the practical day-to-day development of charts. Here are some useful pointers to other documentation that will help you as you create new charts: -- The [Kubernetes Charts project](https://github.com/kubernetes/charts) is an indispensable source of charts. That project is also sets the standard for best practices in chart development. +- The [Helm Charts project](https://github.com/helm/charts) is an indispensable source of charts. That project is also sets the standard for best practices in chart development. - The Kubernetes [User's Guide](http://kubernetes.io/docs/user-guide/) provides detailed examples of the various resource kinds that you can use, from ConfigMaps and Secrets to DaemonSets and Deployments. - The Helm [Charts Guide](../charts.md) explains the workflow of using charts. - The Helm [Chart Hooks Guide](../charts_hooks.md) explains how to create lifecycle hooks. diff --git a/docs/charts.md b/docs/charts.md index 669d90164..2f7605350 100644 --- a/docs/charts.md +++ b/docs/charts.md @@ -114,7 +114,7 @@ to mark a chart as deprecated. If the **latest** version of a chart in the repository is marked as deprecated, then the chart as a whole is considered to be deprecated. The chart name can later be reused by publishing a newer version that is not marked as deprecated. The workflow for deprecating charts, as -followed by the [kubernetes/charts](https://github.com/kubernetes/charts) +followed by the [helm/charts](https://github.com/helm/charts) project is: - Update chart's `Chart.yaml` to mark the chart as deprecated, bumping the version @@ -142,9 +142,9 @@ for greater detail. ## Chart Dependencies -In Helm, one chart may depend on any number of other charts. +In Helm, one chart may depend on any number of other charts. These dependencies can be dynamically linked through the `requirements.yaml` -file or brought in to the `charts/` directory and managed manually. +file or brought in to the `charts/` directory and managed manually. Although manually managing your dependencies has a few advantages some teams need, the preferred method of declaring dependencies is by using a @@ -291,11 +291,11 @@ tags: In the above example all charts with the tag `front-end` would be disabled but since the `subchart1.enabled` path evaluates to 'true' in the parent's values, the condition will override the -`front-end` tag and `subchart1` will be enabled. +`front-end` tag and `subchart1` will be enabled. Since `subchart2` is tagged with `back-end` and that tag evaluates to `true`, `subchart2` will be enabled. Also notes that although `subchart2` has a condition specified in `requirements.yaml`, there -is no corresponding path and value in the parent's values so that condition has no effect. +is no corresponding path and value in the parent's values so that condition has no effect. ##### Using the CLI with Tags and Conditions @@ -317,19 +317,19 @@ helm install --set tags.front-end=true --set subchart2.enabled=false #### Importing Child Values via requirements.yaml -In some cases it is desirable to allow a child chart's values to propagate to the parent chart and be -shared as common defaults. An additional benefit of using the `exports` format is that it will enable future +In some cases it is desirable to allow a child chart's values to propagate to the parent chart and be +shared as common defaults. An additional benefit of using the `exports` format is that it will enable future tooling to introspect user-settable values. -The keys containing the values to be imported can be specified in the parent chart's `requirements.yaml` file -using a YAML list. Each item in the list is a key which is imported from the child chart's `exports` field. +The keys containing the values to be imported can be specified in the parent chart's `requirements.yaml` file +using a YAML list. Each item in the list is a key which is imported from the child chart's `exports` field. To import values not contained in the `exports` key, use the [child-parent](#using-the-child-parent-format) format. Examples of both formats are described below. ##### Using the exports format -If a child chart's `values.yaml` file contains an `exports` field at the root, its contents may be imported +If a child chart's `values.yaml` file contains an `exports` field at the root, its contents may be imported directly into the parent's values by specifying the keys to import as in the example below: ```yaml @@ -346,8 +346,8 @@ exports: myint: 99 ``` -Since we are specifying the key `data` in our import list, Helm looks in the `exports` field of the child -chart for `data` key and imports its contents. +Since we are specifying the key `data` in our import list, Helm looks in the `exports` field of the child +chart for `data` key and imports its contents. The final parent values would contain our