# Hooks
Helm provides a _hook_ mechanism to allow chart developers to intervene
at certain points in a release's life cycle. For example, you can use
hooks to:
- Load a ConfigMap or Secret during install before any other charts are
loaded.
- Execute a Job to back up a database before installing a new chart,
and then execute a second job after the upgrade in order to restore
data.
- Run a Job before deleting a release to gracefully take a service out
of rotation before removing it.
Hooks work like regular templates, but they have special annotations
that cause Helm to utilize them differently. In this section, we cover
the basic usage pattern for hooks.
## The Available Hooks
The following hooks are defined:
- pre-install: Executes after templates are rendered, but before any
resources are created in Kubernetes.
- post-install: Executes after all resources are loaded into Kubernetes
- pre-delete: Executes on a deletion request before any resources are
deleted from Kubernetes.
- post-delete: Executes on a deletion request after all of the release's
resources have been deleted.
- pre-upgrade: Executes on an upgrade request after templates are
rendered, but before any resources are loaded into Kubernetes (e.g.
before a Kubernetes apply operation).
- post-upgrade: Executes on an upgrade after all resources have been
upgraded.
- pre-rollback: Executes on a rollback request after templates are
rendered, but before any resources have been rolled back.
- post-rollback: Executes on a rollback request after all resources
have been modified.
## Hooks and the Release Lifecycle
Hooks allow you, the chart developer, an opportunity to perform
operations at strategic points in a release lifecycle. For example,
consider the lifecycle for a `helm install` . By default, the lifecycle
looks like this:
1. User runs `helm install foo`
2. Chart is loaded into Tiller
3. After some verification, Tiller renders the `foo` templates
4. Tiller loads the resulting resources into Kubernetes
5. Tiller returns the release name (and other data) to the client
6. The client exits
Helm defines two hooks for the `install` lifecycle: `pre-install` and
`post-install` . If the developer of the `foo` chart implements both
hooks, the lifecycle is altered like this:
1. User runs `helm install foo`
2. Chart is loaded into Tiller
3. After some verification, Tiller renders the `foo` templates
4. Tiller prepares to execute the `pre-install` hooks (loading hook resources into
Kubernetes)
5. Tiller sorts hooks by weight (assigning a weight of 0 by default) and by name for those hooks with the same weight in ascending order.
6. Tiller then loads the hook with the lowest weight first (negative to positive)
7. Tiller waits until the hook is "Ready"
8. Tiller loads the resulting resources into Kubernetes. Note that if the `--wait`
flag is set, Tiller will wait until all resources are in a ready state
and will not run the `post-install` hook until they are ready.
9. Tiller executes the `post-install` hook (loading hook resources)
10. Tiller waits until the hook is "Ready"
11. Tiller returns the release name (and other data) to the client
12. The client exits
What does it mean to wait until a hook is ready? This depends on the
resource declared in the hook. If the resources is a `Job` kind, Tiller
will wait until the job successfully runs to completion. And if the job
fails, the release will fail. This is a _blocking operation_ , so the
Helm client will pause while the Job is run.
For all other kinds, as soon as Kubernetes marks the resource as loaded
(added or updated), the resource is considered "Ready". When many
resources are declared in a hook, the resources are executed serially. If they
have hook weights (see below), they are executed in weighted order. Otherwise,
ordering is not guaranteed. (In Helm 2.3.0 and after, they are sorted
alphabetically. That behavior, though, is not considered binding and could change
in the future.) It is considered good practice to add a hook weight, and set it
to `0` if weight is not important.
### Hook resources are not managed with correponding releases
The resources that a hook creates are not tracked or managed as part of the
release. Once Tiller verifies that the hook has reached its ready state, it
will leave the hook resource alone.
Practically speaking, this means that if you create resources in a hook, you
cannot rely upon `helm delete` to remove the resources. To destroy such
resources, you need to either write code to perform this operation in a `pre-delete`
or `post-delete` hook or add `"helm.sh/hook-delete-policy"` annotation to the hook template file.
## Writing a Hook
Hooks are just Kubernetes manifest files with special annotations in the
`metadata` section. Because they are template files, you can use all of
the normal template features, including reading `.Values` , `.Release` ,
and `.Template` .
For example, this template, stored in `templates/post-install-job.yaml` ,
declares a job to be run on `post-install` :
```yaml
apiVersion: batch/v1
kind: Job
metadata:
name: "{{.Release.Name}}"
labels:
heritage: {{.Release.Service | quote }}
release: {{.Release.Name | quote }}
chart: "{{.Chart.Name}}-{{.Chart.Version}}"
annotations:
# This is what defines this resource as a hook. Without this line, the
# job is considered part of the release.
"helm.sh/hook": post-install
"helm.sh/hook-weight": "-5"
"helm.sh/hook-delete-policy": hook-succeeded
spec:
template:
metadata:
name: "{{.Release.Name}}"
labels:
heritage: {{.Release.Service | quote }}
release: {{.Release.Name | quote }}
chart: "{{.Chart.Name}}-{{.Chart.Version}}"
spec:
restartPolicy: Never
containers:
- name: post-install-job
image: "alpine:3.3"
command: ["/bin/sleep","{{default "10" .Values.sleepyTime}}"]
```
What makes this template a hook is the annotation:
```
annotations:
"helm.sh/hook": post-install
```
One resource can implement multiple hooks:
```
annotations:
"helm.sh/hook": post-install,post-upgrade
```
Similarly, there is no limit to the number of different resources that
may implement a given hook. For example, one could declare both a secret
and a config map as a pre-install hook.
When subcharts declare hooks, those are also evaluated. There is no way
for a top-level chart to disable the hooks declared by subcharts.
It is possible to define a weight for a hook which will help build a
deterministic executing order. Weights are defined using the following annotation:
```
annotations:
"helm.sh/hook-weight": "5"
```
Hook weights can be positive or negative numbers but must be represented as
strings. When Tiller starts the execution cycle of hooks of a particular Kind it
will sort those hooks in ascending order.
It is also possible to define policies that determine when to delete corresponding hook resources. Hook deletion policies are defined using the following annotation:
```
annotations:
"helm.sh/hook-delete-policy": hook-succeeded
```
When using `"helm.sh/hook-delete-policy"` annoation, you can choose its value from `"hook-succeeded"` and `"hook-failed"` . The value `"hook-succeeded"` specifies Tiller should delete the hook after the hook is successfully excuted, while the value `"hook-failed"` specifies Tiller should delete the hook if the hook is failed during execuation.
