@ -69,7 +69,7 @@ To program the Pi using the Grove sensors and actuators, you will need to instal
> 💁 You are free to use any Python IDE or editor for these lessons if you have a preferred tool, but the lessons will give instructions based off using VS Code.
1. Install Pylance. This is an extension for VS Code that provides Python language support. Refer to the [Pylance extension documentation](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) for instructions on installing this extension in VS Code.
1. Install Pylance. This is an extension for VS Code that provides Python language support. Refer to the [Pylance extension documentation](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) for instructions on installing this extension in VS Code.
### Remote access to code the Pi
@ -191,7 +191,7 @@ Install the required software and connect remotely to your Pi.
1. Following the same instructions, connect VS Code to the Pi
1. Once connected, follow the [managing extensions](https://code.visualstudio.com/docs/remote/ssh#_managing-extensions?WT.mc_id=academic-17441-jabenn) instructions to install the [Pylance extension](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) remotely onto the Pi
1. Once connected, follow the [managing extensions](https://code.visualstudio.com/docs/remote/ssh#_managing-extensions?WT.mc_id=academic-17441-jabenn) instructions to install the [Pylance extension](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) remotely onto the Pi
作业将用 [Visual Studio Code](https://code.visualstudio.com/?WT.mc_id=academic-17441-jabenn)。
如果你使用的是Raspberry Pi，则可以使用完整桌面版 Raspberry Pi OS 运行你的树莓派，并使用 [VS Code 的 Raspberry Pi OS版](https://code.visualstudio.com/docs/setup/raspberry-pi?WT.mc_id=academic-17441-jabenn)直接在你的树莓派上写程序。或者把它当成一个无头设备，从你的电脑用 VS Code 的 [Remote SSH插件](https://code.visualstudio.com/docs/remote/ssh?WT.mc_id=academic-17441-jabenn)写程序；这个插件让你连接到树莓派，编辑，调试和运行代码，就像你直接在树莓派上写程序一样。
如果你使用的是Raspberry Pi，则可以使用完整桌面版 Raspberry Pi OS 运行你的树莓派，并使用 [VS Code 的 Raspberry Pi OS版](https://code.visualstudio.com/docs/setup/raspberry-pi?WT.mc_id=academic-17441-jabenn)直接在你的树莓派上写程序。或者把它当成一个无头设备，从你的电脑用 VS Code 的 [Remote SSH插件](https://code.visualstudio.com/docs/remote/ssh?WT.mc_id=academic-17441-jabenn)写程序；这个插件让你连接到树莓派，编辑，调试和运行代码，就像你直接在树莓派上写程序一样。
@ -66,7 +66,7 @@ Grove বেস হ্যাটটি রাস্পবেরি পাই এ
> 💁 পছন্দানুসারে যেকোন পাইথন আইডিই বা এডিটর ব্যবহার করলেই হয়, কিন্তু আমরা এখানে সম্পূর্ণ টিউটোরিয়াল সাজিয়েছি ভিএস কোডের উপর ভিত্তি করে।
6. Pylance ইন্সটল করতে হবে। পাইথনে কোড করার জন্য, এটি ভিএস কোডের একটি এক্সটেনশন। [Pylance extension documentation](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) থেকে এটি ইন্সটল করার সকল নির্দেশনা পাওয়া যাবে।
6. Pylance ইন্সটল করতে হবে। পাইথনে কোড করার জন্য, এটি ভিএস কোডের একটি এক্সটেনশন। [Pylance extension documentation](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) থেকে এটি ইন্সটল করার সকল নির্দেশনা পাওয়া যাবে।
### পাই তে রিমোট একসেস
@ -184,7 +184,7 @@ Grove বেস হ্যাটটি রাস্পবেরি পাই এ
1. একই গাইড ফলো করে রাস্পবেরি পাই কে ভিএস কোডের সাথে সংযুক্ত করতে হবে।
1. কানেক্ট হয়ে যাওয়ার পরে [managing extensions](https://code.visualstudio.com/docs/remote/ssh#_managing-extensions?WT.mc_id=academic-17441-jabenn) অনুসারে [Pylance extension](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) রিমোট মাধ্যমে পাই তে ইন্সটল করতে হবে।
1. কানেক্ট হয়ে যাওয়ার পরে [managing extensions](https://code.visualstudio.com/docs/remote/ssh#_managing-extensions?WT.mc_id=academic-17441-jabenn) অনুসারে [Pylance extension](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) রিমোট মাধ্যমে পাই তে ইন্সটল করতে হবে।
>💁 यदि आपके पास कोई पसंदीदा टूल है, तो आप इन पाठों के लिए किसी भी पायथन आईडीई या संपादक का उपयोग करने के लिए स्वतंत्र हैं, लेकिन पाठ वीएस कोड के उपयोग के आधार पर निर्देश देंगे।