exported field: @@ -358,16 +358,16 @@ myint: 99 ``` -Please note the parent key `data` is not contained in the parent's final values. If you need to specify the -parent key, use the 'child-parent' format. +Please note the parent key `data` is not contained in the parent's final values. If you need to specify the +parent key, use the 'child-parent' format. ##### Using the child-parent format -To access values that are not contained in the `exports` key of the child chart's values, you will need to -specify the source key of the values to be imported (`child`) and the destination path in the parent chart's +To access values that are not contained in the `exports` key of the child chart's values, you will need to +specify the source key of the values to be imported (`child`) and the destination path in the parent chart's values (`parent`). -The `import-values` in the example below instructs Helm to take any values found at `child:` path and copy them +The `import-values` in the example below instructs Helm to take any values found at `child:` path and copy them to the parent's values at the path specified in `parent:` ```yaml @@ -382,7 +382,7 @@ dependencies: parent: myimports ``` In the above example, values found at `default.data` in the subchart1's values will be imported -to the `myimports` key in the parent chart's values as detailed below: +to the `myimports` key in the parent chart's values as detailed below: ```yaml # parent's values.yaml file @@ -391,7 +391,7 @@ myimports: myint: 0 mybool: false mystring: "helm rocks!" - + ``` ```yaml # subchart1's values.yaml file @@ -400,7 +400,7 @@ default: data: myint: 999 mybool: true - + ``` The parent chart's resulting values would be: @@ -468,7 +468,7 @@ Furthermore, A is dependent on chart B that creates objects - replicaset "B-ReplicaSet" - service "B-Service" -After installation/upgrade of chart A a single Helm release is created/modified. The release will +After installation/upgrade of chart A a single Helm release is created/modified. The release will create/update all of the above Kubernetes objects in the following order: - A-Namespace @@ -478,16 +478,16 @@ create/update all of the above Kubernetes objects in the following order: - A-Service - B-Service -This is because when Helm installs/upgrades charts, -the Kubernetes objects from the charts and all its dependencies are +This is because when Helm installs/upgrades charts, +the Kubernetes objects from the charts and all its dependencies are -- aggregrated into a single set; then -- sorted by type followed by name; and then -- created/updated in that order. +- aggregrated into a single set; then +- sorted by type followed by name; and then +- created/updated in that order. Hence a single release is created with all the objects for the chart and its dependencies. -The install order of Kubernetes types is given by the enumeration InstallOrder in kind_sorter.go +The install order of Kubernetes types is given by the enumeration InstallOrder in kind_sorter.go (see [the Helm source file](https://github.com/helm/helm/blob/master/pkg/tiller/kind_sorter.go#L26)). ## Templates and Values @@ -560,8 +560,8 @@ It can use the following four template values (usually defined in a All of these values are defined by the template author. Helm does not require or dictate parameters. -To see many working charts, check out the [Kubernetes Charts -project](https://github.com/kubernetes/charts) +To see many working charts, check out the [Helm Charts +project](https://github.com/helm/charts) ### Predefined Values diff --git a/docs/charts_tips_and_tricks.md b/docs/charts_tips_and_tricks.md index a83b44457..f1751b1b5 100644 --- a/docs/charts_tips_and_tricks.md +++ b/docs/charts_tips_and_tricks.md @@ -109,7 +109,7 @@ to render and exit when .Values.foo is undefined. ## Using the 'tpl' Function The `tpl` function allows developers to evaluate strings as templates inside a template. -This is useful to pass a template string as a value to a chart or render external configuration files. +This is useful to pass a template string as a value to a chart or render external configuration files. Syntax: `{{ tpl TEMPLATE_STRING VALUES }}` Examples: @@ -152,7 +152,7 @@ imageCredentials: registry: quay.io username: someone password: sillyness -``` +``` We then define our helper template as follows: ``` @@ -182,7 +182,7 @@ deployment spec itself didn't change the application keeps running with the old configuration resulting in an inconsistent deployment. The `sha256sum` function can be used to ensure a deployment's -annotation section is updated if another file changes: +annotation section is updated if another file changes: ```yaml kind: Deployment @@ -232,7 +232,7 @@ by convention, helper templates and partials are placed in a ## Complex Charts with Many Dependencies -Many of the charts in the [official charts repository](https://github.com/kubernetes/charts) +Many of the charts in the [official charts repository](https://github.com/helm/charts) are "building blocks" for creating more advanced applications. But charts may be used to create instances of large-scale applications. In such cases, a single umbrella chart may have multiple subcharts, each of which functions as a piece diff --git a/docs/provenance.md b/docs/provenance.md index 3a19fcd07..163e72842 100644 --- a/docs/provenance.md +++ b/docs/provenance.md @@ -27,7 +27,7 @@ Prerequisites: **NOTE:** If your PGP private key has a passphrase, you will be prompted to enter that passphrase for any commands that support the `--sign` option. You can set the -HELM_KEY_PASSPHRASE environment variable to that passphrase in case you don't want +HELM_KEY_PASSPHRASE environment variable to that passphrase in case you don't want to be prompted to enter the passphrase. **NOTE:** The keyfile format for GnuPG changed in version 2.1. Prior to that release @@ -261,9 +261,9 @@ in using the provenance system: - Keybase also has fabulous documentation available - While we haven't tested it, Keybase's "secure website" feature could be used to serve Helm charts. -- The [official Kubernetes Charts project](https://github.com/kubernetes/charts) +- The [official Helm Charts project](https://github.com/helm/charts) is trying to solve this problem for the official chart repository. - - There is a long issue there [detailing the current thoughts](https://github.com/kubernetes/charts/issues/23). + - There is a long issue there [detailing the current thoughts](https://github.com/helm/charts/issues/23). - The basic idea is that an official "chart reviewer" signs charts with her or his key, and the resulting provenance file is then uploaded to the chart repository. diff --git a/docs/release_checklist.md b/docs/release_checklist.md index 9213b4c1f..c69db9d21 100644 --- a/docs/release_checklist.md +++ b/docs/release_checklist.md @@ -224,7 +224,7 @@ The community keeps growing, and we'd love to see you there! - `#helm-users` for questions and just to hang out - `#helm-dev` for discussing PRs, code, and bugs - Hang out at the Public Developer Call: Thursday, 9:30 Pacific via [Zoom](https://zoom.us/j/696660622) -- Test, debug, and contribute charts: [GitHub/kubernetes/charts](https://github.com/kubernetes/charts) +- Test, debug, and contribute charts: [GitHub/helm/charts](https://github.com/helm/charts) ## Installation and Upgrading diff --git a/docs/using_helm.md b/docs/using_helm.md index 4b18e2cf2..5716a1302 100755 --- a/docs/using_helm.md +++ b/docs/using_helm.md @@ -63,7 +63,7 @@ stable/mysql 0.1.0 Chart for MySQL stable/mariadb 0.5.1 Chart for MariaDB ``` -Now you will only see the results that match your filter. +Now you will only see the results that match your filter. Why is `mariadb` in the list? Because its package description relates it to @@ -231,7 +231,7 @@ There are two ways to pass configuration data during install: If both are used, `--set` values are merged into `--values` with higher precedence. Overrides specified with `--set` are persisted in a configmap. Values that have been -`--set` can be viewed for a given release with `helm get values `. +`--set` can be viewed for a given release with `helm get values `. Values that have been `--set` can be cleared by running `helm upgrade` with `--reset-values` specified. @@ -405,11 +405,11 @@ is not a full list of cli flags. To see a description of all flags, just run This defaults to 300 (5 minutes) - `--wait`: Waits until all Pods are in a ready state, PVCs are bound, Deployments have minimum (`Desired` minus `maxUnavailable`) Pods in ready state and - Services have an IP address (and Ingress if a `LoadBalancer`) before - marking the release as successful. It will wait for as long as the - `--timeout` value. If timeout is reached, the release will be marked as - `FAILED`. Note: In scenario where Deployment has `replicas` set to 1 and - `maxUnavailable` is not set to 0 as part of rolling update strategy, + Services have an IP address (and Ingress if a `LoadBalancer`) before + marking the release as successful. It will wait for as long as the + `--timeout` value. If timeout is reached, the release will be marked as + `FAILED`. Note: In scenario where Deployment has `replicas` set to 1 and + `maxUnavailable` is not set to 0 as part of rolling update strategy, `--wait` will return as ready as it has satisfied the minimum Pod in ready condition. - `--no-hooks`: This skips running hooks for the command - `--recreate-pods` (only available for `upgrade` and `rollback`): This flag @@ -518,8 +518,8 @@ $ helm install ./deis-workflow-0.1.0.tgz Charts that are archived can be loaded into chart repositories. See the documentation