You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Open-IM-Server/config/templates/env.template

237 lines
7.9 KiB

This file contains ambiguous Unicode characters!

This file contains ambiguous Unicode characters that may be confused with others in your current locale. If your use case is intentional and legitimate, you can safely ignore this warning. Use the Escape button to highlight these characters.

# Copyright © 2024 OpenIM. All rights reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# -----------------------------------------------------------------------------
# General Configuration
# This section contains general configuration options for the entire environment.
# These options can be set via environment variables. If both environment variables
# and settings in this .env file exist, the environment variables take precedence.
# -----------------------------------------------------------------------------
# ==========================
# General Configuration
# ==========================
# These settings apply to the overall environment.
# Data storage directory for persistent data.
# Example: DATA_DIR=/path/to/data
DATA_DIR=/workspaces/open-im-server
# Docker image registry. Uncomment the preferred one.
# Options: ghcr.io/openimsdk, openim, registry.cn-hangzhou.aliyuncs.com/openimsdk
# IMAGE_REGISTRY="ghcr.io/openimsdk"
# IMAGE_REGISTRY="openim"
# IMAGE_REGISTRY="registry.cn-hangzhou.aliyuncs.com/openimsdk"
IMAGE_REGISTRY=ghcr.io/openimsdk
# ======================================
# ========= Network Configuration ======
# ======================================
# Subnet for the Docker network.
# Default: DOCKER_BRIDGE_SUBNET=172.28.0.0/16
DOCKER_BRIDGE_SUBNET=172.28.0.0/16
# Set and specify the IP addresses of some containers. Generally speaking,
# you do not need to modify these configurations to facilitate debugging
DOCKER_BRIDGE_GATEWAY=172.28.0.1
MONGO_NETWORK_ADDRESS=172.28.0.2
REDIS_NETWORK_ADDRESS=172.28.0.3
KAFKA_NETWORK_ADDRESS=172.28.0.4
ZOOKEEPER_NETWORK_ADDRESS=172.28.0.5
MINIO_NETWORK_ADDRESS=172.28.0.6
OPENIM_WEB_NETWORK_ADDRESS=172.28.0.7
OPENIM_SERVER_NETWORK_ADDRESS=172.28.0.8
OPENIM_CHAT_NETWORK_ADDRESS=172.28.0.9
PROMETHEUS_NETWORK_ADDRESS=172.28.0.10
GRAFANA_NETWORK_ADDRESS=172.28.0.11
NODE_EXPORTER_NETWORK_ADDRESS=172.28.0.12
OPENIM_ADMIN_FRONT_NETWORK_ADDRESS=172.28.0.13
ALERT_MANAGER_NETWORK_ADDRESS=172.28.0.14
# ==============================================================================
# Configuration Update Instructions
# ==============================================================================
# This header outlines the methods to update common variables in config.yaml and .env files.
# These instructions are vital for maintaining the OpenIM environment's configuration.
#
# METHOD 1: Regenerate All Configurations
# ----------------------------------------
# Use this method to regenerate all configurations.
# Steps:
# 1. Delete existing config files:
# - openim-server/config/config.yaml
# - openim-chat/config/config.yaml
# 2. Modify the .env file as required.
# 3. Run 'docker compose up -d'. This will regenerate:
# - config/config.yaml
#
# METHOD 2: Modify Individual Configuration Files
# -----------------------------------------------
# Use this method to update specific configuration files.
# Steps:
# 1. Modify the .env file as necessary.
# 2. Update the corresponding entries in:
# - config/config.yaml
# 3. Restart the services with 'docker compose up -d'.
# 4. Special Note: If you modify OPENIM_IP, API_OPENIM_PORT, or MINIO_PORT in .env,
# ensure to update the corresponding services and configurations accordingly.
#
# It is essential to follow these methods to ensure consistent and correct application behavior.
# ==============================================================================
# Local IP address of the service. Modify if necessary.
# Example: OPENIM_IP=172.28.0.1
OPENIM_IP=172.28.0.1
# ----- ZooKeeper Configuration -----
# Port for ZooKeeper service.
# Default: ZOOKEEPER_PORT=12181
ZOOKEEPER_PORT=12181
# MongoDB service port configuration.
# Default: MONGO_PORT=37017
# MONGO_PORT=37017
# Password for MongoDB admin user. Used for service authentication.
# Default: MONGO_PASSWORD=openIM123
MONGO_PASSWORD=openIM123
# Username for a regular OpenIM user in MongoDB.
# Default: MONGO_OPENIM_USERNAME=openIM
MONGO_OPENIM_USERNAME=openIM
# Password for a regular OpenIM user in MongoDB.
# Default: MONGO_OPENIM_PASSWORD=openIM123456
MONGO_OPENIM_PASSWORD=openIM123
# Specifies the database name to be used within MongoDB.
# Default: MONGO_DATABASE=openim_v3
MONGO_DATABASE=openim_v3
# ----- Redis Configuration -----
# Port on which Redis in-memory data structure store is running.
# Default: REDIS_PORT=16379
REDIS_PORT=16379
# Password to authenticate with the Redis service.
# Default: REDIS_PASSWORD=openIM123
REDIS_PASSWORD=openIM123
# Kakfa username to authenticate with the Kafka service.
# KAFKA_USERNAME=''
# Port on which Kafka distributed streaming platform is running.
# Default: KAFKA_PORT=19092
KAFKA_PORT=19094
# Topic in Kafka for storing the latest messages in Redis.
# Default: KAFKA_LATESTMSG_REDIS_TOPIC=latestMsgToRedis
KAFKA_LATESTMSG_REDIS_TOPIC=latestMsgToRedis
# MINIO_PORT
# ----------
# MINIO_PORT sets the port for the MinIO object storage service.
# Upon changing this port, the MinIO endpoint URLs in the file must be updated
# to reflect this change. The endpoints include both the 'endpoint' and 'signEndpoint'
# under the MinIO configuration.
#
# Default: MINIO_PORT=10005
MINIO_PORT=10005
# Access key to authenticate with the MinIO service.
# Default: MINIO_ACCESS_KEY=root
# MINIO_ACCESS_KEY=root
# Secret key corresponding to the access key for MinIO authentication.
# Default: MINIO_SECRET_KEY=openIM123
MINIO_SECRET_KEY=openIM123
# ----- Prometheus Configuration -----
# Port on which Prometheus service is running.
# Default: PROMETHEUS_PORT=19090
PROMETHEUS_PORT=19090
# ----- Grafana Configuration -----
# Port on which Grafana service is running.
# Default: GRAFANA_PORT=13000
GRAFANA_PORT=13000
# ======================================
# ============ OpenIM Web ===============
# ======================================
# Port on which OpenIM web service is running.
# Default: OPENIM_WEB_PORT=11001
OPENIM_WEB_PORT=11001
# ======================================
# ========= OpenIM Server ==============
# ======================================
# Port for the OpenIM WebSockets.
# Default: OPENIM_WS_PORT=10001
OPENIM_WS_PORT=10001
# API_OPENIM_PORT
# ---------------
# This variable defines the port on which the OpenIM API service will listen.
# When changing this port, it's essential to update the apiURL in the config.yaml file
# to ensure the API service is accessible at the new port.
#
# Default: API_OPENIM_PORT=10002
API_OPENIM_PORT=10002
# ======================================
# ========== OpenIM Chat ===============
# ======================================
# Branch name for OpenIM chat.
# Default: CHAT_IMAGE_VERSION=main
CHAT_IMAGE_VERSION=main
# Port for the OpenIM chat API.
# Default: OPENIM_CHAT_API_PORT=10008
OPENIM_CHAT_API_PORT=10008
# Port for the OpenIM admin API.
# Default: OPENIM_ADMIN_API_PORT=10009
OPENIM_ADMIN_API_PORT=10009
# ======================================
# ========== OpenIM Admin ==============
# ======================================
# Branch name for OpenIM server.
# Default: SERVER_IMAGE_VERSION=main
SERVER_IMAGE_VERSION=main
# Port for the node exporter.
# Default: NODE_EXPORTER_PORT=19100
NODE_EXPORTER_PORT=19100
# Port for the prometheus.
# Default: PROMETHEUS_PORT=19090
PROMETHEUS_PORT=19090
# Port for the grafana.
# Default: GRAFANA_PORT=13000
GRAFANA_PORT=13000
# Port for the admin front.
# Default: OPENIM_ADMIN_FRONT_PORT=11002
OPENIM_ADMIN_FRONT_PORT=11002
# Port for the alertmanager.
# Default: ALERT_MANAGER_PORT=19093
ALERT_MANAGER_PORT=19093