1. पाइलेंस स्थापित करें। यह वीएस कोड के लिए एक एक्सटेंशन है जो पायथन भाषा समर्थन प्रदान करता है। वीएस कोड में इस एक्सटेंशन को स्थापित करने के निर्देशों के लिए [पायलेंस एक्सटेंशन डॉक्यूमेंटेशन](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) देखें।
1. पाइलेंस स्थापित करें। यह वीएस कोड के लिए एक एक्सटेंशन है जो पायथन भाषा समर्थन प्रदान करता है। वीएस कोड में इस एक्सटेंशन को स्थापित करने के निर्देशों के लिए [पायलेंस एक्सटेंशन डॉक्यूमेंटेशन](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) देखें।
### पाई को कोड करने के लिए रिमोट एक्सेस
@ -189,7 +189,7 @@
1. समान निर्देशों का पालन करते हुए, VS कोड को पाइ से कनेक्ट करें
1. कनेक्ट होने के बाद, [पाइलेंस एक्सटेंशन](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) इंस्टॉल करने के लिए [मैनेजिंग एक्सटेंशन](https://code.visualstudio.com/docs/remote/ssh#_managing-extensions?WT.mc_id=academic-17441-jabenn) निर्देशों का पालन करें।
1. कनेक्ट होने के बाद, [पाइलेंस एक्सटेंशन](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) इंस्टॉल करने के लिए [मैनेजिंग एक्सटेंशन](https://code.visualstudio.com/docs/remote/ssh?WT.mc_id=academic-17441-jabenn#_managing-extensions) निर्देशों का पालन करें।
@ -67,7 +67,7 @@ Para programar o Pi usando os sensores e atuadores Grove, você precisará insta
> 💁 Você está livre para usar qualquer IDE de Python ou editor para essas lições se tiver uma ferramenta preferida, mas as lições darão instruções baseadas no uso do VS Code.
1. Instale o Pylance. Esta é uma extensão para VS Code que fornece suporte à linguagem Python. Consulte a [documentação da extensão Pylance](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) para obter instruções sobre como instalar esta extensão no VS Code.
1. Instale o Pylance. Esta é uma extensão para VS Code que fornece suporte à linguagem Python. Consulte a [documentação da extensão Pylance](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) para obter instruções sobre como instalar esta extensão no VS Code.
### Acesso remoto para codificar o Pi
@ -187,7 +187,7 @@ Instale o software necessário e conecte-se remotamente ao seu Pi.
1. Seguindo as mesmas instruções, conecte o VS Code ao Pi
1. Depois de conectado, siga as instruções em [gerenciando extensões](https://code.visualstudio.com/docs/remote/ssh#_managing-extensions?WT.mc_id=academic-17441-jabenn) para instalar a [extensão Pylance](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) remotamente no Pi
1. Depois de conectado, siga as instruções em [gerenciando extensões](https://code.visualstudio.com/docs/remote/ssh#_managing-extensions?WT.mc_id=academic-17441-jabenn) para instalar a [extensão Pylance](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) remotamente no Pi
> 💁 Você está livre para usar qualquer IDE ou editor de código Python para essas lições se tiver uma ferramenta preferida, mas as lições darão instruções baseadas no uso do VS Code.
1. Instale a extensão Pylance do VS Code. Esta é uma extensão para VS Code que fornece suporte à linguagem Python. Consulte a [documentação da extensão Pylance](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) para obter instruções sobre como instalar esta extensão no VS Code.
1. Instale a extensão Pylance do VS Code. Esta é uma extensão para VS Code que fornece suporte à linguagem Python. Consulte a [documentação da extensão Pylance](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) para obter instruções sobre como instalar esta extensão no VS Code.
As instruções para instalar e configurar o aplicativo CounterFit serão fornecidas no momento relevante nas instruções de atribuição, uma vez que é instalado por projeto.
> 💁 如果你的终端在 macOS 返回`command not found`，那就代表 VS Code 还未被加进你的 PATH。为了把 VS Code 加进你的 PATH，你可以按照 [Launching from the command line section of the VS Code 文档](https://code.visualstudio.com/docs/setup/mac?WT.mc_id=academic-17441-jabenn#_launching-from-the-command-line) 的指示，然后运行命令。在 Windows 和 Linux，VS Code 默认被加进你的 PATH。
> 💁 如果你的终端在 macOS 返回`command not found`，那就代表 VS Code 还未被加进你的 PATH。为了把 VS Code 加进你的 PATH，你可以按照 [Launching from the command line section of the VS Code 文档](https://code.visualstudio.com/docs/setup/mac?WT.mc_id=academic-17441-jabenn#_launching-from-the-command-line) 的指示，然后运行命令。在 Windows 和 Linux，VS Code 默认被加进你的 PATH。
3. 当 VS Code 被启动，它会激活 Python 虚拟环境。被选择的虚拟环境将在底部状态栏出现：
4. 如果VS Code 被启动时VS Code 终端已经正在运行，虚拟环境不会被激活。这时，最容易做的是用 **Kill the active terminal instance** 的按钮：
4. 如果VS Code 被启动时VS Code 终端已经正在运行，虚拟环境不会被激活。这时，最容易做的是用 **Kill the active terminal instance** 的按钮：
@ -17,7 +17,7 @@ Wio Terminal ব্যবহার করার জন্য, আমাদের
> 💁 আরডুইনো ডেভলপমেন্ট এর জন্য আর একটি ভালো আই.ডি.ই হলো [Arduino IDE](https://www.arduino.cc/en/software). এই IDE টির সাথে কাজ করার পূর্ব অভিজ্ঞতা থাকলে ভি এস কোড ও platformIO এর পরিবর্তে একেও ব্যাবহার করা যেতে পারে। তবে, এখানে আমরা ভি এস কোডের উপর ভিত্তি করেই কাজ করবো।
২. এরপর ভি এস কোড platformIO এক্সটেনশনটি ইনস্টল করতে হবে। এই এক্সটেনশনটি ভি এস কোডে ইনস্টল করতে [PlatformIO extension documentation](https://marketplace.visualstudio.com/items?itemName=platformio.platformio-ide&WT.mc_id=academic-17441-jabenn) এ দেওয়া দিকির্দেশনাগুলো পড়ে দেখতে পারেন। এটি একটি ভি এস কোড এক্সটেনশন যা সি/সি++ ভাষায় মাইক্রোকন্ট্রোলার প্রোগ্রামিংকে সাপোর্ট করে। এই এক্সটেনশনটি মাইক্রোসফট সি/সি++ এর উপর নির্ভর করে , সি অথবা সি++ ভাষা নিয়ে কাজ করার জন্য। উল্লেখ্য, এই সি/সি++ এক্সটেনশন সয়ংক্রিয়ভাবে ইনস্টল হয়ে যায় যখন কেউ platformIO ইনস্টল করে।
২. এরপর ভি এস কোড platformIO এক্সটেনশনটি ইনস্টল করতে হবে। এই এক্সটেনশনটি ভি এস কোডে ইনস্টল করতে [PlatformIO extension documentation](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=platformio.platformio-ide) এ দেওয়া দিকির্দেশনাগুলো পড়ে দেখতে পারেন। এটি একটি ভি এস কোড এক্সটেনশন যা সি/সি++ ভাষায় মাইক্রোকন্ট্রোলার প্রোগ্রামিংকে সাপোর্ট করে। এই এক্সটেনশনটি মাইক্রোসফট সি/সি++ এর উপর নির্ভর করে , সি অথবা সি++ ভাষা নিয়ে কাজ করার জন্য। উল্লেখ্য, এই সি/সি++ এক্সটেনশন সয়ংক্রিয়ভাবে ইনস্টল হয়ে যায় যখন কেউ platformIO ইনস্টল করে।
৩. এখন, আমরা আমাদের Wio Terminal কে কম্পিউটার এর সাথে সংযুক্ত করব। এটির নিচের দিকে একটি ইউএসবি-সি পোর্ট আছে, সেটিকে আমরা আমাদের কম্পিউটার এর ইউএসবি পোর্ট এর সাথে সংযোগ দিব। উইও টার্মিনালে ইউএসবি-সি ও ইউএসবি-এ ক্যাবল থাকে। যদি আমাদের কম্পিউটারে শুধু ইউএসবি-সি পোর্ট থেকে, তাহলে আমাদের হয় ইউএসবি-সি ক্যাবল অথবা ইউএসবি-এ ক্যাবলের প্রয়োজন হবে ইউএসবি-সি অ্যাডাপ্টার এ সংযোগ দেওয়ার জন্য।
@ -16,7 +16,7 @@ Instale o software necessário e atualize o firmware.
> 💁 Outro IDE popular para o desenvolvimento do Arduino é o [Arduino IDE](https://www.arduino.cc/en/software). Se você já está familiarizado com esta ferramenta, você pode usá-la em vez do VS Code e PlatformIO, mas as lições darão instruções baseadas no uso do VS Code.
1. Instale a extensão PlatformIO do VS Code. Esta é uma extensão do VS Code que oferece suporte à programação de microcontroladores em C/C++. Consulte a [documentação da extensão PlatformIO](https://marketplace.visualstudio.com/items?itemName=platformio.platformio-ide&WT.mc_id=academic-17441-jabenn) para obter instruções sobre como instalar esta extensão no VS Code. Esta extensão depende da extensão Microsoft C/C++ para funcionar com código C e C ++, e a extensão C/C++ é instalada automaticamente quando você instala a extensão PlatformIO.
1. Instale a extensão PlatformIO do VS Code. Esta é uma extensão do VS Code que oferece suporte à programação de microcontroladores em C/C++. Consulte a [documentação da extensão PlatformIO](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=platformio.platformio-ide) para obter instruções sobre como instalar esta extensão no VS Code. Esta extensão depende da extensão Microsoft C/C++ para funcionar com código C e C ++, e a extensão C/C++ é instalada automaticamente quando você instala a extensão PlatformIO.
1. Conecte o Wio Terminal ao computador. O Wio Terminal possui uma porta USB-C na parte inferior e ela precisa ser conectada a uma porta USB no seu computador. O Wio Terminal vem com um cabo USB-C para USB-A, mas se o seu computador tiver apenas portas USB-C, você precisará de um cabo USB-C ou de um adaptador USB-A para USB-C.
> 💁 另外一个为 Arduino 开发的 IDE 是 [Arduino IDE](https://www.arduino.cc/en/software)。如果你已经对这个工具熟悉，那你可以把它用来代替 VS Code 和 PlatformIO，但这个课程的指示将基于 VS Code。
1. 安装 VS Code 的 PlatformIO 扩展。这是支持用 C 或 C++ 来为微控制器写编码的 VS Code 扩展。在 [PlatformIO 扩展文档](https://marketplace.visualstudio.com/items?itemName=platformio.platformio-ide&WT.mc_id=academic-17441-jabenn) 找一下在 VS Code 安装扩展的指示。这个扩展依赖着Microsoft C/C++ 扩展来与 C 和 C++ 代码工作，而这个C/C++ 扩展在默认情况下会被安装当你安装 PlatformIO。
1. 安装 VS Code 的 PlatformIO 扩展。这是支持用 C 或 C++ 来为微控制器写编码的 VS Code 扩展。在 [PlatformIO 扩展文档](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=platformio.platformio-ide) 找一下在 VS Code 安装扩展的指示。这个扩展依赖着Microsoft C/C++ 扩展来与 C 和 C++ 代码工作，而这个C/C++ 扩展在默认情况下会被安装当你安装 PlatformIO。
> 💁 You are free to use any Python IDE or editor for these lessons if you have a preferred tool, but the lessons will give instructions based off using VS Code.
1. Install the VS Code Pylance extension. This is an extension for VS Code that provides Python language support. Refer to the [Pylance extension documentation](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) for instructions on installing this extension in VS Code.
1. Install the VS Code Pylance extension. This is an extension for VS Code that provides Python language support. Refer to the [Pylance extension documentation](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) for instructions on installing this extension in VS Code.
The instructions to install and configure the CounterFit app will be given at the relevant time in the assignment instructions as it is installed on a per-project basis.
@ -16,7 +16,7 @@ Install the required software and update the firmware.
> 💁 Another popular IDE for Arduino development is the [Arduino IDE](https://www.arduino.cc/en/software). If you are already familiar with this tool, then you can use it instead of VS Code and PlatformIO, but the lessons will give instructions based off using VS Code.
1. Install the VS Code PlatformIO extension. This is an extension for VS Code that supports programming microcontrollers in C/C++. Refer to the [PlatformIO extension documentation](https://marketplace.visualstudio.com/items?itemName=platformio.platformio-ide&WT.mc_id=academic-17441-jabenn) for instructions on installing this extension in VS Code. This extension depends on the Microsoft C/C++ extension to work with C and C++ code, and the C/C++ extension is installed automatically when you install PlatformIO.
1. Install the VS Code PlatformIO extension. This is an extension for VS Code that supports programming microcontrollers in C/C++. Refer to the [PlatformIO extension documentation](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=platformio.platformio-ide) for instructions on installing this extension in VS Code. This extension depends on the Microsoft C/C++ extension to work with C and C++ code, and the C/C++ extension is installed automatically when you install PlatformIO.
1. Connect your Wio Terminal to your computer. The Wio Terminal has a USB-C port on the bottom, and this needs to be connected to a USB port on your computer. The Wio Terminal comes with a USB-C to USB-A cable, but if your computer only has USB-C ports then you will either need a USB-C cable or a USB-A to USB-C adapter.
> 💁 You are free to use any Python IDE or editor for these lessons if you have a preferred tool, but the lessons will give instructions based off using VS Code.
1. Install the VS Code Pylance extension. This is an extension for VS Code that provides Python language support. Refer to the [Pylance extension documentation](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) for instructions on installing this extension in VS Code.
1. Install the VS Code Pylance extension. This is an extension for VS Code that provides Python language support. Refer to the [Pylance extension documentation](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) for instructions on installing this extension in VS Code.
@ -148,7 +148,7 @@ MQTT لديها وسيط واحد وعملاء متعددين. يتصل جميع
> 💁 لك مطلق الحرية في استخدام أي محرر Python IDE أو محرر لهذه الدروس إذا كان لديك أداة مفضلة ، ولكن الدروس ستعطي إرشادات تستند إلى استخدام VS Code.
1. قم بتثبيت امتداد VS Code Pylance. هذا امتداد لـ VS Code الذي يوفر دعم لغة Python. راجع <ahref="https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn">Pylance extension documentation</a> للحصول على إرشادات حول تثبيت هذا الامتداد في VS Code.
1. قم بتثبيت امتداد VS Code Pylance. هذا امتداد لـ VS Code الذي يوفر دعم لغة Python. راجع <ahref="https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance">Pylance extension documentation</a> للحصول على إرشادات حول تثبيت هذا الامتداد في VS Code.
> 💁 এই পাঠের নির্দেশনাগুলো VS Code এর উপর ভিত্তি করে লেখা হলেও এই পাঠের জন্য আমরা আমাদের সুবিধামত টুল অর্থাৎ পাইথনবেইজ়ড যেকেনো আইডি বা ইডিটর ব্যবহার করতে পারি।
1. VS Code এর Pylance এক্সটেনশনটি ইন্সটল করি। পাইথন লেঙ্গুয়েজের সাপোর্টের জন্য এটি VS Code এর একটি এক্সটেনশন। এটি এক্সটেনশনটি VS Code-এ কিভাবে ইন্সটল করতে হয় [Pylance extension documentation](https://marketplace.visualstudio.com/items?itemName=ms-python.vscode-pylance&WT.mc_id=academic-17441-jabenn) থেকে দেখে নেই।
1. VS Code এর Pylance এক্সটেনশনটি ইন্সটল করি। পাইথন লেঙ্গুয়েজের সাপোর্টের জন্য এটি VS Code এর একটি এক্সটেনশন। এটি এক্সটেনশনটি VS Code-এ কিভাবে ইন্সটল করতে হয় [Pylance extension documentation](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-python.vscode-pylance) থেকে দেখে নেই।
@ -74,7 +74,7 @@ The Azure Functions tooling is available as a CLI, known as the Azure Functions
1. Install the Azure Functions core tools by following the instructions on the [Azure Functions Core Tools documentation](https://docs.microsoft.com/azure/azure-functions/functions-run-local?WT.mc_id=academic-17441-jabenn)
1. Install the Azure Functions extension for VS Code. This extension provides support for creating, debugging and deploying Azure functions. Refer to the [Azure Functions extension documentation](https://marketplace.visualstudio.com/items?itemName=ms-azuretools.vscode-azurefunctions&WT.mc_id=academic-17441-jabenn) for instructions on installing this extension in VS Code.
1. Install the Azure Functions extension for VS Code. This extension provides support for creating, debugging and deploying Azure functions. Refer to the [Azure Functions extension documentation](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-azuretools.vscode-azurefunctions) for instructions on installing this extension in VS Code.
When you deploy your Azure Functions app to the cloud, it needs to use a small amount of cloud storage to store things like the application files and log files. When you run your Functions app locally, you still need to connect to cloud storage, but instead of using actual cloud storage, you can use a storage emulator called [Azurite](https://github.com/Azure/Azurite). This runs locally but acts like cloud storage.
@ -310,7 +310,7 @@ This will create a folder inside the `soil-moisture-trigger` folder called `iot-
> 💁 You can also have output bindings so that the output of a function is sent to another service. For example you could add an output binding to a database and return the IoT Hub event from the function, and it will automatically be inserted into the database.
✅ Do some research: Read up on bindings in the [Azure Functions triggers and bindings concepts documentation](https://docs.microsoft.com/azure/azure-functions/functions-triggers-bindings?tabs=python&WT.mc_id=academic-17441-jabenn).
✅ Do some research: Read up on bindings in the [Azure Functions triggers and bindings concepts documentation](https://docs.microsoft.com/azure/azure-functions/functions-triggers-bindings?WT.mc_id=academic-17441-jabenn&tabs=python).
The `bindings` section includes configuration for the binding. The values of interest are:
@ -74,7 +74,7 @@ Azure Functions tooling আমরা CLI এর মাধ্যমে ব্য
1. Azure Functions Core Tools ইনস্টল করার জন্য [Azure Functions Core Tools documentation](https://docs.microsoft.com/azure/azure-functions/functions-run-local?WT.mc_id=academic-17441-jabenn) নির্দেশাবলী অনুসরণ করি।
1. VS Code এ Azure Functions extension ইন্সটল করতে হবে। এই এক্সটেনশনে মাধ্যমে Azure functions তৈরী, ডিবাগ এবং ডেপ্লয় করা যাবে। প্রয়োজনীয় নির্দেশনা [Azure Functions extension documentation](https://marketplace.visualstudio.com/items?itemName=ms-azuretools.vscode-azurefunctions&WT.mc_id=academic-17441-jabenn) এ রয়েছে।
1. VS Code এ Azure Functions extension ইন্সটল করতে হবে। এই এক্সটেনশনে মাধ্যমে Azure functions তৈরী, ডিবাগ এবং ডেপ্লয় করা যাবে। প্রয়োজনীয় নির্দেশনা [Azure Functions extension documentation](https://marketplace.visualstudio.com/items?WT.mc_id=academic-17441-jabenn&itemName=ms-azuretools.vscode-azurefunctions) এ রয়েছে।
আমরা যখন ক্লাউডে অ্যাজুর ফাংশন অ্যাপ্লিকেশন শুরু করবো, তখন অ্যাপ্লিকেশন ফাইল এবং লগ ফাইলের মতো জিনিসগুলি সেভ রাখতে খুব অল্প পরিমাণে ক্লাউড স্টোরেজ ব্যবহার করা দরকার। যখন লোকালি আমরা ফাংশন অ্যাপ্লিকেশন চালাই তখন আমাদেরকে ক্লাউড স্টোরেজের সাথে সংযোগ স্থাপন করতে হবে, তবে প্রকৃত ক্লাউডের স্টোরেজ ব্যবহারের পরিবর্তে একটি স্টোরেজ এমুলেটর ব্যবহার করতে হবে যেমন [Azurite](https://github.com/Azure/Azurite)। এটি লোকাল ভাবে চলে, তবে ক্লাউড স্টোরেজের মতো কাজ করে।
@ -301,7 +301,7 @@ Azure Functions CLI দ্বারা নতুন Functions app তৈরী
> 💁 এছাড়াও আমরা আউটপুট বাইন্ডিং ব্যবহার করতে পারি যা কোন ফাংশনের আউটপুটকে আরেকটি ডিভাইসে প্রেরণ করতে পারে। যেমন, কোন ডেটাবেসের সাথে আউটপুট বাইন্ডিং যোগ করে ফাংশন দ্বারা আইওটি হাবের সাথে রিটার্ন করতে দিলে - সকল ডেটা স্বংক্রিয়ভাবেই সেই ডেটাবেস এ চলে আসবে।
✅ এবার কিছু গবেষণা করা যাক: বাইন্ডিংস নিয়ে [Azure Functions triggers and bindings concepts documentation](https://docs.microsoft.com/azure/azure-functions/functions-triggers-bindings?tabs=python&WT.mc_id=academic-17441-jabenn)পড়ে আরো জেনে নিই এই বিষয়ে ।
✅ এবার কিছু গবেষণা করা যাক: বাইন্ডিংস নিয়ে [Azure Functions triggers and bindings concepts documentation](https://docs.microsoft.com/azure/azure-functions/functions-triggers-bindings?WT.mc_id=academic-17441-jabenn&tabs=python)পড়ে আরো জেনে নিই এই বিষয়ে ।
`bindings` অংশে এর কনফিগারেশনগুলো রয়েছে। এর গুরুত্বপূর্ণ কিছু ভ্যালু হলো :
@ -88,11 +88,11 @@ Working with maps is an interesting exercise, and there are many to choose from
Azure Maps is "a collection of geospatial services and SDKs that use fresh mapping data to provide geographic context to web and mobile applications." Developers are provided with tools to create beautiful, interactive maps that can do things like provide recommended traffic routes, give information about traffic incidents, indoor navigation, search capabilities, elevation information, weather services and more.
✅ Experiment with some [mapping code samples](https://docs.microsoft.com/samples/browse/?products=azure-maps&WT.mc_id=academic-17441-jabenn)
✅ Experiment with some [mapping code samples](https://docs.microsoft.com/samples/browse?WT.mc_id=academic-17441-jabenn&products=azure-maps)
You can display the maps as a blank canvas, tiles, satellite images, satellite images with roads superimposed, various types of grayscale maps, maps with shaded relief to show elevation, night view maps, and a high contrast map. You can get real-time updates on your maps by integrating them with [Azure Event Grid](https://azure.microsoft.com/services/event-grid/?WT.mc_id=academic-17441-jabenn). You can control the behavior and look of your maps by enabling various controls to allow the map to react to events like pinch, drag, and click. To control the look of your map, you can add layers that include bubbles, lines, polygons, heat maps, and more. Which style of map you implement depends on your choice of SDK.
You can access Azure Maps APIs by leveraging its [REST API](https://docs.microsoft.com/javascript/api/azure-maps-rest/?view=azure-maps-typescript-latest&WT.mc_id=academic-17441-jabenn), its [Web SDK](https://docs.microsoft.com/azure/azure-maps/how-to-use-map-control?WT.mc_id=academic-17441-jabenn), or, if you are building a mobile app, its [Android SDK](https://docs.microsoft.com/azure/azure-maps/how-to-use-android-map-control-library?pivots=programming-language-java-android&WT.mc_id=academic-17441-jabenn).
You can access Azure Maps APIs by leveraging its [REST API](https://docs.microsoft.com/javascript/api/azure-maps-rest/?WT.mc_id=academic-17441-jabenn&view=azure-maps-typescript-latest), its [Web SDK](https://docs.microsoft.com/azure/azure-maps/how-to-use-map-control?WT.mc_id=academic-17441-jabenn), or, if you are building a mobile app, its [Android SDK](https://docs.microsoft.com/azure/azure-maps/how-to-use-android-map-control-library?WT.mc_id=academic-17441-jabenn&pivots=programming-language-java-android).
In this lesson, you will use the web SDK to draw a map and display your sensor's GPS location's path.
@ -7,8 +7,8 @@ In your code so far you have just logged the distance to the geofence. In this a
Azure Functions has many options for bindings, including to third-party services such as Twilio, a communications platform.
* Sign up for a free account at [Twilio.com](https://www.twilio.com)
* Read the documentation on binding Azure Functions to Twilio SMS on the [Microsoft docs Twilio binding for Azure Functions page](https://docs.microsoft.com/azure/azure-functions/functions-bindings-twilio?tabs=python&WT.mc_id=academic-17441-jabenn).
* Read the documentation on binding Azure Functions to Twilio SendGrid to send emails on the [Microsoft docs Azure Functions SendGrid bindings page](https://docs.microsoft.com/azure/azure-functions/functions-bindings-sendgrid?tabs=python&WT.mc_id=academic-17441-jabenn).
* Read the documentation on binding Azure Functions to Twilio SMS on the [Microsoft docs Twilio binding for Azure Functions page](https://docs.microsoft.com/azure/azure-functions/functions-bindings-twilio?WT.mc_id=academic-17441-jabenn&tabs=python).
* Read the documentation on binding Azure Functions to Twilio SendGrid to send emails on the [Microsoft docs Azure Functions SendGrid bindings page](https://docs.microsoft.com/azure/azure-functions/functions-bindings-sendgrid?WT.mc_id=academic-17441-jabenn&tabs=python).
* Add the binding to your Functions app to be notified on the GPS coordinates either inside or outside the geofence - not both.
@ -151,7 +151,7 @@ If you were to create a production device to sell to farms or factories, how wou
You trained your custom vision model using the portal. This relies on having images available - and in the real world you may not be able to get training data that matches what the camera on your device captures. You can work round this by training directly from your device using the training API, to train a model using images captured from your IoT device.
* Read up on the training API in the [using the Custom Vision SDK quick start](https://docs.microsoft.com/azure/cognitive-services/custom-vision-service/quickstarts/image-classification?tabs=visual-studio&pivots=programming-language-python&WT.mc_id=academic-17441-jabenn)
* Read up on the training API in the [using the Custom Vision SDK quick start](https://docs.microsoft.com/azure/cognitive-services/custom-vision-service/quickstarts/image-classification?WT.mc_id=academic-17441-jabenn&tabs=visual-studio&pivots=programming-language-python)
@ -463,7 +463,7 @@ Your container can now be deployed to your IoT Edge device. To deploy you need t
1. Connect to the IoT edge device:
* If you are using a Raspberry Pi to run IoT Edge, connect using ssh either from your terminal, or via a remote SSH session in VS Code
* If you are running IoT Edge in a Linux container on Windows, follow the steps in the [verify successful configuration guide](https://docs.microsoft.com/azure/iot-edge/how-to-install-iot-edge-on-windows?view=iotedge-2018-06&tabs=powershell&WT.mc_id=academic-17441-jabenn#verify-successful-configuration) to connect to the IoT Edge device.
* If you are running IoT Edge in a Linux container on Windows, follow the steps in the [verify successful configuration guide](https://docs.microsoft.com/azure/iot-edge/how-to-install-iot-edge-on-windows?WT.mc_id=academic-17441-jabenn&view=iotedge-2018-06&tabs=powershell#verify-successful-configuration) to connect to the IoT Edge device.
* If you are running IoT Edge on a virtual machine, you can SSH into the machine using the `adminUsername` and `password` you set when creating the VM, and using either the IP address or DNS name:
It's not just image classifiers that can be run on the edge, anything that can be packaged up into a container can be deployed to an IoT Edge device. Serverless code running as Azure Functions, such as the triggers you've created in earlier lessons can be run in containers, and therefor on IoT Edge.
Pick one of the previous lessons and try to run the Azure Functions app in an IoT Edge container. You can find a guide that shows how to do this using a different Functions app project in the [Tutorial: Deploy Azure Functions as IoT Edge modules on Microsoft docs](https://docs.microsoft.com/azure/iot-edge/tutorial-deploy-function?view=iotedge-2020-11&WT.mc_id=academic-17441-jabenn).
Pick one of the previous lessons and try to run the Azure Functions app in an IoT Edge container. You can find a guide that shows how to do this using a different Functions app project in the [Tutorial: Deploy Azure Functions as IoT Edge modules on Microsoft docs](https://docs.microsoft.com/azure/iot-edge/tutorial-deploy-function?WT.mc_id=academic-17441-jabenn&view=iotedge-2020-11).
@ -520,7 +520,7 @@ Rather than calling LUIS from the IoT device, you can use serverless code with a
This key will need to be added as a query parameter to the URL, so the final URL will be `https://<APP_NAME>.azurewebsites.net/api/text-to-timer?code=<FUNCTION_KEY>`, where `<APP_NAME>` will be the name of your functions app, and `<FUNCTION_KEY>` will be your default function key.
> 💁 You can change the type of authorization of the HTTP trigger using `authlevel` setting in the `function.json` file. You can read more about this in the [configuration section of the Azure Functions HTTP trigger documentation on Microsoft docs](https://docs.microsoft.com/azure/azure-functions/functions-bindings-http-webhook-trigger?tabs=python&WT.mc_id=academic-17441-jabenn#configuration).
> 💁 You can change the type of authorization of the HTTP trigger using `authlevel` setting in the `function.json` file. You can read more about this in the [configuration section of the Azure Functions HTTP trigger documentation on Microsoft docs](https://docs.microsoft.com/azure/azure-functions/functions-bindings-http-webhook-trigger?WT.mc_id=academic-17441-jabenn&tabs=python#configuration).
* Run the functions app locally, and access using the IP address - you can get the IP address of your computer on your local network, and use that to build the URL.
@ -552,7 +552,7 @@ There are many ways to request the same thing, such as setting a timer. Think of
* Read more about LUIS and it's capabilities on the [Language Understanding (LUIS) documentation page on Microsoft docs](https://docs.microsoft.com/azure/cognitive-services/luis/?WT.mc_id=academic-17441-jabenn)
* Read more about language understanding on the [natural-language understanding page on Wikipedia](https://wikipedia.org/wiki/Natural-language_understanding)
* Read more on HTTP triggers in the [Azure Functions HTTP trigger documentation on Microsoft docs](https://docs.microsoft.com/azure/azure-functions/functions-bindings-http-webhook-trigger?tabs=python&WT.mc_id=academic-17441-jabenn)
* Read more on HTTP triggers in the [Azure Functions HTTP trigger documentation on Microsoft docs](https://docs.microsoft.com/azure/azure-functions/functions-bindings-http-webhook-trigger?WT.mc_id=academic-17441-jabenn&tabs=python)
@ -470,7 +470,7 @@ The reason for running the functions app locally is because the `librosa` Pip pa
The way to do this is instead to deploy your functions app using a Docker container. This container is deployed by the cloud whenever it needs to spin up a new instance of your function app (such as when the demand exceeds the available resources, or if the function app hasn't been used for a while and is closed down).
You can find the instructions to set up a function app and deploy via Docker in the [create a function on Linux using a custom container documentation on Microsoft Docs](https://docs.microsoft.com/azure/azure-functions/functions-create-function-linux-custom-image?tabs=bash%2Cazurecli&pivots=programming-language-python&WT.mc_id=academic-17441-jabenn).
You can find the instructions to set up a function app and deploy via Docker in the [create a function on Linux using a custom container documentation on Microsoft Docs](https://docs.microsoft.com/azure/azure-functions/functions-create-function-linux-custom-image?WT.mc_id=academic-17441-jabenn&tabs=bash%2Cazurecli&pivots=programming-language-python).
Once this has been deployed, you can port your Wio Terminal code to access this function:
@ -38,4 +38,4 @@ Enter `y` to confirm and delete the Resource Group.
It will take a while to delete all the services.
> 💁 You can read more about deleting resource groups on the [Azure Resource Manager resource group and resource deletion documentation on Microsoft Docs](https://docs.microsoft.com/azure/azure-resource-manager/management/delete-resource-group?tabs=azure-cli&WT.mc_id=academic-17441-jabenn)
> 💁 You can read more about deleting resource groups on the [Azure Resource Manager resource group and resource deletion documentation on Microsoft Docs](https://docs.microsoft.com/azure/azure-resource-manager/management/delete-resource-group?WT.mc_id=academic-17441-jabenn&tabs=azure-cli)
Jim Bennett
4 years ago
committed by
GitHub