for your chart repository server to learn how to upload. -Note: The `stable` repository is managed on the [Kubernetes Charts -GitHub repository](https://github.com/kubernetes/charts). That project +Note: The `stable` repository is managed on the [Helm Charts +GitHub repository](https://github.com/helm/charts). That project accepts chart source code, and (after audit) packages those for you. ## Tiller, Namespaces and RBAC diff --git a/pkg/downloader/testdata/helmhome/repository/cache/testing-basicauth-index.yaml b/pkg/downloader/testdata/helmhome/repository/cache/testing-basicauth-index.yaml index 47bb1b77c..b90c4e232 100644 --- a/pkg/downloader/testdata/helmhome/repository/cache/testing-basicauth-index.yaml +++ b/pkg/downloader/testdata/helmhome/repository/cache/testing-basicauth-index.yaml @@ -8,7 +8,7 @@ entries: keywords: [] maintainers: [] sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - http://username:password@example.com/foo-1.2.3.tgz version: 1.2.3 diff --git a/pkg/downloader/testdata/helmhome/repository/cache/testing-https-index.yaml b/pkg/downloader/testdata/helmhome/repository/cache/testing-https-index.yaml index 872478c3f..37a74c9c1 100644 --- a/pkg/downloader/testdata/helmhome/repository/cache/testing-https-index.yaml +++ b/pkg/downloader/testdata/helmhome/repository/cache/testing-https-index.yaml @@ -8,7 +8,7 @@ entries: keywords: [] maintainers: [] sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - https://example.com/foo-1.2.3.tgz version: 1.2.3 diff --git a/pkg/downloader/testdata/helmhome/repository/cache/testing-index.yaml b/pkg/downloader/testdata/helmhome/repository/cache/testing-index.yaml index 7543a59f5..75fcfdc69 100644 --- a/pkg/downloader/testdata/helmhome/repository/cache/testing-index.yaml +++ b/pkg/downloader/testdata/helmhome/repository/cache/testing-index.yaml @@ -36,7 +36,7 @@ entries: keywords: [] maintainers: [] sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - http://example.com/foo-1.2.3.tgz version: 1.2.3 diff --git a/pkg/downloader/testdata/helmhome/repository/cache/testing-relative-index.yaml b/pkg/downloader/testdata/helmhome/repository/cache/testing-relative-index.yaml index 210f92e45..987e2861a 100644 --- a/pkg/downloader/testdata/helmhome/repository/cache/testing-relative-index.yaml +++ b/pkg/downloader/testdata/helmhome/repository/cache/testing-relative-index.yaml @@ -8,7 +8,7 @@ entries: keywords: [] maintainers: [] sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - charts/foo-1.2.3.tgz version: 1.2.3 @@ -21,7 +21,7 @@ entries: keywords: [] maintainers: [] sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - bar-1.2.3.tgz version: 1.2.3 diff --git a/pkg/downloader/testdata/helmhome/repository/cache/testing-relative-trailing-slash-index.yaml b/pkg/downloader/testdata/helmhome/repository/cache/testing-relative-trailing-slash-index.yaml index 210f92e45..987e2861a 100644 --- a/pkg/downloader/testdata/helmhome/repository/cache/testing-relative-trailing-slash-index.yaml +++ b/pkg/downloader/testdata/helmhome/repository/cache/testing-relative-trailing-slash-index.yaml @@ -8,7 +8,7 @@ entries: keywords: [] maintainers: [] sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - charts/foo-1.2.3.tgz version: 1.2.3 @@ -21,7 +21,7 @@ entries: keywords: [] maintainers: [] sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - bar-1.2.3.tgz version: 1.2.3 diff --git a/pkg/getter/testdata/repository/cache/stable-index.yaml b/pkg/getter/testdata/repository/cache/stable-index.yaml index bf187e3df..d4f883a25 100644 --- a/pkg/getter/testdata/repository/cache/stable-index.yaml +++ b/pkg/getter/testdata/repository/cache/stable-index.yaml @@ -214,7 +214,7 @@ entries: name: concourse sources: - https://github.com/concourse/bin - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - https://kubernetes-charts.storage.googleapis.com/concourse-0.1.3.tgz version: 0.1.3 @@ -234,7 +234,7 @@ entries: name: concourse sources: - https://github.com/concourse/bin - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - https://kubernetes-charts.storage.googleapis.com/concourse-0.1.2.tgz version: 0.1.2 @@ -254,7 +254,7 @@ entries: name: concourse sources: - https://github.com/concourse/bin - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - https://kubernetes-charts.storage.googleapis.com/concourse-0.1.1.tgz version: 0.1.1 @@ -273,7 +273,7 @@ entries: name: concourse sources: - https://github.com/concourse/bin - - https://github.com/kubernetes/charts + - https://github.com/helm/charts urls: - https://kubernetes-charts.storage.googleapis.com/concourse-0.1.0.tgz version: 0.1.0 @@ -3985,7 +3985,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.2.6.tgz @@ -4006,7 +4006,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.2.5.tgz @@ -4025,7 +4025,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.2.4.tgz @@ -4044,7 +4044,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.2.3.tgz @@ -4063,7 +4063,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.2.2.tgz @@ -4082,7 +4082,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.2.1.tgz @@ -4101,7 +4101,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.2.0.tgz @@ -4120,7 +4120,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.1.2.tgz @@ -4139,7 +4139,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.1.1.tgz @@ -4158,7 +4158,7 @@ entries: name: Vic Iglesias name: mysql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/mysql urls: - https://kubernetes-charts.storage.googleapis.com/mysql-0.1.0.tgz @@ -5034,7 +5034,7 @@ entries: name: Patrick Galbraith name: percona sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/percona urls: - https://kubernetes-charts.storage.googleapis.com/percona-0.1.0.tgz @@ -5404,7 +5404,7 @@ entries: - name: databus23 name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.6.0.tgz @@ -5426,7 +5426,7 @@ entries: - name: databus23 name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.5.1.tgz @@ -5448,7 +5448,7 @@ entries: - name: databus23 name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.5.0.tgz @@ -5470,7 +5470,7 @@ entries: - name: databus23 name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.4.0.tgz @@ -5492,7 +5492,7 @@ entries: - name: databus23 name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.3.4.tgz @@ -5512,7 +5512,7 @@ entries: - name: databus23 name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.3.3.tgz @@ -5532,7 +5532,7 @@ entries: - name: databus23 name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.3.2.tgz @@ -5552,7 +5552,7 @@ entries: - name: databus23 name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.3.1.tgz @@ -5572,7 +5572,7 @@ entries: - name: databus23 name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.3.0.tgz @@ -5591,7 +5591,7 @@ entries: - name: swordbeta name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.2.2.tgz @@ -5610,7 +5610,7 @@ entries: - name: swordbeta name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.2.1.tgz @@ -5629,7 +5629,7 @@ entries: - name: swordbeta name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.2.0.tgz @@ -5648,7 +5648,7 @@ entries: - name: swordbeta name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.1.1.tgz @@ -5667,7 +5667,7 @@ entries: - name: swordbeta name: postgresql sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/docker-library/postgres urls: - https://kubernetes-charts.storage.googleapis.com/postgresql-0.1.0.tgz @@ -6720,7 +6720,7 @@ entries: sources: - https://bitbucket.org/sapho/ops-docker-tomcat/src - https://hub.docker.com/r/sapho/ops-docker-tomcat - - https://github.com/kubernetes/charts/tree/master/stable/mysql + - https://github.com/helm/charts/tree/master/stable/mysql urls: - https://kubernetes-charts.storage.googleapis.com/sapho-0.1.5.tgz version: 0.1.5 @@ -6738,7 +6738,7 @@ entries: sources: - https://bitbucket.org/sapho/ops-docker-tomcat/src - https://hub.docker.com/r/sapho/ops-docker-tomcat - - https://github.com/kubernetes/charts/tree/master/stable/mysql + - https://github.com/helm/charts/tree/master/stable/mysql urls: - https://kubernetes-charts.storage.googleapis.com/sapho-0.1.4.tgz version: 0.1.4 @@ -6756,7 +6756,7 @@ entries: sources: - https://bitbucket.org/sapho/ops-docker-tomcat/src - https://hub.docker.com/r/sapho/ops-docker-tomcat - - https://github.com/kubernetes/charts/tree/master/stable/mysql + - https://github.com/helm/charts/tree/master/stable/mysql urls: - https://kubernetes-charts.storage.googleapis.com/sapho-0.1.3.tgz version: 0.1.3 @@ -6794,7 +6794,7 @@ entries: name: Shane Starcher name: sensu sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/sstarcher/docker-sensu - https://github.com/sensu/sensu urls: @@ -6815,7 +6815,7 @@ entries: name: Shane Starcher name: sensu sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/sstarcher/docker-sensu - https://github.com/sensu/sensu urls: @@ -6836,7 +6836,7 @@ entries: name: Shane Starcher name: sensu sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/sstarcher/docker-sensu - https://github.com/sensu/sensu urls: @@ -7506,7 +7506,7 @@ entries: name: Shane Starcher name: uchiwa sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/sstarcher/docker-uchiwa - https://github.com/sensu/uchiwa urls: @@ -7528,7 +7528,7 @@ entries: name: Shane Starcher name: uchiwa sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/sstarcher/docker-uchiwa - https://github.com/sensu/uchiwa urls: @@ -7550,7 +7550,7 @@ entries: name: Shane Starcher name: uchiwa sources: - - https://github.com/kubernetes/charts + - https://github.com/helm/charts - https://github.com/sstarcher/docker-uchiwa - https://github.com/sensu/uchiwa urls: