diff --git a/build/images/Dockerfile b/build/images/Dockerfile
index 51fe94e1c..020d50786 100644
--- a/build/images/Dockerfile
+++ b/build/images/Dockerfile
@@ -1,24 +1,24 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
+# # Copyright © 2023 OpenIM. All rights reserved.
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# #     http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
 
-FROM BASE_IMAGE
+# FROM BASE_IMAGE
 
-WORKDIR ${SERVER_WORKDIR}
+# WORKDIR ${SERVER_WORKDIR}
 
-# Set HTTP proxy
-ARG BINARY_NAME
+# # Set HTTP proxy
+# ARG BINARY_NAME
 
-COPY BINARY_NAME ./bin/BINARY_NAME
+# COPY BINARY_NAME ./bin/BINARY_NAME
 
-ENTRYPOINT ["./bin/BINARY_NAME"]
\ No newline at end of file
+# ENTRYPOINT ["./bin/BINARY_NAME"]
\ No newline at end of file
diff --git a/build/images/openim-api/Dockerfile b/build/images/openim-api/Dockerfile
index 662223956..cd8cb509d 100644
--- a/build/images/openim-api/Dockerfile
+++ b/build/images/openim-api/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-api
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-api
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-api /usr/bin/openim-api
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-api: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-api ./bin/openim-api
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-api"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-cmdutils/Dockerfile b/build/images/openim-cmdutils/Dockerfile
index 34bcd41f5..e8589439a 100644
--- a/build/images/openim-cmdutils/Dockerfile
+++ b/build/images/openim-cmdutils/Dockerfile
@@ -1,44 +1,44 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
+# # Copyright © 2023 OpenIM. All rights reserved.
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# #     http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
 
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
+# # OpenIM base image: https://github.com/openim-sigs/openim-base-image
 
-# Set go mod installation source and proxy
+# # Set go mod installation source and proxy
 
-FROM golang:1.20 AS builder
+# FROM golang:1.20 AS builder
 
-ARG GO111MODULE=on
+# ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# WORKDIR /openim/openim-server
 
-ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+# ENV GO111MODULE=$GO111MODULE
+# ENV GOPROXY=$GOPROXY
 
-COPY go.mod go.sum ./
-RUN go mod download
+# COPY go.mod go.sum ./
+# RUN go mod download
 
-COPY . .
+# COPY . .
 
-RUN make build BINS=openim-cmdutils
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-cmdutils /usr/bin/openim-cmdutils
+# RUN make build BINS=openim-cmdutils
+# RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-cmdutils /usr/bin/openim-cmdutils
 
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+# WORKDIR /openim/openim-server
 
-COPY --from=builder /usr/bin/openim-cmdutils ./bin/openim-cmdutils
+# COPY --from=builder /usr/bin/openim-cmdutils ./bin/openim-cmdutils
 
-ENTRYPOINT ["./bin/openim-cmdutils"]
+# ENTRYPOINT ["./bin/openim-cmdutils"]
 
-CMD ["--help"]
+# CMD ["--help"]
diff --git a/build/images/openim-crontask/Dockerfile b/build/images/openim-crontask/Dockerfile
index 90a562926..97e68a825 100644
--- a/build/images/openim-crontask/Dockerfile
+++ b/build/images/openim-crontask/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-crontask
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-crontask
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-crontask /usr/bin/openim-crontask
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-crontask: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-crontask ./bin/openim-crontask
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-crontask"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-msggateway/Dockerfile b/build/images/openim-msggateway/Dockerfile
index d3a8694ed..31c26e7d4 100644
--- a/build/images/openim-msggateway/Dockerfile
+++ b/build/images/openim-msggateway/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-msggateway
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-msggateway
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-msggateway /usr/bin/openim-msggateway
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-msggateway: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-msggateway ./bin/openim-msggateway
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-msggateway"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-msgtransfer/Dockerfile b/build/images/openim-msgtransfer/Dockerfile
index f94978648..602037fa1 100644
--- a/build/images/openim-msgtransfer/Dockerfile
+++ b/build/images/openim-msgtransfer/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-msgtransfer
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-msgtransfer
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-msgtransfer /usr/bin/openim-msgtransfer
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-msgtransfer: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-msgtransfer ./bin/openim-msgtransfer
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-msgtransfer"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-push/Dockerfile b/build/images/openim-push/Dockerfile
index faebbe9c0..b5973b4a5 100644
--- a/build/images/openim-push/Dockerfile
+++ b/build/images/openim-push/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-push
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-push
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-push /usr/bin/openim-push
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-push: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-push ./bin/openim-push
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-push"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-rpc-auth/Dockerfile b/build/images/openim-rpc-auth/Dockerfile
index 1e905d4b2..e6f16553e 100644
--- a/build/images/openim-rpc-auth/Dockerfile
+++ b/build/images/openim-rpc-auth/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-rpc-auth
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-rpc-auth
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-auth /usr/bin/openim-rpc-auth
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-rpc-auth: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-rpc-auth ./bin/openim-rpc-auth
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-rpc-auth"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-rpc-conversation/Dockerfile b/build/images/openim-rpc-conversation/Dockerfile
index 5a69aa89f..e90ebb9c2 100644
--- a/build/images/openim-rpc-conversation/Dockerfile
+++ b/build/images/openim-rpc-conversation/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-rpc-conversation
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-rpc-conversation
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-conversation /usr/bin/openim-rpc-conversation
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-rpc-conversation: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-rpc-conversation ./bin/openim-rpc-conversation
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-rpc-conversation"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-rpc-friend/Dockerfile b/build/images/openim-rpc-friend/Dockerfile
index fad21a880..d48130091 100644
--- a/build/images/openim-rpc-friend/Dockerfile
+++ b/build/images/openim-rpc-friend/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-rpc-friend
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-rpc-friend
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-friend /usr/bin/openim-rpc-friend
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-rpc-friend: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-rpc-friend ./bin/openim-rpc-friend
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-rpc-friend"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-rpc-group/Dockerfile b/build/images/openim-rpc-group/Dockerfile
index d7dede6b9..6d627c1e6 100644
--- a/build/images/openim-rpc-group/Dockerfile
+++ b/build/images/openim-rpc-group/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-rpc-group
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-rpc-group
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-group /usr/bin/openim-rpc-group
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-rpc-group: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-rpc-group ./bin/openim-rpc-group
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-rpc-group"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-rpc-msg/Dockerfile b/build/images/openim-rpc-msg/Dockerfile
index 71ad85f37..fc372dc1e 100644
--- a/build/images/openim-rpc-msg/Dockerfile
+++ b/build/images/openim-rpc-msg/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-rpc-msg
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-rpc-msg
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-msg /usr/bin/openim-rpc-msg
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-rpc-msg: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-rpc-msg ./bin/openim-rpc-msg
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-rpc-msg"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-rpc-third/Dockerfile b/build/images/openim-rpc-third/Dockerfile
index 3560ad0d7..bcfb37f83 100644
--- a/build/images/openim-rpc-third/Dockerfile
+++ b/build/images/openim-rpc-third/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-rpc-third
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-rpc-third
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-third /usr/bin/openim-rpc-third
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-rpc-third: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-rpc-third ./bin/openim-rpc-third
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-rpc-third"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-rpc-user/Dockerfile b/build/images/openim-rpc-user/Dockerfile
index a9891ece8..c02e538fc 100644
--- a/build/images/openim-rpc-user/Dockerfile
+++ b/build/images/openim-rpc-user/Dockerfile
@@ -1,44 +1,60 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
+
+ENV BINS=openim-rpc-user
+
+# Optionally build your application if needed
+RUN mage build ${BINS} check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-RUN make build BINS=openim-rpc-user
 
-RUN cp /openim/openim-server/_output/bin/platforms/$(go env GOOS)/$(go env GOARCH)/openim-rpc-user /usr/bin/openim-rpc-user
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+RUN echo -e "serviceBinaries:\n  openim-rpc-user: 1 \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-COPY --from=builder /usr/bin/openim-rpc-user ./bin/openim-rpc-user
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["./bin/openim-rpc-user"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]
diff --git a/build/images/openim-tools/component/Dockerfile b/build/images/openim-tools/component/Dockerfile
index 6bdfa6942..6669f6e12 100644
--- a/build/images/openim-tools/component/Dockerfile
+++ b/build/images/openim-tools/component/Dockerfile
@@ -1,48 +1,111 @@
-# Copyright © 2023 OpenIM. All rights reserved.
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-# OpenIM base image: https://github.com/openim-sigs/openim-base-image
-
-# Set go mod installation source and proxy
-
-FROM golang:1.20 AS builder
+# # Copyright © 2023 OpenIM. All rights reserved.
+# #
+# # Licensed under the Apache License, Version 2.0 (the "License");
+# # you may not use this file except in compliance with the License.
+# # You may obtain a copy of the License at
+# #
+# #     http://www.apache.org/licenses/LICENSE-2.0
+# #
+# # Unless required by applicable law or agreed to in writing, software
+# # distributed under the License is distributed on an "AS IS" BASIS,
+# # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# # See the License for the specific language governing permissions and
+# # limitations under the License.
+
+# # OpenIM base image: https://github.com/openim-sigs/openim-base-image
+
+# # Set go mod installation source and proxy
+
+# FROM golang:1.20 AS builder
+
+# ARG GO111MODULE=on
+
+# WORKDIR /openim/openim-server
+
+# ENV GO111MODULE=$GO111MODULE
+# ENV GOPROXY=$GOPROXY
+
+# COPY go.mod go.sum ./
+# RUN go mod download
+
+# COPY . .
+
+# RUN make clean
+# RUN make build BINS=component
+
+# # FROM ghcr.io/openim-sigs/openim-bash-image:latest
+# FROM ghcr.io/openim-sigs/openim-bash-image:latest
+
+# WORKDIR /openim/openim-server
+
+# COPY --from=builder /openim/openim-server/_output/bin/tools /openim/openim-server/_output/bin/tools/
+# COPY --from=builder /openim/openim-server/config /openim/openim-server/config
+
+# ENV OPENIM_SERVER_CONFIG_NAME=/openim/openim-server/config
+
+# RUN mv ${OPENIM_SERVER_BINDIR}/platforms/$(get_os)/$(get_arch)/component /usr/bin/component
+
+# ENTRYPOINT ["bash", "-c", "component -c $OPENIM_SERVER_CONFIG_NAME"]
+
+
+# Use Go 1.22 Alpine as the base image for building the application
+FROM golang:1.22-alpine AS builder
 
 ARG GO111MODULE=on
 
-WORKDIR /openim/openim-server
+# Define the base directory for the application as an environment variable
+ENV SERVER_DIR=/openim-server
 
+# Set the working directory inside the container based on the environment variable
+WORKDIR $SERVER_DIR
+
+# Set the Go proxy to improve dependency resolution speed
 ENV GO111MODULE=$GO111MODULE
-ENV GOPROXY=$GOPROXY
+ENV GOPROXY=https://goproxy.io,direct
+
+# Copy all files from the current directory into the container
+COPY . .
 
-COPY go.mod go.sum ./
 RUN go mod download
 
-COPY . .
+# Install Mage to use for building the application
+RUN go install github.com/magefile/mage@v1.15.0
 
-RUN make clean
-RUN make build BINS=component
+# ENV BINS=openim-rpc-user
+
+# Optionally build your application if needed
+# RUN mage build ${BINS} check-free-memory seq || true
+RUN mage build check-free-memory seq || true
+
+# Using Alpine Linux with Go environment for the final image
+FROM golang:1.22-alpine
+
+# Install necessary packages, such as bash
+RUN apk add bash
+
+# Set the environment and work directory
+ENV SERVER_DIR=/openim-server
+WORKDIR $SERVER_DIR
 
-# FROM ghcr.io/openim-sigs/openim-bash-image:latest
-FROM ghcr.io/openim-sigs/openim-bash-image:latest
 
-WORKDIR /openim/openim-server
+# Copy the compiled binaries and mage from the builder image to the final image
+COPY --from=builder $SERVER_DIR/_output $SERVER_DIR/_output
+COPY --from=builder $SERVER_DIR/config $SERVER_DIR/config
+COPY --from=builder /go/bin/mage /usr/local/bin/mage
+COPY --from=builder $SERVER_DIR/magefile_windows.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile_unix.go $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/magefile.go $SERVER_DIR/
+# COPY --from=builder $SERVER_DIR/start-config.yml $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.mod $SERVER_DIR/
+COPY --from=builder $SERVER_DIR/go.sum $SERVER_DIR/
 
-COPY --from=builder /openim/openim-server/_output/bin/tools /openim/openim-server/_output/bin/tools/
-COPY --from=builder /openim/openim-server/config /openim/openim-server/config
 
-ENV OPENIM_SERVER_CONFIG_NAME=/openim/openim-server/config
+RUN echo -e "serviceBinaries:\n  \n" \
+    > $SERVER_DIR/start-config.yml && \
+    echo -e "toolBinaries:\n  - check-free-memory\n  - seq\n" >> $SERVER_DIR/start-config.yml && \
+    echo "maxFileDescriptors: 10000" >> $SERVER_DIR/start-config.yml
 
-RUN mv ${OPENIM_SERVER_BINDIR}/platforms/$(get_os)/$(get_arch)/component /usr/bin/component
+RUN go get github.com/mo3et/openim-gomake@v0.0.74
 
-ENTRYPOINT ["bash", "-c", "component -c $OPENIM_SERVER_CONFIG_NAME"]
+# Set the command to run when the container starts
+ENTRYPOINT ["sh", "-c", "mage start && tail -f /dev/null"]