```
This means that the edited sender address was automatically replaced by a verified address before sending the message.
Note that this is independent of receiving messages.
**(34) How are identities matched?**
Identities are as expected matched by account. For incoming messages the *to*, *cc*, *bcc*, *from* and *(X-)delivered/envelope/original-to* addresses will be checked (in this order) and for outgoing messages (drafts, outbox and sent) only the *from* addresses will be checked.
The matched address will be shown as *via* in the addresses section of received messages (between the message header and message text).
Note that identities needs to be enabled to be able to be matched and that identities of other accounts will not be considered.
Matching will be done only once on receiving a message, so changing the configuration will not change existing messages. You could clear local messages by long pressing a folder in the folder list and synchronize the messages again though.
It is possible to configure a [regex](https://en.wikipedia.org/wiki/Regular_expression) in the identity settings to match the username of an email address (the part before the @ sign).
Note that the domain name (the parts after the @ sign) always needs to be equal to the domain name of the identity.
If you like to match a catch-all email address, this regex is mostly okay:
```
.*
```
If you like to match the special purpose email addresses abc@example.com and xyx@example.com and like to have a fallback email address main@example.com as well, you could do something like this:
* Identidad: abc@ejemplo.com; regex: **(?i)abc**
* Identidad: xyz@ejemplo.com; regex: **(?i)xyz**
* Identidad: main@ejemplo.com; regex: **^(?i)((?!abc|xyz).)\*$**
Matched identities can be used to color code messages. The identity color takes precedence over the account color. Setting identity colors is a pro feature.
**(35) Why should I be careful with viewing images, attachments, and the original message?**
Ver imágenes almacenadas de forma remota (vea también [estas Preguntas Frecuentes](#user-content-faq27)) podría no solo decirle al remitente que ha visto el mensaje, pero también filtrará su dirección IP.
Opening attachments or viewing an original message might load remote content and execute scripts, that might not only cause privacy sensitive information to leak, but can also be a security risk.
Note that your contacts could unknowingly send malicious messages if they got infected with malware.
FairEmail formats messages again causing messages to look different from the original, but also uncovering phishing links.
Note that reformatted messages are often better readable than original messages because the margins are removed, and font colors and sizes are standardized.
The Gmail app shows images by default by downloading the images through a Google proxy server. Since the images are downloaded from the source server [in real-time](https://blog.filippo.io/how-the-new-gmail-image-proxy-works-and-what-this-means-for-you/), this is even less secure because Google is involved too without providing much benefit.
You can show images and original messages by default for trusted senders on a case-by-case basis by checking *Do not ask this again for ...*.
If you want to reset the default *Open with* apps, please [see here](https://www.androidauthority.com/how-to-set-default-apps-android-clear-621269/).
**(36) How are settings files encrypted?**
Short version: AES 256 bit
Long version:
* La clave de 256 bits se genera con *PBKDF2WithHmacSHA1* usando un salt aleatorio segura de 128 bits y 65536 iteraciones
* El cifrado es *AES/CBC/PKCS5Padding*
**(37) How are passwords stored?**
All supported Android versions [encrypt all user data](https://source.android.com/security/encryption), so all data, including usernames, passwords, messages, etc, is stored encrypted.
If the device is secured with a PIN, pattern or password, you can make the account and identity passwords visible. If this is a problem because you are sharing the device with other people, consider to use [user profiles](https://www.howtogeek.com/333484/how-to-set-up-multiple-user-profiles-on-android/).
**(39) How can I reduce the battery usage of FairEmail?**
Recent Android versions by default report *app usage* as a percentage in the Android battery settings screen. **Confusingly, *app usage* is not the same as *battery usage* and is not even directly related to battery usage!** The app usage (while in use) will be very high because FairEmail is using a foreground service which is considered as constant app usage by Android. However, this doesn't mean that FairEmail is constantly using battery power. The real battery usage can be seen by navigating to this screen:
*Android settings*, *Battery*, three-dots menu *Battery usage*, three-dots menu *Show full device usage*
As a rule of thumb the battery usage should be below or in any case not be much higher than *Mobile network standby*. If this isn't the case, please let me know.
It is inevitable that synchronizing messages will use battery power because it requires network access and accessing the messages database.
If you are comparing the battery usage of FairEmail with another email client, please make sure the other email client is setup similarly. For example comparing always sync (push messages) and (infrequent) periodic checking for new messages is not a fair comparison.
Reconnecting to an email server will use extra battery power, so an unstable internet connection will result in extra battery usage. Also, some email servers prematurely terminate idle connections, while [the standard](https://tools.ietf.org/html/rfc2177) says that an idle connection should be kept open for 29 minutes. In these cases you might want to synchronize periodically, for example each hour, instead of continuously. Note that polling frequently (more than every 30-60 minutes) will likely use more battery power than synchronizing always because connecting to the server and comparing the local and remote messages are expensive operations.
[On some devices](https://dontkillmyapp.com/) it is necessary to *disable* battery optimizations (setup step 4) to keep connections to email servers open. In fact, leaving battery optimizations enabled can result in extra battery usage for all devices, even though this sounds contradictory!
Most of the battery usage, not considering viewing messages, is due to synchronization (receiving and sending) of messages. So, to reduce the battery usage, set the number of days to synchronize message for to a lower value, especially if there are a lot of recent messages in a folder. Long press a folder name in the folders list and select *Edit properties* to access this setting.
If you have at least once a day internet connectivity, it is sufficient to synchronize messages just for one day.
Note that you can set the number of days to *keep* messages for to a higher number than to *synchronize* messages for. You could for example initially synchronize messages for a large number of days and after this has been completed reduce the number of days to synchronize messages for, but leave the number of days to keep messages for.
In the receive settings you can enable to always synchronize starred messages, which will allow you to keep older messages around while synchronizing messages for a limited number of days.
Disabling the folder option *Automatically download message texts and attachments* will result in less network traffic and thus less battery usage. You could disable this option for example for the sent folder and the archive.
Synchronizing messages at night is mostly not useful, so you can save on battery usage by not synchronizing at night. In the settings you can select a schedule for message synchronization (this is a pro feature).
FairEmail will by default synchronize the folder list on each connection. Since folders are mostly not created, renamed and deleted very often, you can save some network and battery usage by disabling this in the receive settings.
FairEmail will by default check if old messages were deleted from the server on each connection. If you don't mind that old messages that were delete from the server are still visible in FairEmail, you can save some network and battery usage by disabling this in the receive settings.
Some providers don't follow the IMAP standard and don't keep connections open long enough, forcing FairEmail to reconnect often, causing extra battery usage. You can inspect the *Log* via the main navigation menu to check if there are frequent reconnects (connection closed/reset, read/write error/timeout, etc). You can workaround this by lowering the keep-alive interval in the advanced account settings to for example 9 or 15 minutes. Note that battery optimizations need to be disabled in setup step 4 to reliably keep connections alive.
Some providers send every two minutes something like '*Still here*' resulting in network traffic and your device to wake up and causing unnecessary extra battery usage. You can inspect the *Log* via the main navigation menu to check if your provider is doing this. If your provider is using [Dovecot](https://www.dovecot.org/) as IMAP server, you could ask your provider to change the [imap_idle_notify_interval](https://wiki.dovecot.org/Timeouts) setting to a higher value or better yet, to disable this. If your provider is not able or willing to change/disable this, you should consider to switch to periodically instead of continuous synchronization. You can change this in the receive settings.
If you got the message *This provider does not support push messages* while configuring an account, consider switching to a modern provider which supports push messages (IMAP IDLE) to reduce battery usage.
If your device has an [AMOLED](https://en.wikipedia.org/wiki/AMOLED) screen, you can save battery usage while viewing messages by switching to the black theme.
If auto optimize in the receive settings is enabled, an account will automatically be switched to periodically checking for new messages when the email server:
* Dice '*Todavía aquí*' dentro de 3 minutos
* El servidor de correo no soporta mensajes push
* El intervalo de keep-alive es inferior a 12 minutos
In addition, the trash and spam folders will be automatically set to checking for new messages after three successive [too many simultaneous connections](#user-content-faq23) errors.
**(40) How can I reduce the data usage of FairEmail?**
You can reduce the data usage basically in the same way as reducing battery usage, see the previous question for suggestions.
It is inevitable that data will be used to synchronize messages.
If the connection to the email server is lost, FairEmail will always synchronize the messages again to make sure no messages were missed. If the connection is unstable, this can result in extra data usage. In this case, it is a good idea to decrease the number of days to synchronize messages for to a minimum (see the previous question) or to switch to periodically synchronizing of messages (receive settings).
By default FairEmail does not download message texts and attachments larger than 256 KiB when there is a metered (mobile or paid Wi-Fi) internet connection. You can change this in the connection settings.
**(41) How can I fix the error 'Handshake failed' ?**
There are several possible causes, so please read to the end of this answer.
The error '*Handshake failed ... WRONG_VERSION_NUMBER ...*' might mean that you are trying to connect to an IMAP or SMTP server without an encrypted connection, typically using port 143 (IMAP) and port 25 (SMTP), or that a wrong protocol (SSL/TLS or STARTTLS) is being used.
Most providers provide encrypted connections using different ports, typically port 993 (IMAP) and port 465/587 (SMTP).
If your provider doesn't support encrypted connections, you should ask to make this possible. If this isn't an option, you could enable *Allow insecure connections* both in the advanced settings AND the account/identity settings.
Vea también [estas Preguntas Frecuentes](#user-content-faq4).
El error '*Handshake falló ... SSLV3_ALERT_ILLEGAL_PARAMETER ...*' is either caused by a bug in the SSL protocol implementation or by a too short DH key on the email server and can unfortunately not be fixed by FairEmail.
El error '*Handshake falló ... HANDSHAKE_FAILURE_ON_CLIENT_HELLO ...*' might be caused by the provider still using RC4, which isn't supported since [Android 7](https://developer.android.com/about/versions/nougat/android-7.0-changes.html#tls-ssl) anymore.
The error '*Handshake failed ... UNSUPPORTED_PROTOCOL or TLSV1_ALERT_PROTOCOL_VERSION ...*' might be caused by enabling hardening connections in the connection settings or by Android not supporting older protocols anymore, like SSLv3.
Android 8 Oreo and later [do not support](https://developer.android.com/about/versions/oreo/android-8.0-changes#security-all) SSLv3 anymore. There is no way to workaround lacking RC4 and SSLv3 support because it has completely been removed from Android (which should say something).
You can use [this website](https://ssl-tools.net/mailservers) or [this website](https://www.immuniweb.com/ssl/) to check for SSL/TLS problems of email servers.
**(42) Can you add a new provider to the list of providers?**
If the provider is used by more than a few people, yes, with pleasure.
The following information is needed:
```
// esto no es necesario
```
The EFF [writes](https://www.eff.org/nl/deeplinks/2018/06/announcing-starttls-everywhere-securing-hop-hop-email-delivery): "*Additionally, even if you configure STARTTLS perfectly and use a valid certificate, there’s still no guarantee your communication will be encrypted.*"
So, pure SSL connections are safer than using [STARTTLS](https://en.wikipedia.org/wiki/Opportunistic_TLS) and therefore preferred.
Please make sure receiving and sending messages works properly before contacting me to add a provider.
See below about how to contact me.
**(43) Can you show the original ... ?**
Show original, shows the original message as the sender has sent it, including original fonts, colors, margins, etc. FairEmail does and will not alter this in any way, except for requesting [TEXT_AUTOSIZING](https://developer.android.com/reference/android/webkit/WebSettings.LayoutAlgorithm), which will *attempt* to make small text more readable.
**~~(44) Can you show contact photos / identicons in the sent folder?~~**
~~Contact photos and identicons are always shown for the sender because this is necessary for conversation threads.~~ ~~Getting contact photos for both the sender and receiver is not really an option because getting contact photo is an expensive operation.~~
**(45) How can I fix 'This key is not available. To use it, you must import it as one of your own!' ?**
You'll get the message *This key is not available. To use it, you must import it as one of your own!* when trying to decrypt a message with a public key. To fix this you'll need to import the private key.
**(46) Why does the message list keep refreshing?**
If you see a 'spinner' at the top of the message list, the folder is still being synchronized with the remote server. You can see the progress of the synchronization in the folder list. See the legend about what the icons and numbers mean.
The speed of your device and internet connection and the number of days to synchronize messages for determine how long synchronization will take. Tenga en cuenta que no debería establecer el número de días para sincronizar mensajes a más de un día en la mayoría de los casos, vea también [estas Preguntas Frecuentes](#user-content-faq39).
**(47) How do I solve the error 'No primary account or no drafts folder' ?**
You'll get the error message *No primary account or no drafts folder* when trying to compose a message while there is no account set to be the primary account or when there is no drafts folder selected for the primary account. This can happen for example when you start FairEmail to compose a message from another app. FairEmail needs to know where to store the draft, so you'll need to select one account to be the primary account and/or you'll need to select a drafts folder for the primary account.
This can also happen when you try to reply to a message or to forward a message from an account with no drafts folder while there is no primary account or when the primary account does not have a drafts folder.
Consulte [estas Preguntas Frecuentes](#user-content-faq141) para obtener más información.
**~~(48) How do I solve the error 'No primary account or no archive folder' ?~~**
~~You'll get the error message *No primary account or no archive folder* when searching for messages from another app. FairEmail needs to know where to search, so you'll need to select one account to be the primary account and/or you'll need to select a archive folder for the primary account.~~
**(49) How do I fix 'An outdated app sent a file path instead of a file stream' ?**
You likely selected or sent an attachment or image with an outdated file manager or an outdated app which assumes all apps still have storage permissions. For security and privacy reasons modern apps like FairEmail have no full access to all files anymore. This can result into the error message *An outdated app sent a file path instead of a file stream* if a file name instead of a file stream is being shared with FairEmail because FairEmail cannot randomly open files.
You can fix this by switching to an up-to-date file manager or an app designed for recent Android versions. Alternatively, you can grant FairEmail read access to the storage space on your device in the Android app settings. Note that this workaround [won't work on Android Q](https://developer.android.com/preview/privacy/scoped-storage) anymore.
See also [question 25](#user-content-faq25) and [what Google writes about it](https://developer.android.com/training/secure-file-sharing/share-file#RespondToRequest).
**(50) Can you add an option to synchronize all messages?**
A synchronize all (download all) messages will not be added because it can easily result in out of memory errors and the available storage space filling up. It can also easily result in a lot of battery and data usage. Mobile devices are just not very suitable to download and store years of messages. You can better use the search on server function (see [question 13](#user-content-faq13)), which is faster and more efficient. Note that searching through a lot of messages stored locally would only delay searching and use extra battery power.
**(51) How are folders sorted?**
Folders are first sorted on account order (by default on account name) and within an account with special, system folders on top, followed by folders set to synchronize. Within each category the folders are sorted on (display) name. You can set the display name by long pressing a folder in the folder list and selecting *Edit properties*.
The navigation (hamburger) menu item *Order folders* in the setup can be used to manually order the folders.
**(52) Why does it take some time to reconnect to an account?**
There is no reliable way to know if an account connection was terminated gracefully or forcefully. Trying to reconnect to an account while the account connection was terminated forcefully too often can result in problems like [too many simultaneous connections](#user-content-faq23) or even the account being blocked. To prevent such problems, FairEmail waits 90 seconds until trying to reconnect again.
You can long press *Settings* in the navigation menu to reconnect immediately.
**(53) Can you stick the message action bar to the top/bottom?**
The message action bar works on a single message and the bottom action bar works on all the messages in the conversation. Since there is often more than one message in a conversation, this is not possible. Moreover, there are quite some message specific actions, like forwarding.
Moving the message action bar to the bottom of the message is visually not appealing because there is already a conversation action bar at the bottom of the screen.
Note that there are not many, if any, email apps that display a conversation as a list of expandable messages. This has a lot of advantages, but the also causes the need for message specific actions.
**~~(54) How do I use a namespace prefix?~~**
~~A namespace prefix is used to automatically remove the prefix providers sometimes add to folder names.~~
~~For example the Gmail spam folder is called:~~
```
[Gmail]/Spam
```
~~By setting the namespace prefix to *[Gmail]* FairEmail will automatically remove *[Gmail]/* from all folder names.~~
**(55) How can I mark all messages as read / move or delete all messages?**
You can use multiple select for this. Long press the first message, don't lift your finger and slide down to the last message. Then use the three dot action button to execute the desired action.
**(56) Can you add support for JMAP?**
There are almost no providers offering the [JMAP](https://jmap.io/) protocol, so it is not worth a lot of effort to add support for this to FairEmail.
**(57) Can I use HTML in signatures?**
Yes, you can use [HTML](https://en.wikipedia.org/wiki/HTML). In the signature editor you can switch to HTML mode via the three-dots menu.
Note that if you switch back to the text editor that not all HTML might be rendered as-is because the Android text editor is not able to render all HTML. Similarly, if you use the text editor, the HTML might be altered in unexpected ways.
If you want to use preformatted text, like [ASCII art](https://en.wikipedia.org/wiki/ASCII_art), you should wrap the text in a *pre* element, like this:
```
|\_/|
/ @ @ \
( > o < )
`>>x<<́
/ O \
```
**(58) What does an open/closed email icon mean?**
The email icon in the folder list can be open (outlined) or closed (solid):
Message bodies and attachments are not downloaded by default.
Message bodies and attachments are downloaded by default.
**(59) Can original messages be opened in the browser?**
For security reasons the files with the original message texts are not accessible to other apps, so this is not possible. In theory the [Storage Access Framework](https://developer.android.com/guide/topics/providers/document-provider) could be used to share these files, but even Google's Chrome cannot handle this.
**(60) Did you know ... ?**
* ¿Sabía que los mensajes favoritos pueden sincronizarse/mantenerse siempre? (esto puede ser activado en la configuración de recepción)
* ¿Sabía que puede mantener presionado el icono de 'redactar mensaje' para ir a la carpeta de borradores?
* ¿Sabía que hay una opción avanzada para marcar mensajes leídos al ser movidos? (archivar y enviar a papelera también es moverlos)
* ¿Sabía que puede seleccionar texto (o una dirección de correo electrónico) en cualquier aplicación en versiones recientes de Android y dejar que FairEmail lo busque?
* ¿Sabía que FairEmail tiene un modo tablet? Gire su dispositivo a modo apaisado y los hilos de conversación se abrirán en una segunda columna si hay suficiente espacio en la pantalla.
* ¿Sabía que puede mantener presionada una plantilla de respuesta para crear un borrador de mensaje a partir de la plantilla?
* ¿Sabía que puede dejar pulsado, mantener y deslizar para seleccionar una gama de mensajes?
* ¿Sabía que puede volver a intentar enviar mensajes tirando hacia abajo para actualizar en la bandeja de salida?
* ¿Sabía que puede deslizar una conversación a la izquierda o a la derecha para ir a la conversación siguiente o anterior?
* ¿Sabía que puede pulsar en una imagen para ver de dónde se descargará?
* ¿Sabía que puede mantener pulsado el icono de la carpeta en la barra de acciones para seleccionar una cuenta?
* ¿Sabía que puede mantener presionado el icono de la estrella en un hilo de conversación para establecer una estrella de color?
* ¿Sabía que puede abrir el cajón de navegación deslizando desde la izquierda, incluso cuando ve una conversación?
* ¿Sabía que puede mantener pulsado el icono de la persona para mostrar/ocultar los campos CC/CCO y recordar el estado de visibilidad para la próxima vez?
* ¿Sabía que puede insertar las direcciones de correo electrónico de un grupo de contactos Android a través del menú de tres puntos?
* ¿Sabía que si selecciona texto y pulsa responder, sólo se citará el texto seleccionado?
* Did you know that you can long press the trash icons (both in the message and the bottom action bar) to permanently delete a message or conversation? (version 1.1368+)
**(61) Why are some messages shown dimmed?**
Messages shown dimmed (grayed) are locally moved messages for which the move is not confirmed by the server yet. This can happen when there is no connection to the server or the account (yet). These messages will be synchronized after a connection to the server and the account has been made or, if this never happens, will be deleted if they are too old to be synchronized.
You might need to manually synchronize the folder, for example by pulling down.
You can view these messages, but you cannot move these messages again until the previous move has been confirmed.
Pending [operations](#user-content-faq3) are shown in the operations view accessible from the main navigation menu.
**(62) Which authentication methods are supported?**
The following authentication methods are supported and used in this order:
* LOGIN
* PLAIN
* CRAM-MD5
* XOAUTH2 ([Gmail](https://developers.google.com/gmail/imap/xoauth2-protocol), [Yandex](https://tech.yandex.com/oauth/))
* NTLM (no probado)
SASL authentication methods, besides CRAM-MD5, are not supported because [JavaMail for Android](https://javaee.github.io/javamail/Android) does not support SASL authentication.
If your provider requires an unsupported authentication method, you'll likely get the error message *authentication failed*.
[Server Name Indication](https://en.wikipedia.org/wiki/Server_Name_Indication) is supported by [all supported Android versions](https://developer.android.com/training/articles/security-ssl).
**(63) How are images resized for displaying on screens?**
Large inline or attached [PNG](https://en.wikipedia.org/wiki/Portable_Network_Graphics) and [JPEG](https://en.wikipedia.org/wiki/JPEG) images will automatically be resized for displaying on screens. This is because email messages are limited in size, depending on the provider mostly between 10 and 50 MB. Images will by default be resized to a maximum width and height of about 1440 pixels and saved with a compression ratio of 90 %. Images are scaled down using whole number factors to reduce memory usage and to retain image quality. Automatically resizing of inline and/or attached images and the maximum target image size can be configured in the send settings.
If you want to resize images on a case-by-case basis, you can use [Send Reduced](https://f-droid.org/en/packages/mobi.omegacentauri.SendReduced/) or a similar app.
**~~(64) Can you add custom actions for swipe left/right?~~**
~~The most natural thing to do when swiping a list entry left or right is to remove the entry from the list.~~ ~~The most natural action in the context of an email app is moving the message out of the folder to another folder.~~ ~~You can select the folder to move to in the account settings.~~
~~Other actions, like marking messages read and snoozing messages are available via multiple selection.~~ ~~You can long press a message to start multiple selection. Vea también [esta pregunta](#user-content-faq55).~~
~~Swiping left or right to mark a message read or unread is unnatural because the message first goes away and later comes back in a different shape.~~ ~~Note that there is an advanced option to mark messages automatically read on moving,~~ ~~which is in most cases a perfect replacement for the sequence mark read and move to some folder.~~ ~~You can also mark messages read from new message notifications.~~
~~If you want to read a message later, you can hide it until a specific time by using the *snooze* menu.~~
**(65) Why are some attachments shown dimmed?**
Inline (image) attachments are shown dimmed. Se supone que [los adjuntos embebidos](https://tools.ietf.org/html/rfc2183) se descargarán y mostrarán automáticamente, pero dado que FairEmail no siempre descarga archivos adjuntos automáticamente, vea también [estas Preguntas Frecuentes](#user-content-faq40), FairEmail muestra todos los tipos de archivos adjuntos. To distinguish inline and regular attachments, inline attachments are shown dimmed.
**(66) Is FairEmail available in the Google Play Family Library?**
The price of FairEmail is too low, lower than that of most similar apps, and there are [too many fees and taxes](#user-content-faq19), Google alone already takes 30 %, to justify making FairEmail available in the [Google Play Family Library](https://support.google.com/googleone/answer/7007852). Note that Google promotes the Family libray, but lets developers pay for it and doesn't contribute anything.
**(67) How can I snooze conversations?**
Multiple select one of more conversations (long press to start multiple selecting), tap the three dot button and select *Snooze ...*. Alternatively, in the expanded message view use *Snooze ...* in the message three-dots 'more' menu or the timelapse action in the bottom action bar. Select the time the conversation(s) should snooze and confirm by tapping OK. The conversations will be hidden for the selected time and shown again afterwards. You will receive a new message notification as reminder.
It is also possible to snooze messages with [a rule](#user-content-faq71).
You can show snoozed messages by unchecking *Filter out* > *Hidden* in the three dot overflow menu.
You can tap on the small snooze icon to see until when a conversation is snoozed.
By selecting a zero snooze duration you can cancel snoozing.
**~~(68) Why can Adobe Acrobat reader not open PDF attachments / Microsoft apps not open attached documents?~~**
~~Adobe Acrobat reader and Microsoft apps still expects full access to all stored files,~~ ~~while apps should use the [Storage Access Framework](https://developer.android.com/guide/topics/providers/document-provider) since Android KitKat (2013)~~ ~~to have access to actively shared files only. This is for privacy and security reasons.~~
~~You can workaround this by saving the attachment and opening it from the Adobe Acrobat reader / Microsoft app,~~ ~~but you are advised to install an up-to-date and preferably open source PDF reader / document viewer,~~ ~~for example one listed [here](https://github.com/offa/android-foss#-document--pdf-viewer).~~
**(69) Can you add auto scroll up on new message?**
The message list is automatically scrolled up when navigating from a new message notification or after a manual refresh. Always automatically scrolling up on arrival of new messages would interfere with your own scrolling, but if you like you can enable this in the settings.
**(70) When will messages be auto expanded?**
When navigation to a conversation one message will be expanded if:
* Sólo hay un mensaje en la conversación
* Hay exactamente un mensaje no leído en la conversación
There is one exception: the message was not downloaded yet and the message is too large to download automatically on a metered (mobile) connection. You can set or disable the maximum message size on the 'connection' settings tab.
Duplicate (archived) messages, trashed messages and draft messages are not counted.
Messages will automatically be marked read on expanding, unless this was disabled in the individual account settings.
**(71) How do I use filter rules?**
You can edit filter rules by long pressing a folder in the folder list.
New rules will be applied to new messages received in the folder, not to existing messages. You can check the rule and apply the rule to existing messages or, alternatively, long press the rule in the rule list and select *Execute now*.
You'll need to give a rule a name and you'll need to define the order in which a rule should be executed relative to other rules.
You can disable a rule and you can stop processing other rules after a rule has been executed.
The following rule conditions are available:
* El remitente contiene
* El destinatario contiene
* El asunto contiene
* Tiene archivos adjuntos
* El encabezado contiene
* Día/hora entre
All the conditions of a rule need to be true for the rule action to be executed. All conditions are optional, but there needs to be at least one condition, to prevent matching all messages. If you want to match all senders or all recipients, you can just use the @ character as condition because all email addresses will contain this character.
Note that email addresses are formatted like this:
`
"Somebody" `
You can use multiple rules, possibly with a *stop processing*, for an *or* or a *not* condition.
Matching is not case sensitive, unless you use [regular expressions](https://en.wikipedia.org/wiki/Regular_expression). Please see [here](https://developer.android.com/reference/java/util/regex/Pattern) for the documentation of Java regular expressions. You can test a regex [here](https://regexr.com/).
Note that a regular expression supports an *or* operator, so if you want to match multiple senders, you can do this:
`
.*alice@example\.org.*|.*bob@example\.org.*|.*carol@example\.org.*`
Note that [dot all mode](https://developer.android.com/reference/java/util/regex/Pattern#DOTALL) is enabled to be able to match [unfolded headers](https://tools.ietf.org/html/rfc2822#section-3.2.3).
You can select one of these actions to apply to matching messages:
* Ninguna acción (útil para *no*)
* Marcar como leído
* Marcar como no leído
* Ocultar
* Suprimir notificación
* Posponer
* Destacar
* Establecer importancia (prioridad local)
* Añadir palabra clave
* Mover
* Copiar (Gmail: etiqueta)
* Responder (con plantilla)
* Texto a voz (remitente y asunto)
* Automatización (Tasker, etc.)
Rules are applied directly after the message header has been fetched, but before the message text has been downloaded, so it is not possible to apply conditions to the message text. Note that large message texts are downloaded on demand on a metered connection to save on data usage.
If you want to forward a message, consider to use the move action instead. This will be more reliable than forwarding as well because forwarded messages might be considered as spam.
Since message headers are not downloaded and stored by default to save on battery and data usage and to save storage space it is not possible to preview which messages would match a header rule condition.
Some common header conditions (regex):
* *.*Auto-Submitted:.** [RFC3834](https://tools.ietf.org/html/rfc3834)
* *.*Content-Type: multipart/report.** [RFC3462](https://tools.ietf.org/html/rfc3462)
In the three-dots *more* message menu there is an item to create a rule for a received message with the most common conditions filled in.
The POP3 protocol does not support setting keywords and moving or copying messages.
Using rules is a pro feature.
**(72) What are primary accounts/identities?**
The primary account is used when the account is ambiguous, for example when starting a new draft from the unified inbox.
Similarly, the primary identity of an account is used when the identity is ambiguous.
There can be just one primary account and there can be just one primary identity per account.
**(73) Is moving messages across accounts safe/efficient?**
Moving messages across accounts is safe because the raw, original messages will be downloaded and moved and because the source messages will be deleted only after the target messages have been added
Batch moving messages across accounts is efficient if both the source folder and target folder are set to synchronize, else FairEmail needs to connect to the folder(s) for each message.
**(74) Why do I see duplicate messages?**
Some providers, notably Gmail, list all messages in all folders, except trashed messages, in the archive (all messages) folder too. FairEmail shows all these messages in a non obtrusive way to indicate that these messages are in fact the same message.
Gmail allows one message to have multiple labels, which are presented to FairEmail as folders. This means that messages with multiple labels will be shown multiple times as well.
**(75) Can you make an iOS, Windows, Linux, etc version?**
A lot of knowledge and experience is required to successfully develop an app for a specific platform, which is why I develop apps for Android only.
**(76) What does 'Clear local messages' do?**
The folder menu *Clear local messages* removes messages from the device which are present on the server too. It does not delete messages from the server. This can be useful after changing the folder settings to not download the message content (text and attachments), for example to save space.
**(77) Why are messages sometimes shown with a small delay?**
Depending on the speed of your device (processor speed and maybe even more memory speed) messages might be displayed with a small delay. FairEmail is designed to dynamically handle a large number of messages without running out of memory. This means that messages needs to be read from a database and that this database needs to be watched for changes, both of which might cause small delays.
Some convenience features, like grouping messages to display conversation threads and determining the previous/next message, take a little extra time. Note that there is no *the* next message because in the meantime a new message might have been arrived.
When comparing the speed of FairEmail with similar apps this should be part of the comparison. It is easy to write a similar, faster app which just displays a lineair list of messages while possible using too much memory, but it is not so easy to properly manage resource usage and to offer more advanced features like conversation threading.
FairEmail is based on the state-of-the-art [Android architecture components](https://developer.android.com/topic/libraries/architecture/), so there is little room for performance improvements.
**(78) How do I use schedules?**
In the receive settings you can enable scheduling and set the time period and the day of weeks when messages should be received.
Note that an end time equal to or earlier than the start time is considered to be 24 hours later.
For more complex schemes you could set one or more accounts to manual synchronization and send this command to FairEmail to check for new messages:
```
(adb shell) am startservice -a eu.faircode.email.POLL
```
For a specific account:
```
(adb shell) am startservice -a eu.faircode.email.POLL --es account Gmail
```
You can also automate turning receiving messages on and off by sending these commands to FairEmail:
```
(adb shell) am startservice -a eu.faircode.email.ENABLE
(adb shell) am startservice -a eu.faircode.email.DISABLE
```
To enable/disable a specific account:
```
(adb shell) am startservice -a eu.faircode.email.ENABLE --es account Gmail
(adb shell) am startservice -a eu.faircode.email.DISABLE --es account Gmail
```
Note that disabling an account will hide the account and all associated folders and messages.
You can automatically send commands with for example [Tasker](https://tasker.joaoapps.com/userguide/en/intents.html):
```
Nueva tarea: Algo reconocible
Categoría de acción: Misc/Intento de envío
Acción: eu.faircode.email.ENABLE
Objetivo: Servicio
```
To enable/disable an account with the name *Gmail*:
```
Extras: account:Gmail
```
Account names are case sensitive.
Automation can be used for more advanced schedules, like for example multiple synchronization periods per day or different synchronization periods for different days.
It is possible to install FairEmail in multiple user profiles, for example a personal and a work profile, and to configure FairEmail differently in each profile, which is another possibility to have different synchronization schedules and to synchronize a different set of accounts.
It is also possible to create [rules](#user-content-faq71) with a time condition and to snooze messages until the end time of the time condition. This way it is possible to snooze business related messages until the start of the business hours. This also means that the messages will be on your device for when there is no internet connection, for example when flying.
Note that recent Android versions allow overriding DND (Do Not Disturb) per notification channel and per app, which could be used to (not) silence specific notifications.
Scheduling is a pro feature.
**(79) How do I use synchronize on demand (manual)?**
Normally, FairEmail maintains a connection to the configured email servers whenever possible to receive messages in real-time. If you don't want this, for example to be not disturbed or to save on battery usage, just disable receiving in the receive settings. This will stop the background service which takes care of automatic synchronization and will remove the associated status bar notification.
You can also enable *Synchronize manually* in the advanced account settings if you want to manually synchronize specific accounts only.
You can use pull-down-to-refresh in a message list or use the folder menu *Synchronize now* to manually synchronize messages.
If you want to synchronize some or all folders of an account manually, just disable synchronization for the folders (but not of the account).
You'll likely want to disabled [browse on server](#user-content-faq24) too.
**~~(80) How do I fix the error 'Unable to load BODYSTRUCTURE' ?~~**
~~The error message *Unable to load BODYSTRUCTURE* is caused by bugs in the email server,~~ ~~see [here](https://javaee.github.io/javamail/FAQ#imapserverbug) for more details.~~
~~FairEmail already tries to workaround these bugs, but if this fail you'll need to ask for support from your provider.~~
**~~(81) Can you make the background of the original message dark in the dark theme?~~**
~~The original message is shown as the sender has sent it, including all colors.~~ ~~Changing the background color would not only make the original view not original anymore, it can also result in unreadable messages.~~
**(82) What is a tracking image?**
Please see [here](https://en.wikipedia.org/wiki/Web_beacon) about what a tracking image exactly is. In short tracking images keep track if you opened a message.
FairEmail will in most cases automatically recognize tracking images and replace them by this icon:
Automatic recognition of tracking images can be disabled in the privacy settings.
**(84) What are local contacts for?**
Local contact information is based on names and addresses found in incoming and outgoing messages.
The main use of the local contacts storage is to offer auto completion when no contacts permission has been granted to FairEmail.
Another use is to generate [shortcuts](#user-content-faq31) on recent Android versions to quickly send a message to frequently contacted people. This is also why the number of times contacted and the last time contacted is being recorded and why you can make a contact a favorite or exclude it from favorites by long pressing it.
The list of contacts is sorted on number of times contacted and the last time contacted.
By default only names and addresses to whom you send messages to will be recorded. You can change this in the send settings.
**(85) Why is an identity not available?**
An identity is available for sending a new message or replying or forwarding an existing message only if:
* la identidad está configurada para sincronizar (enviar mensajes)
* la cuenta asociada está configurada para sincronizar (recibir mensajes)
* la cuenta asociada tiene una carpeta de borradores
FairEmail will try to select the best identity based on the *to* address of the message replied to / being forwarded.
**~~(86) What are 'extra privacy features'?~~**
~~The advanced option *extra privacy features* enables:~~
* ~~Buscar al dueño de la dirección IP de un enlace~~
* ~~Detección y eliminación de [imágenes de seguimiento](#user-content-faq82)~~
**(87) What does 'invalid credentials' mean?**
The error message *invalid credentials* means either that the user name and/or password is incorrect, for example because the password was changed or expired, or that the account authorization has expired.
If the password is incorrect/expired, you will have to update the password in the account and/or identity settings.
If the account authorization has expired, you will have to select the account again. You will likely need to save the associated identity again as well.
**(88) How can I use a Yahoo, AOL or Sky account?**
To authorize a Yahoo, AOL, or Sky account you will need to create an app password. For instructions, please see here:
* [para Yahoo](https://help.yahoo.com/kb/generate-third-party-passwords-sln15241.html)
* [para AOL](https://help.aol.com/articles/Create-and-manage-app-password)
* [para Sky](https://www.sky.com/help/articles/getting-started-with-sky-yahoo-mail) (bajo *Otras aplicaciones de correo*)
Por favor vea [estas Preguntas Frecuentes](#user-content-faq111) sobre el soporte de OAuth.
Note that Yahoo, AOL, and Sky do not support standard push messages. The Yahoo email app uses a proprietary, undocumented protocol for push messages.
Push messages require [IMAP IDLE](https://en.wikipedia.org/wiki/IMAP_IDLE) and the Yahoo email server does not report IDLE as capability:
```
Y1 CAPABILITY
* CAPABILITY IMAP4rev1 ID MOVE NAMESPACE XYMHIGHESTMODSEQ UIDPLUS LITERAL+ CHILDREN X-MSG-EXT UNSELECT OBJECTID
Y1 OK CAPABILITY completed
```
**(89) How can I send plain text only messages?**
By default FairEmail sends each message both as plain text and as HTML formatted text because almost every receiver expects formatted messages these days. If you want/need to send plain text messages only, you can enable this in the advanced identity options. You might want to create a new identity for this if you want/need to select sending plain text messages on a case-by-case basis.
**(90) Why are some texts linked while not being a link?**
FairEmail will automatically link not linked web links (http and https) and not linked email addresses (mailto) for your convenience. However, texts and links are not easily distinguished, especially not with lots of [top level domains](https://en.wikipedia.org/wiki/List_of_Internet_top-level_domains) being words. This is why texts with dots are sometimes incorrectly recognized as links, which is better than not recognizing some links.
Links for the tel, geo, rtsp and xmpp protocols will be recognized too, but links for less usual or less safe protocols like telnet and ftp will not be recognized.
**~~(91) Can you add periodical synchronization to save battery power?~~**
~~Synchronizing messages is an expensive proces because the local and remote messages need to be compared,~~ ~~so periodically synchronizing messages will not result in saving battery power, more likely the contrary.~~
~~Vea [estas Preguntas Frecuentes](#user-content-faq39) sobre cómo optimizar el uso de la batería.~~
**(92) Can you add spam filtering, verification of the DKIM signature and SPF authorization?**
Spam filtering, verification of the [DKIM](https://en.wikipedia.org/wiki/DomainKeys_Identified_Mail) signature and [SPF](https://en.wikipedia.org/wiki/Sender_Policy_Framework) authorization is a task of email servers, not of an email client. Servers generally have more memory and computing power, so they are much better suited to this task than battery-powered devices. Also, you'll want spam filtered for all your email clients, possibly including web email, not just one email client. Moreover, email servers have access to information, like the IP address, etc of the connecting server, which an email client has no access to.
Of course you can report messages as spam with FairEmail, which will move the reported messages to the spam folder and train the spam filter of the provider, which is how it is supposed to work. Esto también se puede hacer automáticamente con [reglas de filtro](#user-content-faq71). Blocking the sender will create a filter rule to automatically move future messages of the same sender into the spam folder.
Note that you should not delete spam messages, also not from the spam folder, because the email server uses the messages in the spam folder to "learn" what spam messages are.
If you receive a lot of spam messages in your inbox, the best you can do is to contact the email provider to ask if spam filtering can be improved.
Also, FairEmail can show a small red warning flag when DKIM, SPF or [DMARC](https://en.wikipedia.org/wiki/DMARC) authentication failed on the receiving server. You can enable/disable [authentication verification](https://en.wikipedia.org/wiki/Email_authentication) in the display settings.
FairEmail can show a warning flag too if the domain name of the (reply) email address of the sender does not define an MX record pointing to an email server. This can be enabled in the receive settings. Be aware that this will slow down synchronization of messages significantly.
If legitimate messages are failing authentication, you should notify the sender because this will result in a high risk of messages ending up in the spam folder. Moreover, without proper authentication there is a risk the sender will be impersonated. The sender might use [this tool](https://www.mail-tester.com/) to check authentication and other things.
**(93) Can you allow installation/data storage on external storage media (sdcard)?**
FairEmail uses services and alarms, provides widgets and listens for the boot completed event to be started on device start, so it is not possible to store the app on external storage media, like an sdcard. See also [here](https://developer.android.com/guide/topics/data/install-location).
Messages, attachments, etc stored on external storage media, like an sdcard, can be accessed by other apps and is therefore not safe. See [here](https://developer.android.com/training/data-storage) for the details.
When needed you can save (raw) messages via the three-dots menu just above the message text and save attachments by tapping on the floppy icon.
If you need to save on storage space, you can limit the number of days messages are being synchronized and kept for. You can change these settings by long pressing a folder in the folder list and selecting *Edit properties*.
**(94) What does the red/orange stripe at the end of the header mean?**
The red/orange stripe at the left side of the header means that the DKIM, SPF or DMARC authentication failed. Vea también [estas Preguntas Frecuentes](#user-content-faq92).
**(95) Why are not all apps shown when selecting an attachment or image?**
For privacy and security reasons FairEmail does not have permissions to directly access files, instead the Storage Access Framework, available and recommended since Android 4.4 KitKat (released in 2013), is used to select files.
If an app is listed depends on if the app implements a [document provider](https://developer.android.com/guide/topics/providers/document-provider). If the app is not listed, you might need to ask the developer of the app to add support for the Storage Access Framework.
Android Q will make it harder and maybe even impossible to directly access files, see [here](https://developer.android.com/preview/privacy/scoped-storage) and [here](https://www.xda-developers.com/android-q-storage-access-framework-scoped-storage/) for more details.
**(96) Where can I find the IMAP and SMTP settings?**
The IMAP settings are part of the (custom) account settings and the SMTP settings are part of the identity settings.
**(97) What is 'cleanup' ?**
About each four hours FairEmail runs a cleanup job that:
* Elimina los textos de mensajes antiguos
* Elimina archivos adjuntos antiguos
* Elimina archivos de imagen antiguos
* Elimina contactos locales antiguos
* Elimina entradas antiguas del log
Note that the cleanup job will only run when the synchronize service is active.
**(98) Why can I still pick contacts after revoking contacts permissions?**
After revoking contacts permissions Android does not allow FairEmail access to your contacts anymore. However, picking contacts is delegated to and done by Android and not by FairEmail, so this will still be possible without contacts permissions.
**(99) Can you add a rich text or markdown editor?**
FairEmail provides common text formatting (bold, italic, underline, text size and color) via a toolbar that appears after selecting some text.
A [Rich text](https://en.wikipedia.org/wiki/Formatted_text) or [Markdown](https://en.wikipedia.org/wiki/Markdown) editor would not be used by many people on a small mobile device and, more important, Android doesn't support a rich text editor and most rich text editor open source projects are abandoned. See [here](https://forum.xda-developers.com/showpost.php?p=79061829&postcount=4919) for some more details about this.
**(100) How can I synchronize Gmail categories?**
You can synchronize Gmail categories by creating filters to label categorized messages:
* Crear un nuevo filtro vía Gmail > Configuración > Ver toda la configuración > Filtros y Direcciones Bloqueadas > Crear un nuevo filtro
* Introduzca una búsqueda de categoría (ver abajo) en el campo *Tiene las palabras* y haga clic en *Crear filtro*
* Marque *Aplicar la etiqueta* y seleccione una etiqueta y haga clic en *Crear filtro*
Possible categories:
```
categoría:social
categoría:actualizaciones
categoría:foros
categoría:promociones
```
Unfortunately, this is not possible for snoozed messages folder.
You can use *Force sync* in the three-dots menu of the unified inbox to let FairEmail synchronize the folder list again and you can long press the folders to enable synchronization.
**(101) What does the blue/orange dot at the bottom of the conversations mean?**
The dot shows the relative position of the conversation in the message list. The dot will be show orange when the conversation is the first or last in the message list, else it will be blue. The dot is meant as an aid when swiping left/right to go to the previous/next conversation.
The dot is disabled by default and can be enabled with the display settings *Show relative conversation position with a dot*.
**(102) How can I enable auto rotation of images?**
Images will automatically be rotated when automatic resizing of images is enabled in the settings (enabled by default). However, automatic rotating depends on the [Exif](https://en.wikipedia.org/wiki/Exif) information to be present and to be correct, which is not always the case. Particularly not when taking a photo with a camara app from FairEmail.
Note that only [JPEG](https://en.wikipedia.org/wiki/JPEG) and [PNG](https://en.wikipedia.org/wiki/Portable_Network_Graphics) images can contain Exif information.
**(103) How can I record audio?**
You can record audio if you have a recording app installed which supports the [RECORD_SOUND_ACTION](https://developer.android.com/reference/android/provider/MediaStore.Audio.Media#RECORD_SOUND_ACTION) intent. If no supported app is installed, FairEmail will not show a record audio action/icon.
Unfortunately and surprisingly, most recording apps do not seem to support this intent (they should).
**(104) What do I need to know about error reporting?**
* Los informes de error ayudarán a mejorar FairEmail
* El reporte de errores es opcional y opt-in
* El informe de errores puede ser activado/desactivado en la configuración, sección miscelánea
* Los informes de error se enviarán automáticamente de forma anónima a [Bugsnag](https://www.bugsnag.com/)
* Bugsnag para Android es [código abierto](https://github.com/bugsnag/bugsnag-android)
* Mire [aquí](https://docs.bugsnag.com/platforms/android/automatically-captured-data/) sobre qué datos se enviarán en caso de errores
* Vea [aquí](https://docs.bugsnag.com/legal/privacy-policy/) para ver la política de privacidad de Bugsnag
* Los informes de error se enviarán a *sessions.bugsnag.com:443* y *notify.bugsnag.com:443*
**(105) How does the roam-like-at-home option work?**
FairEmail will check if the country code of the SIM card and the country code of the network are in the [EU roam-like-at-home countries](https://en.wikipedia.org/wiki/European_Union_roaming_regulations#Territorial_extent) and assumes no roaming if the country codes are equal and the advanced roam-like-at-home option is enabled.
So, you don't have to disable this option if you don't have an EU SIM or are not connected to an EU network.
**(106) Which launchers can show a badge count with the number of unread messages?**
Please [see here](https://github.com/leolin310148/ShortcutBadger#supported-launchers) for a list of launchers which can show the number of unread messages.
Note that the notification setting *Show launcher icon with number of new messages* needs to be enabled (default enabled).
Only *new* unread messages in folders set to show new message notifications will be counted, so messages marked unread again and messages in folders set to not show new message notification will not be counted.
Depending on what you want, the notification settings *Let the number of new messages match the number of notifications* needs to be enabled or disabled.
This feature depends on support of your launcher. FairEmail merely 'broadcasts' the number of unread messages using the ShortcutBadger library. If it doesn't work, this cannot be fixed by changes in FairEmail.
Algunos lanzadores muestran '1' para [la notificación de monitoreo](#user-content-faq2), a pesar de que FairEmail solicita explícitamente no mostrar una insignia para esta notificación. This could be caused by a bug in the launcher app or in your Android version. Please double check if the notification dot is disabled for the receive (service) notification channel. You can go to the right notification channel settings via the notification settings of FairEmail. This might not be obvious, but you can tap on the channel name for more settings.
Note that Tesla Unread is [not supported anymore](https://forum.xda-developers.com/android/general/bad-news-tesla-unread-devoloper-t3920415).
FairEmail does send a new message count intent as well:
```
eu.faircode.email.NEW_MESAGE_COUNT
```
The number of new, unread messages will be in an integer "*count*" parameter.
**(107) How do I use colored stars?**
You can set a colored star via the *more* message menu, via multiple selection (started by long pressing a message), by long pressing a star in a conversation or automatically by using [rules](#user-content-faq71).
You need to know that colored stars are not supported by the IMAP protocol and can therefore not be synchronized to an email server. This means that colored stars will not be visible in other email clients and will be lost on downloading messages again. However, the stars (without color) will be synchronized and will be visible in other email clients, when supported.
Some email clients use IMAP keywords for colors. However, not all servers support IMAP keywords and besides that there are no standard keywords for colors.
**~~(108) Can you add permanently delete messages from any folder?~~**
~~When you delete messages from a folder the messages will be moved to the trash folder, so you have a chance to restore the messages.~~ ~~You can permanently delete messages from the trash folder.~~ ~~Permanently delete messages from other folders would defeat the purpose of the trash folder, so this will not be added.~~
**~~(109) Why is 'select account' available in official versions only?~~**
~~Using *select account* to select and authorize Google accounts require special permission from Google for security and privacy reasons.~~ ~~This special permission can only be acquired for apps a developer manages and is responsible for.~~ ~~Third party builds, like the F-Droid builds, are managed by third parties and are the responsibility of these third parties.~~ ~~So, only these third parties can acquire the required permission from Google.~~ ~~Since these third parties do not actually support FairEmail, they are most likely not going to request the required permission.~~
~~You can solve this in two ways:~~
* ~~Cambiar a la versión oficial de FairEmail, vea [aquí](https://github.com/M66B/FairEmail/blob/master/README.md#downloads) para las opciones~~
* ~~Use contraseñas específicas de aplicación, vea [estas Preguntas Frecuentes](#user-content-faq6)~~
~~Using *select account* in third party builds is not possible in recent versions anymore.~~ ~~In older versions this was possible, but it will now result in the error *UNREGISTERED_ON_API_CONSOLE*.~~
**(110) Why are (some) messages empty and/or attachments corrupt?**
Empty messages and/or corrupt attachments are probably being caused by a bug in the server software. Older Microsoft Exchange software is known to cause this problem. Mostly you can workaround this by disabling *Partial fetch* in the advanced account settings:
Setup > Step 1 > Manage > Tap account > Tap advanced > Partial fetch > uncheck
After disabling this setting, you can use the message 'more' (three dots) menu to 'resync' empty messages. Alternatively, you can *Delete local messages* by long pressing the folder(s) in the folder list and synchronize all messages again.
Disabling *Partial fetch* will result in more memory usage.
**(111) Is OAuth supported?**
OAuth for Gmail is supported via the quick setup wizard. The Android account manager will be used to fetch and refresh OAuth tokens for selected on-device accounts. OAuth for non on-device accounts is not supported because Google requires a [yearly security audit](https://support.google.com/cloud/answer/9110914) ($15,000 to $75,000) for this.
OAuth for Yandex is supported via the quick setup wizard.
OAuth for Office 365 accounts is supported, but Microsoft does not offer OAuth for Outlook, Live and Hotmail accounts (yet?).
OAuth access for Yahoo was requested, but Yahoo never responded to the request. OAuth for AOL [was deactivated](https://www.programmableweb.com/api/aol-open-auth) by AOL. Verizon owns both AOL and Yahoo, collectively named [Oath inc](https://en.wikipedia.org/wiki/Verizon_Media). So, it is reasonable to assume that OAuth is not supported by Yahoo anymore too.
**(112) Which email provider do you recommend?**
FairEmail is an email client only, so you need to bring your own email address.
There are plenty of email providers to choose from. Which email provider is best for you depends on your wishes/requirements. Please see the websites of [Restore privacy](https://restoreprivacy.com/secure-email/) or [Privacy Tools](https://www.privacytools.io/providers/email/) for a list of privacy oriented email providers with advantages and disadvantages.
Some providers, like ProtonMail, Tutanota, use proprietary email protocols, which make it impossible to use third party email apps. Consulte [estas Preguntas Frecuentes](#user-content-faq129) para obtener más información.
Using your own (custom) domain name, which is supported by most email providers, will make it easier to switch to another email provider.
**(113) How does biometric authentication work?**
If your device has a biometric sensor, for example a fingerprint sensor, you can enable/disable biometric authentication in the navigation (hamburger) menu of the setup screen. When enabled FairEmail will require biometric authentication after a period of inactivity or after the screen has been turned off while FairEmail was running. Activity is navigation within FairEmail, for example opening a conversation thread. The inactivity period duration can be configured in the miscellaneous settings. When biometric authentication is enabled new message notifications will not show any content and FairEmail won't be visible on the Android recents screen.
Biometric authentication is meant to prevent others from seeing your messages only. FairEmail se basa en el cifrado del dispositivo para el cifrado de datos, vea también [estas Preguntas Frecuentes](#user-content-faq37).
Biometric authentication is a pro feature.
**(114) Can you add an import for the settings of other email apps?**
The format of the settings files of most other email apps is not documented, so this is difficult. Sometimes it is possible to reverse engineer the format, but as soon as the settings format changes things will break. Also, settings are often incompatible. For example, FairEmail has unlike most other email apps settings for the number of days to synchronize messages for and for the number of days to keep messages for, mainly to save on battery usage. Moreover, setting up an account/identity with the quick setup is simple, so it is not really worth the effort.
**(115) Can you add email address chips?**
Email address [chips](https://material.io/design/components/chips.html) look nice, but cannot be edited, which is quite inconvenient when you made a typo in an email address.
Note that FairEmail will select the address only when long pressing an address, which makes it easy to delete an address.
Chips are not suitable for showing in a list and since the message header in a list should look similar to the message header of the message view it is not an option to use chips for viewing messages.
Reverted [commit](https://github.com/M66B/FairEmail/commit/2c80c25b8aa75af2287f471b882ec87d5a5a5015).
**~~(116) How can I show images in messages from trusted senders by default?~~**
~~You can show images in messages from trusted senders by default by enabled the display setting *Automatically show images for known contacts*.~~
~~Contacts in the Android contacts list are considered to be known and trusted,~~ ~~unless the contact is in the group / has the label '*Untrusted*' (case insensitive).~~
**(117) Can you help me restore my purchase?**
Google manages all purchases, so as a developer I have little control over purchases. So, basically the only thing I can do, is give some advice:
* Asegúrese de tener una conexión activa a internet
* Asegúrese de que ha iniciado sesión con la cuenta de Google correcta y de que no hay ningún problema con su cuenta de Google
* Asegúrese de instalar FairEmail a través de la cuenta de Google correcta si configuró varias cuentas de Google en su dispositivo
* Asegúrese de que la aplicación Play Store está actualizada, por favor [ver aquí](https://support.google.com/googleplay/answer/1050566?hl=en)
* Abra la aplicación Play Store y espere al menos un minuto para darle tiempo para sincronizar con los servidores de Google
* Open FairEmail and navigate to the pro features screen to let FairEmail check the purchases; sometimes it help to tap the *buy* button
You can also try to clear the cache of the Play store app via the Android apps settings. Restarting the device might be necessary to let the Play store recognize the purchase correctly.
Note that:
* Si obtiene *ITEM_ALREADY_OWNED*, la aplicación Play Store probablemente necesite ser actualizada, por favor [vea aquí](https://support.google.com/googleplay/answer/1050566?hl=en)
* Las compras se almacenan en la nube de Google y no se pueden perder
* No hay límite de tiempo en las compras, por lo que no pueden expirar
* Google no expone detalles (nombre, correo electrónico, etc.) sobre los compradores a los desarrolladores
* Una aplicación como FairEmail no puede seleccionar qué cuenta de Google utilizar
* Puede tomar un tiempo hasta que la aplicación Play Store haya sincronizado una compra a otro dispositivo
* Las compras en Play Store no se pueden utilizar sin la Play Store, que tampoco está permitido por las reglas de la Play Store
If you cannot solve the problem with the purchase, you will have to contact Google about it.
**(118) What does 'Remove tracking parameters' exactly?**
Checking *Remove tracking parameters* will remove all [UTM parameters](https://en.wikipedia.org/wiki/UTM_parameters) from a link.
**~~(119) Can you add colors to the unified inbox widget?~~**
~~The widget is designed to look good on most home/launcher screens by making it monochrome and by using a half transparent background.~~ ~~This way the widget will nicely blend in, while still being properly readable.~~
~~Adding colors will cause problems with some backgrounds and will cause readability problems, which is why this won't be added.~~
Due to Android limitations it is not possible to dynamically set the opacity of the background and to have rounded corners at the same time.
**(120) Why are new message notifications not removed on opening the app?**
New message notifications will be removed on swiping notifications away or on marking the associated messages read. Opening the app will not remove new message notifications. This gives you a choice to leave new message notifications as a reminder that there are still unread messages.
On Android 7 Nougat and later new message notifications will be [grouped](https://developer.android.com/training/notify-user/group). Tapping on the summary notification will open the unified inbox. The summary notification can be expanded to view individual new message notifications. Tapping on an individual new message notification will open the conversation the message it is part of. Vea [estas Preguntas Frecuentes](#user-content-faq70) sobre cuándo los mensajes de una conversación se expandirán automáticamente y se marcarán como leídos.
**(121) How are messages grouped into a conversation?**
By default FairEmail groups messages in conversations. This can be turned of in the display settings.
FairEmail groups messages based on the standard *Message-ID*, *In-Reply-To* and *References* headers. FairEmail does not group on other criteria, like the subject, because this could result in grouping unrelated messages and would be at the expense of increased battery usage.
**~~(122) Why is the recipient name/email address show with a warning color?~~**
~~The recipient name and/or email address in the addresses section will be shown in a warning color~~ ~~when the sender domain name and the domain name of the *to* address do not match.~~ ~~Mostly this indicates that the message was received *via* an account with another email address.~~
**(123) What will happen when FairEmail cannot connect to an email server?**
When FairEmail cannot connect to an email server to receive messages, for example when the internet connection is bad or a firewall or a VPN is blocking the connection, FairEmail will wait 8, 16 and 32 seconds while keeping the device awake (=use battery power) and try again to connect. If this fails, FairEmail will schedule an alarm to retry after 15, 30 and 60 minutes and let the device sleep (=no battery usage).
Between connectivity changes there is a wait of 90 seconds to give the email server the opportunity to discover the old connection is broken. Esto es necesario porque la conexión a internet de un dispositivo móvil a menudo se pierde abruptamente y para prevenir el problema descrito en [estas Preguntas Frecuentes](#user-content-faq23).
Note that [Android doze mode](https://developer.android.com/training/monitoring-device-state/doze-standby) does not allow to wake the device earlier than after 15 minutes.
*Force sync* in the three-dots menu of the unified inbox can be used to let FairEmail attempt to reconnect without waiting.
Sending messages will be retried on connectivity changes only (reconnecting to the same network or connecting to another network) to prevent the email server from blocking the connection permanently. You can pull down the outbox to retry manually.
Note that sending will not be retried in case of authentication problems and when the server rejected the message. In this case you can open/expand the message and use the undo icon to move the message to the drafts folder, possible change it and send it again.
**(124) Why do I get 'Message too large or too complex to display'?**
The message *Message too large or too complex to display* will be shown if there are more than 100,000 characters or more than 500 links in a message. Reformatting and displaying such messages will take too long. You can try to use the original message view, powered by the browser, instead.
**(125) What are the current experimental features?**
* ...
**(126) Can message previews be sent to my wearable?**
FairEmail fetches a message in two steps:
1. Fetch message headers
1. Fetch message text and attachments
Directly after the first step new messages will be notified. However, only until after the second step the message text will be available. FairEmail updates exiting notifications with a preview of the message text, but unfortunately wearable notifications cannot be updated.
Since there is no guarantee that a message text will always be fetched directly after a message header, it is not possible to guarantee that a new message notification with a preview text will always be sent to a wearable.
If you think this is good enough, you can enable the notification option *Only send notifications with a message preview to wearables* and if this does not work, you can try to enable the notification option *Show notifications with a preview text only*. Note that this applies to wearables not showing a preview text too, even when the Android Wear app says the notification has been sent (bridged).
If you want to have the full message text sent to your wearable, you can enable the notification option *Preview all text*. Note that some wearables are known to crash with this option enabled.
If you use a Samsung wearable with the Galaxy Wearable (Samsung Gear) app, you might need to enable notifications for FairEmail when the setting *Notifications*, *Apps installed in the future* is turned off in this app.
**(127) How can I fix 'Syntactically invalid HELO argument(s)'?**
The error *... Syntactically invalid HELO argument(s) ...* means that the SMTP server rejected the local IP address or host name. You can likely fix this error by enabling or disabling the advanced indentity option *Use local IP address instead of host name*.
**(128) How can I reset asked questions, for example to show images?**
You can reset asked questions via the three dots overflow menu in the miscellaneous settings.
**(129) Are ProtonMail, Tutanota supported?**
ProtonMail uses a proprietary email protocol and [does not directly support IMAP](https://protonmail.com/support/knowledge-base/imap-smtp-and-pop3-setup/), so you cannot use FairEmail to access ProtonMail.
Tutanota uses a proprietary email protocol and [does not support IMAP](https://tutanota.com/faq/#imap), so you cannot use FairEmail to access Tutanota.
**(130) What does message error ... mean?**
A series of lines with orangish or red texts with technical information means that debug mode was enabled in the miscellaneous settings.
The warning *No server found at ...* means that there was no email server registered at the indicated domain name. Replying to the message might not be possible and might result in an error. This could indicate a falsified email address and/or spam.
The error *... ParseException ...* means that there is a problem with a received message, likely caused by a bug in the sending software. FairEmail will workaround this is in most cases, so this message can mostly be considered as a warning instead of an error.
The error *...SendFailedException...* means that there was a problem while sending a message. The error will almost always include a reason. Common reasons are that the message was too big or that one or more recipient addresses were invalid.
The warning *Message too large to fit into the available memory* means that the message was larger than 10 MiB. Even if your device has plenty of storage space Android provides limited working memory to apps, which limits the size of messages that can be handled.
Please see [here](#user-content-faq22) for other error messages in the outbox.
**(131) Can you change the direction for swiping to previous/next message?**
If you read from left to right, swiping to the left will show the next message. Similarly, if you read from right to left, swiping to the right will show the next message.
This behavior seems quite natural to me, also because it is similar to turning pages.
Anyway, there is a behavior setting to reverse the swipe direction.
**(132) Why are new message notifications silent?**
Notifications are silent by default on some MIUI versions. Please see [here](http://en.miui.com/thread-3930694-1-1.html) how you can fix this.
There is a bug in some Android versions causing [setOnlyAlertOnce](https://developer.android.com/reference/android/app/Notification.Builder#setOnlyAlertOnce(boolean)) to mute notifications. Since FairEmail shows new message notifications right after fetching the message headers and FairEmail needs to update new message notifications after fetching the message text later, this cannot be fixed or worked around by FairEmail.
Android might rate limit the notification sound, which can cause some new message notifications to be silent.
**(133) Why is ActiveSync not supported?**
The Microsoft Exchange ActiveSync protocol [is patented](https://en.wikipedia.org/wiki/Exchange_ActiveSync#Licensing) and can therefore not be supported. For this reason you won't find many, if any, other email clients supporting ActiveSync.
The Microsoft Exchange Web Services protocol [is being phased out](https://techcommunity.microsoft.com/t5/Exchange-Team-Blog/Upcoming-changes-to-Exchange-Web-Services-EWS-API-for-Office-365/ba-p/608055).
Note that the desciption of FairEmail starts with the remark that non-standard protocols, like Microsoft Exchange Web Services and Microsoft ActiveSync are not supported.
**(134) Can you add deleting local messages?**
*POP3*
In the account settings (Setup, step 1, Manage, tap account) you can enable *Leave deleted messages on server*.
*IMAP*
Since the IMAP protocol is meant to synchronize two ways, deleting a message from the device would result in fetching the message again when synchronizing again.
However, FairEmail supports hiding messages, either via the three-dots menu in the action bar just above the message text or by multiple selecting messages in the message list. Basically this is the same as "leave on server" of the POP3 protocol with the advantage that you can show the messages again when needed.
Note that it is possible to set the swipe left or right action to hide a message.
**(135) Why are trashed messages and drafts shown in conversations?**
Individual messages will rarely be trashed and mostly this happens by accident. Showing trashed messages in conversations makes it easier to find them back.
You can permanently delete a message using the message three-dots *delete* menu, which will remove the message from the conversation. Note that this irreversible.
Similarly, drafts are shown in conversations to find them back in the context where they belong. It is easy to read through the received messages before continuing to write the draft later.
**(136) How can I delete an account/identity/folder?**
Deleting an account/identity/folder is a little bit hidden to prevent accidents.
* Cuenta: Configurar > Paso 1 > Administrar > Tocar cuenta
* Identidad: Configurar > Paso 2 > Administrar > Tocar cuenta
* Carpeta: mantenga pulsada la carpeta en la lista de carpetas > Editar propiedades
In the three-dots overflow menu at the top right there is an item to delete the account/identity/folder.
**(137) How can I reset 'Don't ask again'?**
You can reset all questions set to be not asked again in the miscellaneous settings.
**(138) Can you add calendar/contact management/synchronizing?**
Calendar and contact management can better be done by a separate, specialized app. Note that FairEmail is a specialized email app, not an office suite.
Also, I prefer to do a few things very well, instead of many things only half. Moreover, from a security perspective, it is not a good idea to grant many permissions to a single app.
You are advised to use the excellent, open source [DAVx⁵](https://f-droid.org/packages/at.bitfire.davdroid/) app to synchronize/manage your calendars/contacts.
Most providers support exporting your contacts. Please [see here](https://support.google.com/contacts/answer/1069522) about how you can import contacts if synchronizing is not possible.
Note that FairEmail does support replying to calendar invites (a pro feature) and adding calendar invites to your personal calendar.
**(139) How do I fix 'User is authenticated but not connected'?**
In fact this Microsoft Exchange specific error is an incorrect error message caused by a bug in older Exchange server software.
The error *User is authenticated but not connected* might occur if:
* Los mensajes push están habilitados para demasiadas carpetas: vea [estas Preguntas Frecuentes](#user-content-faq23) para más información y una solución
* La contraseña de la cuenta fue cambiada: cambiarla en FairEmail también debería solucionar el problema
* Una dirección de correo electrónico de alias se está utilizando como nombre de usuario en lugar de la dirección de correo principal
* Se está utilizando un esquema de inicio de sesión incorrecto para un buzón compartido: el esquema correcto es *usuario@dominio\AliasBuzónCompartido*
The shared mailbox alias will mostly be the email address of the shared account, like this:
```
usted@ejemplo.com\compartido@ejemplo.com
```
Note that it should be a backslash and not a forward slash.
**(140) Why does the message text contain strange characters?**
Displaying strange characters is almost always caused by specifying no or an invalid character encoding by the sending software. FairEmail will assume [ISO 8859-1](https://en.wikipedia.org/wiki/ISO/IEC_8859-1) when no character set or when [US-ASCII](https://en.wikipedia.org/wiki/ASCII) was specified. Other than that there is no way to reliably determine the correct character encoding automatically, so this cannot be fixed by FairEmail. The right action is to complain to the sender.
**(141) How can I fix 'A drafts folder is required to send messages'?**
To store draft messages a drafts folder is required. In most cases FairEmail will automatically select the drafts folders on adding an account based on [the attributes](https://www.iana.org/assignments/imap-mailbox-name-attributes/imap-mailbox-name-attributes.xhtml) the email server sends. However, some email servers are not configured properly and do not send these attributes. In this case FairEmail tries to identify the drafts folder by name, but this might fail if the drafts folder has an unusual name or is not present at all.
You can fix this problem by manually selecting the drafts folder in the account settings (Setup, step 1, tap account, at the bottom). If there is no drafts folder at all, you can create a drafts folder by tapping on the '+' button in the folder list of the account (tap on the account name in the navigation menu).
Some providers, like Gmail, allow enabling/disabling IMAP for individual folders. So, if a folder is not visible, you might need to enable IMAP for the folder.
Quick link for Gmail: [https://mail.google.com/mail/u/0/#settings/labels](https://mail.google.com/mail/u/0/#settings/labels)
**(142) How can I store sent messages in the inbox?**
Generally, it is not a good idea to store sent messages in the inbox because this is hard to undo and could be incompatible with other email clients.
That said, FairEmail is able to properly handle sent messages in the inbox. FairEmail will mark outgoing messages with a sent messages icon for example.
The best solution would be to enable showing the sent folder in the unified inbox by long pressing the sent folder in the folder list and enabling *Show in unified inbox*. This way all messages can stay where they belong, while allowing to see both incoming and outgoing messages at one place.
Si esta no es una opción, puede [crear una regla](#user-content-faq71) para mover automáticamente los mensajes enviados a la bandeja de entrada o establecer una dirección CC/CCO predeterminada en la configuración de identidad avanzada para enviarse una copia.
**~~(143) Can you add a trash folder for POP3 accounts?~~**
[POP3](https://en.wikipedia.org/wiki/Post_Office_Protocol) is a very limited protocol. Basically only messages can be downloaded and deleted from the inbox. It is not even possible to mark a message read.
Since POP3 does not allow access to the trash folder at all, there is no way to restore trashed messages.
Note that you can hide messages and search for hidden messages, which is similar to a local trash folder, without suggesting that trashed messages can be restored, while this is actually not possible.
Version 1.1082 added a local trash folder. Note that trashing a message will permanently remove it from the server and that trashed messages cannot be restored to the server anymore.
**(144) How can I record voice notes?**
To record voice notes you can press this icon in the bottom action bar of the message composer:
This requires a compatible audio recorder app to be installed. In particular [this common intent](https://developer.android.com/reference/android/provider/MediaStore.Audio.Media.html#RECORD_SOUND_ACTION) needs to be supported.
For example [this audio recorder](https://f-droid.org/app/com.github.axet.audiorecorder) is compatible.
Voice notes will automatically be attached.
**(145) How can I set a notification sound for an account, folder or sender?**
Account:
* Habilitar *notificaciones separadas* en la configuración avanzada de la cuenta (configuración, paso 1, administrar, tocar cuenta, tocar avanzado)
* Mantenga presionada la cuenta en la lista de cuentas (Configuración, paso 1, Administrar) y seleccione *Editar canal de notificación* para cambiar el sonido de notificación
Folder:
* Mantenga pulsado la carpeta en la lista de carpetas y seleccione *Crear canal de notificación*
* Mantenga presionado la carpeta en la lista de carpetas y seleccione *Editar canal de notificación* para cambiar el sonido de notificación
Sender:
* Abra un mensaje del remitente y expándalo
* Expanda la sección de direcciones tocando en la flecha hacia abajo
* Toca el icono de la campana para crear o editar un canal de notificación y cambiar el sonido de notificación
The order of precendence is: sender sound, folder sound, account sound and default sound.
Setting a notification sound for an account, folder or sender requires Android 8 Oreo or later and is a pro feature.
**(146) How can I fix incorrect message times?**
Since the sent date/time is optional and can be manipulated by the sender, FairEmail uses the server received date/time by default.
Sometimes the server received date/time is incorrect, mostly because messages were incorrectly imported from another server and sometimes due to a bug in the email server.
In these rare cases, it is possible to let FairEmail use either the date/time from the *Date* header (sent time) or from the *Received* header as a workaround. This can be changed in the advanced account settings: Setup, step 1, Manage, tap account, tap Advanced.
This will not change the time of already synchronized messages. To solve this, long press the folder(s) in the folder list and select *Delete local messages* and *Synchronize now*.
**(147) What should I know about third party versions?**
You likely came here because you are using a third party build of FairEmail.
There is **only support** on the latest Play store version, the latest GitHub release and the F-Droid build, but **only if** the version number of the F-Droid build is the same as the version number of the latest GitHub release.
F-Droid builds irregularly, which can be problematic when there is an important update. Therefore you are advised to switch to the GitHub release.
The F-Droid version is built from the same source code, but signed differently. This means that all features are available in the F-Droid version too, except for using the Gmail quick setup wizard because Google approved (and allows) one app signature only. For all other email providers, OAuth access is only available in Play Store versions and Github releases, as the email providers only permit the use of OAuth for official builds.
Note that you'll need to uninstall the F-Droid build first before you can install a GitHub release because Android refuses to install the same app with a different signature for security reasons.
Note that the GitHub version will automatically check for updates. When desired, this can be turned off in the miscellaneous settings.
Please [see here](https://github.com/M66B/FairEmail/blob/master/README.md#user-content-downloads) for all download options.
If you have a problem with the F-Droid build, please check if there is a newer GitHub version first.
**(148) How can I use an Apple iCloud account?**
There is a built-in profile for Apple iCloud, but if needed you can find the right settings [here](https://support.apple.com/en-us/HT202304).
When using two-factor authentication you might need to use an [app-specific password](https://support.apple.com/en-us/HT204397).
**(149) How does the unread message count widget work?**
The unread message count widget shows the number of unread messages either for all accounts or for a selected account, but only for the folders for which new message notifications are enabled.
Tapping on the notification will synchronize all folders for which synchronization is enabled and will open:
* la pantalla de inicio cuando todas las cuentas fueron seleccionadas
* una lista de carpetas cuando una cuenta específica fue seleccionada y cuando las notificaciones de mensajes nuevos están habilitadas para múltiples carpetas
* una lista de mensajes cuando una cuenta específica fue seleccionada y cuando las notificaciones de mensajes nuevos están habilitadas para una carpeta
**(150) Can you add cancelling calendar invites?**
Cancelling calendar invites (removing calendar events) requires write calendar permission, which will result in effectively granting permission to read and write *all* calendar events of *all* calendars.
Given the goal of FairEmail, privacy and security, and given that it is easy to remove a calendar event manually, it is not a good idea to request this permission for just this reason.
Inserting new calendar events can be done without permissions with special [intents](https://developer.android.com/guide/topics/providers/calendar-provider.html#intents). Unfortunately, there exists no intent to delete existing calendar events.
**(151) Can you add backup/restore of messages?**
An email client is meant to read and write messages, not to backup and restore messages. Note that breaking or losing your device, means losing your messages!
Instead, the email provider/server is responsible for backups.
If you want to make a backup yourself, you could use a tool like [imapsync](https://imapsync.lamiral.info/).
If you want to import an mbox file to an existing email account, you can use Thunderbird on a desktop computer and the [ImportExportTools](https://addons.thunderbird.net/nl/thunderbird/addon/importexporttools/) add-on.
**(152) How can I insert a contact group?**
You can insert the email addresses of all contacts in a contact group via the three dots menu of the message composer.
You can define contact groups with the Android contacts app, please see [here](https://support.google.com/contacts/answer/30970) for instructions.
**(153) Why does permanently deleting Gmail message not work?**
You might need to change [the Gmail IMAP settings](https://mail.google.com/mail/u/0/#settings/fwdandpop) on a desktop browser to make it work:
* Cuando marco un mensaje en IMAP como eliminado: Auto-Expunge off - Espere a que el cliente actualice el servidor.
* Cuando un mensaje está marcado como borrado y eliminado de la última carpeta IMAP visible: Borrar el mensaje inmediatamente para siempre
Note that archived messages can be deleted only by moving them to the trash folder first.
Some background: Gmail seems to have an additional message view for IMAP, which can be different from the main message view.
**~~(154) Can you add favicons as contact photos?~~**
~~Besides that a [favicon](https://en.wikipedia.org/wiki/Favicon) might be shared by many email addresses with the same domain name~~ ~~and therefore is not directly related to an email address, favicons can be used to track you.~~
**(155) What is a winmail.dat file?**
A *winmail.dat* file is sent by an incorrectly configured Outlook client. It is a Microsoft specific file format ([TNEF](https://en.wikipedia.org/wiki/Transport_Neutral_Encapsulation_Format)) containing a message and possibly attachments.
You can find some more information about this file [here](https://support.mozilla.org/en-US/kb/what-winmaildat-attachment).
You can view it with for example the Android app [Letter Opener](https://play.google.com/store/apps/details?id=app.letteropener).
**(156) How can I set up an Office 365 account?**
An Office 365 account can be set up via the quick setup wizard and selecting *Office 365 (OAuth)*.
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
**(157) How can I set up an Free.fr account?**
Veuillez [voir ici](https://free.fr/assistance/597.html) pour les instructions.
**SMTP est désactivé par défaut**, veuillez [voir ici](https://free.fr/assistance/2406.html) comment il peut être activé.
Veuillez [voir ici](http://jc.etiemble.free.fr/abc/index.php/trucs-astuces/configurer-smtp-free-fr) pour un guide détaillé.
**(158) Which camera / audio recorder do you recommend?**
To take photos and to record audio a camera and an audio recorder app are needed. The following apps are open source cameras and audio recorders:
* [Open Camera](https://play.google.com/store/apps/details?id=net.sourceforge.opencamera) ([F-Droid](https://f-droid.org/en/packages/net.sourceforge.opencamera/))
* [Audio Recorder](https://play.google.com/store/apps/details?id=com.github.axet.audiorecorder) ([F-Droid](https://f-droid.org/packages/com.github.axet.audiorecorder/))
To record voice notes, etc, the audio recorder needs to support [MediaStore.Audio.Media.RECORD_SOUND_ACTION](https://developer.android.com/reference/android/provider/MediaStore.Audio.Media#RECORD_SOUND_ACTION). Oddly, most audio recorders seem not to support this standard Android action.
**(159) What are Disconnect's tracker protection lists?**
Please see [here](https://disconnect.me/trackerprotection) for more information about Disconnect's tracker protection lists.
After downloading the lists in the privacy settings, the lists can optionally be used:
* para avisar sobre el enlaces de seguimiento al abrir enlaces
* para reconocer imágenes de seguimiento en los mensajes
Tracking images will be disabled only if the corresponding main 'disable' option is enabled.
Tracking images will not be recognized when the domain is classified as '*Content*', see [here](https://disconnect.me/trackerprotection#trackers-we-dont-block) for more information.
This command can be sent to FairEmail from an automation app to update the protection lists:
```
(adb shell) am startservice -a eu.faircode.email.DISCONNECT.ME
```
Updating once a week will probably be sufficient, please see [here](https://github.com/disconnectme/disconnect-tracking-protection/commits/master) for recent lists changes.
**(160) Can you add permanent deletion of messages without confirmation?**
Permanent deletion means that messages will *irreversibly* be lost, and to prevent this from happening accidentally, this always needs to be confirmed. Even with a confirmation, some very angry people who lost some of their messages through their own fault contacted me, which was a rather unpleasant experience :-(
**(161) Can you add a setting to change the primary and accent color?***
If I could, I would add a setting to select the primary and accent color right away, but unfortunately Android themes are fixed, see for example [here](https://stackoverflow.com/a/26511725/1794097), so this is not possible.
## Get support
FairEmail is supported on smartphones, tablets and ChromeOS only.
Only the latest Play store version and latest GitHub release are supported. The F-Droid build is supported only if the version number is the same as the version number of the latest GitHub release. This also means that downgrading is not supported.
There is no support on things that are not directly related to FairEmail.
There is no support on building and developing things by yourself.
Requested features should:
* ser útiles para la mayoría de la gente
* no complicar el uso de FairEmail
* encajar dentro de la filosofía de FairEmail (orientado a la privacidad, pensando en seguridad)
* cumplir con estándares comunes (IMAP, SMTP, etc.)
Features not fulfilling these requirements will likely be rejected. This is also to keep maintenance and support in the long term feasible.
If you have a question, want to request a feature or report a bug, please use [this form](https://contact.faircode.eu/?product=fairemailsupport).
GitHub issues are disabled due to frequent misusage.
Copyright © 2018-2020 Marcel Bokhorst.