diff --git a/app/src/main/res/values-cs-rCZ/strings.xml b/app/src/main/res/values-cs-rCZ/strings.xml
index 3e54e0e8f0..19ef60a154 100644
--- a/app/src/main/res/values-cs-rCZ/strings.xml
+++ b/app/src/main/res/values-cs-rCZ/strings.xml
@@ -110,8 +110,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
+ %1$s > %2$s
+ %2$s < %1$s
%1$s: %2$s
%1$d minut
Ukončit
@@ -515,6 +515,7 @@
Oznámení nových zpráv budou při odtažení prstem a při označení zpráv jako přečtených odebrána vždy
Pro nastavení vlastností kanálu se dotkněte jeho názvu
Pro nastavení výchozího zvuku, apod
+ Pro vypnutí oznámení o „monitorování“
Pro nositelná zařízení umějící zobrazit celý text (až 5,000 znaků)
Pozdrží zobrazení oznámení, dokud není stažen text zprávy
Oznámení jsou do nositelného zařízení odeslány teprve po stažení textu zprávy
diff --git a/app/src/main/res/values-da-rDK/strings.xml b/app/src/main/res/values-da-rDK/strings.xml
index a5bf164c71..004fd9f208 100644
--- a/app/src/main/res/values-da-rDK/strings.xml
+++ b/app/src/main/res/values-da-rDK/strings.xml
@@ -88,6 +88,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
+ %1$s > %2$s
+ %2$s < %1$s
%1$s: %2$s
%1$d minutter
Afslut
diff --git a/app/src/main/res/values-de-rAT/strings.xml b/app/src/main/res/values-de-rAT/strings.xml
index 1df1cbba66..511248b594 100644
--- a/app/src/main/res/values-de-rAT/strings.xml
+++ b/app/src/main/res/values-de-rAT/strings.xml
@@ -89,8 +89,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ⮞ %2$s
- %2$s ⮜ %1$s
+ %1$s → %2$s
+ %2$s ← %1$s
%1$s: %2$s
%1$d Minuten
Beenden
@@ -448,7 +448,7 @@ Protokolle, die dem Standard nicht entsprechen, wie „Microsoft Exchange Web Se
Wenn der Nachrichtenempfang deaktiviert ist, ist es immer noch möglich, Nachrichten manuell zu empfangen, indem Sie die Nachrichtenliste nach unten ziehen
Bei der regelmäßigen Überprüfung auf neue Nachrichten werden jedes Mal lokale und entfernte Nachrichten verglichen, was ein aufwendiger Vorgang ist, der zu einem zusätzlichen Akkuverbrauch führen kann, insbesondere wenn viele Nachrichten vorhanden sind. Nachrichten immer empfangen verhindert das durch fortlaufendes Verfolgen von Änderungen.
Das kann die Synchronisierungsfrequenz ändern, um den Akkuverbrauch zu verringern, abhängig von den Fähigkeiten und dem Verhalten des E-Mail-Servers.
- Tippe auf eine Zeit, um eine Zeit zu setzen
+ Auf eine Zeit tippen, um eine Zeit festzulegen
Einige Anbieter speichern Nachrichten mit einem unbekannten, ungültigen oder zukünftigen Datum als Nachrichten ohne Datum
Einige Anbieter unterstützen dies nicht richtig, was möglicherweise zu einer Synchronisierung von keiner oder allen Nachrichten führen kann
Wenn deaktiviert, bleiben ungelesene Nachrichten dauerhaft auf dem Gerät erhalten
@@ -492,9 +492,9 @@ Protokolle, die dem Standard nicht entsprechen, wie „Microsoft Exchange Web Se
Nur verfügbar auf unterstützten Launchern
Es werden maximal drei Aktionen angezeigt
Benachrichtigung über neue Nachrichten werden immer entfernt, wenn sie weggewischt werden oder wenn Nachrichten als gelesen markiert werden
- Tippen Sie auf den Kanalnamen, um die Kanaleigenschaften zu setzen
- Um den Standard-Ton einzustellen etc.
- So deaktivieren Sie die Überwachungs-Benachrichtigung
+ Auf den Kanalnamen tippen, um die Kanaleigenschaften festzulegen
+ Zum Einzustellen des Standardtons usw.
+ Zum Deaktivieren der Benachrichtigung für die App-Überwachung
Für Wearables, die den kompletten Text anzeigen können (bis zu 5.000 Zeichen)
Dadurch wird die Anzeige der Benachrichtigungen verzögert, bis der Nachrichtentext heruntergeladen wurde.
Benachrichtigungen werden nur nach dem Download des Nachrichtentextes an einen tragbaren Empfänger gesendet
@@ -898,7 +898,7 @@ Protokolle, die dem Standard nicht entsprechen, wie „Microsoft Exchange Web Se
Überprüfen Sie die Signatur, um den Nachrichtentext anzuzeigen
Nachricht ist nicht signiert oder verschlüsselt
Kein Signaturschlüssel ausgewählt
- Sign-Schlüssel zurücksetzen
+ Signaturschlüssel zurücksetzen
Unsignierte Nachricht
Gültige Nachrichtensignatur
Nachrichtensignatur gültig: %1$s
diff --git a/app/src/main/res/values-de-rDE/strings.xml b/app/src/main/res/values-de-rDE/strings.xml
index 1df1cbba66..511248b594 100644
--- a/app/src/main/res/values-de-rDE/strings.xml
+++ b/app/src/main/res/values-de-rDE/strings.xml
@@ -89,8 +89,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ⮞ %2$s
- %2$s ⮜ %1$s
+ %1$s → %2$s
+ %2$s ← %1$s
%1$s: %2$s
%1$d Minuten
Beenden
@@ -448,7 +448,7 @@ Protokolle, die dem Standard nicht entsprechen, wie „Microsoft Exchange Web Se
Wenn der Nachrichtenempfang deaktiviert ist, ist es immer noch möglich, Nachrichten manuell zu empfangen, indem Sie die Nachrichtenliste nach unten ziehen
Bei der regelmäßigen Überprüfung auf neue Nachrichten werden jedes Mal lokale und entfernte Nachrichten verglichen, was ein aufwendiger Vorgang ist, der zu einem zusätzlichen Akkuverbrauch führen kann, insbesondere wenn viele Nachrichten vorhanden sind. Nachrichten immer empfangen verhindert das durch fortlaufendes Verfolgen von Änderungen.
Das kann die Synchronisierungsfrequenz ändern, um den Akkuverbrauch zu verringern, abhängig von den Fähigkeiten und dem Verhalten des E-Mail-Servers.
- Tippe auf eine Zeit, um eine Zeit zu setzen
+ Auf eine Zeit tippen, um eine Zeit festzulegen
Einige Anbieter speichern Nachrichten mit einem unbekannten, ungültigen oder zukünftigen Datum als Nachrichten ohne Datum
Einige Anbieter unterstützen dies nicht richtig, was möglicherweise zu einer Synchronisierung von keiner oder allen Nachrichten führen kann
Wenn deaktiviert, bleiben ungelesene Nachrichten dauerhaft auf dem Gerät erhalten
@@ -492,9 +492,9 @@ Protokolle, die dem Standard nicht entsprechen, wie „Microsoft Exchange Web Se
Nur verfügbar auf unterstützten Launchern
Es werden maximal drei Aktionen angezeigt
Benachrichtigung über neue Nachrichten werden immer entfernt, wenn sie weggewischt werden oder wenn Nachrichten als gelesen markiert werden
- Tippen Sie auf den Kanalnamen, um die Kanaleigenschaften zu setzen
- Um den Standard-Ton einzustellen etc.
- So deaktivieren Sie die Überwachungs-Benachrichtigung
+ Auf den Kanalnamen tippen, um die Kanaleigenschaften festzulegen
+ Zum Einzustellen des Standardtons usw.
+ Zum Deaktivieren der Benachrichtigung für die App-Überwachung
Für Wearables, die den kompletten Text anzeigen können (bis zu 5.000 Zeichen)
Dadurch wird die Anzeige der Benachrichtigungen verzögert, bis der Nachrichtentext heruntergeladen wurde.
Benachrichtigungen werden nur nach dem Download des Nachrichtentextes an einen tragbaren Empfänger gesendet
@@ -898,7 +898,7 @@ Protokolle, die dem Standard nicht entsprechen, wie „Microsoft Exchange Web Se
Überprüfen Sie die Signatur, um den Nachrichtentext anzuzeigen
Nachricht ist nicht signiert oder verschlüsselt
Kein Signaturschlüssel ausgewählt
- Sign-Schlüssel zurücksetzen
+ Signaturschlüssel zurücksetzen
Unsignierte Nachricht
Gültige Nachrichtensignatur
Nachrichtensignatur gültig: %1$s
diff --git a/app/src/main/res/values-de-rLI/strings.xml b/app/src/main/res/values-de-rLI/strings.xml
index 1df1cbba66..511248b594 100644
--- a/app/src/main/res/values-de-rLI/strings.xml
+++ b/app/src/main/res/values-de-rLI/strings.xml
@@ -89,8 +89,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ⮞ %2$s
- %2$s ⮜ %1$s
+ %1$s → %2$s
+ %2$s ← %1$s
%1$s: %2$s
%1$d Minuten
Beenden
@@ -448,7 +448,7 @@ Protokolle, die dem Standard nicht entsprechen, wie „Microsoft Exchange Web Se
Wenn der Nachrichtenempfang deaktiviert ist, ist es immer noch möglich, Nachrichten manuell zu empfangen, indem Sie die Nachrichtenliste nach unten ziehen
Bei der regelmäßigen Überprüfung auf neue Nachrichten werden jedes Mal lokale und entfernte Nachrichten verglichen, was ein aufwendiger Vorgang ist, der zu einem zusätzlichen Akkuverbrauch führen kann, insbesondere wenn viele Nachrichten vorhanden sind. Nachrichten immer empfangen verhindert das durch fortlaufendes Verfolgen von Änderungen.
Das kann die Synchronisierungsfrequenz ändern, um den Akkuverbrauch zu verringern, abhängig von den Fähigkeiten und dem Verhalten des E-Mail-Servers.
- Tippe auf eine Zeit, um eine Zeit zu setzen
+ Auf eine Zeit tippen, um eine Zeit festzulegen
Einige Anbieter speichern Nachrichten mit einem unbekannten, ungültigen oder zukünftigen Datum als Nachrichten ohne Datum
Einige Anbieter unterstützen dies nicht richtig, was möglicherweise zu einer Synchronisierung von keiner oder allen Nachrichten führen kann
Wenn deaktiviert, bleiben ungelesene Nachrichten dauerhaft auf dem Gerät erhalten
@@ -492,9 +492,9 @@ Protokolle, die dem Standard nicht entsprechen, wie „Microsoft Exchange Web Se
Nur verfügbar auf unterstützten Launchern
Es werden maximal drei Aktionen angezeigt
Benachrichtigung über neue Nachrichten werden immer entfernt, wenn sie weggewischt werden oder wenn Nachrichten als gelesen markiert werden
- Tippen Sie auf den Kanalnamen, um die Kanaleigenschaften zu setzen
- Um den Standard-Ton einzustellen etc.
- So deaktivieren Sie die Überwachungs-Benachrichtigung
+ Auf den Kanalnamen tippen, um die Kanaleigenschaften festzulegen
+ Zum Einzustellen des Standardtons usw.
+ Zum Deaktivieren der Benachrichtigung für die App-Überwachung
Für Wearables, die den kompletten Text anzeigen können (bis zu 5.000 Zeichen)
Dadurch wird die Anzeige der Benachrichtigungen verzögert, bis der Nachrichtentext heruntergeladen wurde.
Benachrichtigungen werden nur nach dem Download des Nachrichtentextes an einen tragbaren Empfänger gesendet
@@ -898,7 +898,7 @@ Protokolle, die dem Standard nicht entsprechen, wie „Microsoft Exchange Web Se
Überprüfen Sie die Signatur, um den Nachrichtentext anzuzeigen
Nachricht ist nicht signiert oder verschlüsselt
Kein Signaturschlüssel ausgewählt
- Sign-Schlüssel zurücksetzen
+ Signaturschlüssel zurücksetzen
Unsignierte Nachricht
Gültige Nachrichtensignatur
Nachrichtensignatur gültig: %1$s
diff --git a/app/src/main/res/values-el-rGR/strings.xml b/app/src/main/res/values-el-rGR/strings.xml
index 0cb82c0d75..697a8c31bd 100644
--- a/app/src/main/res/values-el-rGR/strings.xml
+++ b/app/src/main/res/values-el-rGR/strings.xml
@@ -88,8 +88,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
+ %1$s>%2$s
+ %2$s<%1$s
%1$s: %2$s
%1$d λεπτά
Έξοδος
diff --git a/app/src/main/res/values-es-rES/strings.xml b/app/src/main/res/values-es-rES/strings.xml
index 82976732e4..43dce0ee43 100644
--- a/app/src/main/res/values-es-rES/strings.xml
+++ b/app/src/main/res/values-es-rES/strings.xml
@@ -88,8 +88,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
+ %1$s > %2$s
+ %2$s < %1$s
%1$s: %2$s
%1$d minutos
Salir
diff --git a/app/src/main/res/values-fi-rFI/strings.xml b/app/src/main/res/values-fi-rFI/strings.xml
index 4358a1b1b9..4e9245951d 100644
--- a/app/src/main/res/values-fi-rFI/strings.xml
+++ b/app/src/main/res/values-fi-rFI/strings.xml
@@ -250,6 +250,7 @@
Järjestä ehdotetut osoitteet käytetyimmät ensin
Oletuskirjasin
Lisää aiheeseen etuliite vain kerran vastatessa ja edelleenlähetettäessä
+ Lisää vaakaviiva ennen vastaus-/edelleenlähetystunnistetietoja
Käytä laajennettuja tunnistetietoja vastauksessa/edelleenlähetettäessä
Lainaa vastattu teksti
Muuta vastatun tekstin kuvien koot
@@ -308,6 +309,7 @@
Näytä aihe lähettäjän yläpuolella
Näytä aihe kursiivilla
Lyhennä tarvittaessa viestin aihetta
+ Korostusväri
Näytä avainsanat viestin tunnistetiedoissa
Näytä Gmail-tunnisteet viestin tunnistetiedoissa
Näytä tähdet
@@ -421,6 +423,8 @@
Tunnista tekstin kieli
Rakenna haun indeksi
%1$d / %2$d viestiä indeksoitu (%3$s)
+ Kieli
+ Järjestelmä
Tarkista toistuvasti, että FairEmail on edelleen aktiivinen
Optimoi automaattisesti
Päivitysten tarkastus
@@ -462,6 +466,7 @@
Viestit ryhmitellään päivämäärän mukaan vain, jos ne on lajiteltu ajan mukaan
Tämän toimivuus riippuu Android-versiosta ja -muunnelmasta
Ryhmittele toisiinsa liittyvät viestit
+ Teeman korostusväriä käytetään korostamiseen
Mahdollinen uhka yksityisyydelle
Vain saatavilla olevat nimet näytetään, kun pois käytöstä
Saatavilla vain, kun viestin teksti on ladattu
@@ -482,6 +487,7 @@
Ilmoitukset uusista viesteistä poistetaan aina pyyhkäisemällä tai merkitsemällä viestit luetuiksi
Napauta kanavan nimeä asettaaksesi sen ominaisuudet
Oletusäänten jne. asettamiseksi
+ Seurantailmoituksen käytöstä poistamiseksi
Puettaville laitteille, jotka voivat näyttää koko tekstin (5 000 merkkiin asti)
Tämä viivästää ilmoitusten näyttämistä kunnes viestin teksti on ladattu
Ilmoitukset lähetetään puettavaan laitteeseen vasta, kun viestin teksti on ladattu
@@ -598,6 +604,7 @@
Selaa palvelimella olevia viestejä
Merkitse viestit luetuiksi laajennettaessa
Synkronoi nyt
+ Synkronoi alikansiot
Synkronoi lisää viestejä
Synkronoi
Poista paikalliset viestit
diff --git a/app/src/main/res/values-fr-rCA/strings.xml b/app/src/main/res/values-fr-rCA/strings.xml
index ed524bcd5d..2e681b2e57 100644
--- a/app/src/main/res/values-fr-rCA/strings.xml
+++ b/app/src/main/res/values-fr-rCA/strings.xml
@@ -88,8 +88,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
+ %1$s > %2$s
+ %2$s < %1$s
%1$s : %2$s
%1$d minutes
Quitter
diff --git a/app/src/main/res/values-fr-rFR/strings.xml b/app/src/main/res/values-fr-rFR/strings.xml
index 0aa31eb681..8e52589fd9 100644
--- a/app/src/main/res/values-fr-rFR/strings.xml
+++ b/app/src/main/res/values-fr-rFR/strings.xml
@@ -88,8 +88,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ➤ %2$s
- %2$s ◀ %1$s
+ %1$s > %2$s
+ %2$s < %1$s
%1$s : %2$s
%1$d minutes
Sortir
diff --git a/app/src/main/res/values-it-rIT/strings.xml b/app/src/main/res/values-it-rIT/strings.xml
index eb7d7968ed..bd514a98b9 100644
--- a/app/src/main/res/values-it-rIT/strings.xml
+++ b/app/src/main/res/values-it-rIT/strings.xml
@@ -88,8 +88,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
+ %1$s > %2$s
+ %2$s < %1$s
%1$s: %2$s
%1$d minuti
Esci
@@ -879,7 +879,6 @@
Il messaggio è vuoto
allegato,allegato,allegati,inclusi
Intende aggiungere un allegato?
- Tutta la formattazione sarà persa
Messaggio (%1$s) più grande del limite del server (%2$s)
Non tutti gli allegati sono stati scaricati
Questa finestra di dialogo può essere riattivata tramite il menu a tre puntini nella barra di azione superiore
diff --git a/app/src/main/res/values-ja-rJP/strings.xml b/app/src/main/res/values-ja-rJP/strings.xml
index 77918d3732..0d29e10c5a 100644
--- a/app/src/main/res/values-ja-rJP/strings.xml
+++ b/app/src/main/res/values-ja-rJP/strings.xml
@@ -6,6 +6,8 @@
例えば常に安全でない要素を削除し読みやすさを向上させるために再フォーマットされ、リンクを開くには安全の為に確認する必要があります
Androidのバグによりクラッシュが発生する為、このデバイスではFairEmailはサポートされていません
もう一度押すと終了します
+ 空き容量が足りません
+ 受信
送信
通知
更新
@@ -36,7 +38,7 @@
- %1$d 件の新しいメッセージ
- - %1$d 送信されるメッセージ
+ - %1$d 件のメッセージを送信中
- %1$d 新しい
@@ -44,6 +46,9 @@
- 会話 %1$d を選択
+
+ - %1$d 件のメッセージを移動しますか？
+
- %1$d メッセージを完全に削除しますか？
@@ -51,6 +56,7 @@
- %1$d メッセージを迷惑メールとして扱いますか？
%1$s からのメッセージを迷惑メールとして扱いますか？
+ 迷惑メールの振り分けはメールプロバイダが行うものです。メールクライアントは正しく迷惑メールを区別するために必要な情報を取得することができません。
ブロック %1$s
送信者をブロック
送信者ドメインをブロック
@@ -64,6 +70,7 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
+ %1$s: %2$s
%1$d 分
終了
テンプレート
@@ -104,12 +111,15 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
メッセージを送信する為のSMTPサーバ
ウィザード
インストールウィザードを複数回使用し複数アカウントをセットアップ出来ます
+ 新しいメールアドレスを取得したい
受信トレイに戻る
他のプロバイダー
Androidがアプリの署名をチェックする為、Googleアカウントの承認は公式バージョンでのみ機能します
アカウントを選択してアクセス許可を与えて下さい
Googleは全てのメールの読み取り、作成、送信、完全削除の許可を求めます。FairEmailは明示的な同意なしにメッセージを削除する事は有りません
IMAPで下書きフォルダにアクセス出来ない場合、Gmailラベル設定で修正出来ます
+ MicrosoftはOutlook・Live・Hotmailなどのアカウントに対してOAuthによるログインを提供していません。
+ 「AUTHENTICATE failed」というエラーは、システム管理者によってIMAP/SMTPが無効にされているときに発生する可能性があります
%1$s アカウントへのアクセスを許可します
許可
アカウントの選択
@@ -118,6 +128,8 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
メールプロバイダーから提供された設定を使用しセットアップ手順1及び2でアカウントとIDをセットアップして下さい
メールアドレスとパスワードを再確認しアカウントで外部アクセス(IMAP/SMTP)が有効になっている事を確認して下さい
このプロバイダーにはアカウントのパスワードで無くアプリのパスワードが必要です。プロバイダーの指示を確認して下さい
+ 受信トレイが見つかりません
+ 強度な保護機能を利用している場合、サードパーティのメールクライアントを使用することはできません。これはGoogleによって課せられている制限です。
アカウントとユーザ情報が正常に追加されました
以下のアカウントとユーザ情報設定してみて下さい
管理する
@@ -129,13 +141,16 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
IDのセットアップ
メールを送信
名前、色、署名などを変更
+ IDとは？
アクセス許可を付与
連絡先情報にアクセスします(オプション)
電池の最適化セットアップ
+ 確実にメールを受け取るために必要です
次のダイアログで上部の\"全てのアプリ\"を選び、FairEmailを選択し\"最適化しない\"を選んで完了します
電池消費量が多いですか？
同期が停止しましたか？
データセーバーが有効になっています
+ 上級者向けオプションを表示
メッセージへ移動
移動
タスク
@@ -168,7 +183,9 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
レッド/グリーン
グレイ
ブラック
+ ブラック/ホワイト
色を反転
+ ライト
ダーク
システム設定に従う
ブラック背景
@@ -190,6 +207,7 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
暗号化
通知
その他
+ すべてのアカウントのメッセージを受信する
同期
スケジュール
詳細
@@ -215,7 +233,7 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
署名の場所
デフォルトでプレーンテキストのみを送信
プレーンテキストの \'フォーマットフロー\'
- 受取をリクエストする時
+ 要求する確認メッセージの種類
署名の区切
認識された署名を削除
リマインダーを表示
@@ -421,7 +439,7 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
送信者アドレスの編集を許可
受信メールアドレスのユーザー名に一致する正規表現
返信先アドレス
- 既定で送信/開封確認メッセージを要求
+ 常に配信確認・開封確認メッセージを要求
\"無効な挨拶\" \"有効なアドレスが必要\"などのエラーが発生した場合は、この設定を変更してみてください
オプション
おすすめ
@@ -615,8 +633,8 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
テンプレートで返信
開く
%1$sの認証に失敗しました
- 受取を読む:%1$s
- この開封確認メッセージはメッセージが表示された事を確認するだけです。受信者がメッセージの内容を読んだという保証は有りません
+ 開封確認: %1$s
+ この開封確認メッセージはメッセージが表示されたことをお知らせするものです。受信者がメッセージの内容を読んだという保証はありません
返信テンプレートが定義されていません
%1$s で利用出来るビューアアプリは有りません
適切なオーディオレコーダーアプリが有りません
@@ -714,8 +732,8 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
秘密鍵が無効です
秘密キーがどの暗号化キーとも一致しません
プレーンテキストのみ
- 受取をリクエストする
- 殆どのプロバイダーと電子メールクライアントは受信要求を無視します
+ 開封確認メッセージを要求する
+ 殆どのプロバイダーと電子メールクライアントは開封確認メッセージの要求を無視します
送信者がいません
ユーザー名が有りません
受信者がいません
@@ -798,7 +816,7 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
非表示
古い順から
除外する
- 読む
+ 既読
スター無し
不明な送信者
非表示
@@ -919,7 +937,7 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
回答済み
転送済み
プレーンテキストのみ
- 受取がリクエストされました
+ 開封確認メッセージが要求されました
添付有り
お気に入り
連絡先を管理する
@@ -1066,7 +1084,7 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
半透明の背景
折りたたんだ
拡大
- 読む
+ 既読
未読
- %1$d メッセージ
@@ -1183,9 +1201,9 @@ Microsoft Exchange WebサービスやMicrosoft ActiveSyncなどの非標準プ
- 大
- - 受取を読む
- - 送達通知
- - 読み取り+配信確認
+ - 開封確認のみ
+ - 配信確認のみ
+ - 開封確認 + 配信確認
- テキスト上
diff --git a/app/src/main/res/values-pl-rPL/strings.xml b/app/src/main/res/values-pl-rPL/strings.xml
index ab1db65d22..310470371d 100644
--- a/app/src/main/res/values-pl-rPL/strings.xml
+++ b/app/src/main/res/values-pl-rPL/strings.xml
@@ -109,8 +109,6 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
%1$s: %2$s
%1$d minut
Wyjście
@@ -900,7 +898,6 @@
Wiadomość jest pusta
załączony, załącznik, załączniki, w zestawie, w załączonym
Czy zamierzałeś dodać załącznik?
- Całe formatowanie tekstu zostanie utracone
Wiadomość (%1$s) większa niż limit serwera (%2$s)
Nie wszystkie załączniki zostały pobrane
To okno dialogowe można ponownie włączyć za pomocą menu z trzema kropkami na górnym pasku akcji
diff --git a/app/src/main/res/values-pt-rBR/strings.xml b/app/src/main/res/values-pt-rBR/strings.xml
index a5f3a48e1b..7a6366320e 100644
--- a/app/src/main/res/values-pt-rBR/strings.xml
+++ b/app/src/main/res/values-pt-rBR/strings.xml
@@ -138,6 +138,7 @@
Por favor, conceda permissão para selecionar uma conta e ler seu nome
Google pedirá permissão para ler, compor, enviar e excluir permanentemente todo seu e-mail. O FairEmail nunca apagará suas mensagens sem o seu consentimento explícito.
Se a pasta rascunho não estiver acessível pelo IMAP, ela pode ser fixa nas configurações de etiqueta do Gmail
+ A Microsoft não fornece este tipo de autorização para o Outlook, Live, Hotmail e etc
O erro \'Falha de Autenticação\' pode ser causadado por desativação do IMAP/SMTP pelo administrador do sistema
Autorizar acesso à sua conta %1$s
Autorizar
@@ -205,6 +206,7 @@
Preto
Preto e branco
Inverter cores
+ Claro
Escuro
Seguir o sistema
Fundo preto
@@ -309,6 +311,7 @@
Mostrar assunto acima do remetente
Mostrar assunto em itálico
Quando necessário, encurte o assunto
+ Cor de destaque
Mostrar palavras-chave no cabeçalho da mensagem
Mostrar rótulos do Gmail no cabeçalho da mensagem
Mostrar estrelas
@@ -422,6 +425,8 @@
Detectar idioma do texto da mensagem
Construir índice de busca
%1$d / %2$d mensagens indexadas (%3$s)
+ Idioma
+ Sistema
Verifique periodicamente se o FairEmail ainda está ativo
Otimizar automaticamente
Procurar por atualizações
@@ -458,6 +463,7 @@
Obter mais mensagens ao rolar para baixo
Mudar para um layout mais compacto e alterar o tamanho do texto da mensagem pode ser feito no menu da barra de ação superior na exibição de mensagem
Pressione qualquer pasta da lista de pastas para adicioná-la ou removê-la da lista de pastas unificadas
+ Apenas temas claros
As mensagens são agrupadas apenas por data se forem ordenadas por tempo
Se isso funciona depende da versão e variante do Android
Agrupe as mensagens relacionadas entre si
diff --git a/app/src/main/res/values-ro-rRO/strings.xml b/app/src/main/res/values-ro-rRO/strings.xml
index 0d69b2ce14..c552d7656f 100644
--- a/app/src/main/res/values-ro-rRO/strings.xml
+++ b/app/src/main/res/values-ro-rRO/strings.xml
@@ -99,8 +99,6 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
%1$s: %2$s
%1$d minute
Ieșire
@@ -889,7 +887,6 @@
Mesajul este gol
atasez,atasat,atasate,atsament,atașez,atașat,atașament
Ați intenționat să adăugați un atașament?
- Toate formatările vor fi pierdute
Mesajul (%1$s) mai mare decât limita serverului (%2$s)
Nu toate ataşamentele se descarcă
Această fereastră de dialog poate fi activată din nou în meniul cu trei puncte din bara de acțiuni de sus
diff --git a/app/src/main/res/values-ru-rRU/strings.xml b/app/src/main/res/values-ru-rRU/strings.xml
index b76a08f524..71b212d508 100644
--- a/app/src/main/res/values-ru-rRU/strings.xml
+++ b/app/src/main/res/values-ru-rRU/strings.xml
@@ -110,6 +110,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
+ %1$s > %2$s
+ %2$s < %1$s
%1$s: %2$s
%1$d мин.
Выход
@@ -303,7 +305,7 @@
Сообщение
Заголовок сообщения
Текст сообщения
- Использовать два столбца в портретном режиме
+ Использовать два ряда в портретном режиме
Использовать две колонки в альбомном режиме
Показывать меню навигации в альбомном режиме по умолчанию
При запуске показывать
@@ -772,7 +774,7 @@
Нет метода доступа к хранилищу
Устаревшее приложение послало путь к файлу вместо файлового потока
Нет или нет подходящего интернет-соединения
- Подключение к одной или нескольким учётным записям …
+ Подключение к одной или нескольким учётным записям…
Папка не существует
Оригинальное сообщение будет включено
Изображение не может быть декодировано
diff --git a/app/src/main/res/values-sk-rSK/strings.xml b/app/src/main/res/values-sk-rSK/strings.xml
index fb618a75ed..d9682c8431 100644
--- a/app/src/main/res/values-sk-rSK/strings.xml
+++ b/app/src/main/res/values-sk-rSK/strings.xml
@@ -510,6 +510,7 @@ Nastavenie vždy toto kompenzuje neustálym sledovaním zmien.
Oznámenia o novej správe budú vždy odstránené, keď ich odmietnete potiahnutím a po označení správy ako prečítanej
Kliknite na názov kanálu pre nastavenie jeho vlastností
Pre nastavenie predvoleného zvuku atď
+ Zakázať oznámenie monitorovanie účtov
Pre nositeľné zariadenia, ktoré dokážu zobraziť celý text (do 5000 znakov)
Toto pozdrží zobrazenie oznámení, kým nebudú prevzaté aj texty správ
Oznámenia sa odošlú na nositeľné zariadenia až po prevzatí textov správ
@@ -626,6 +627,7 @@ Nastavenie vždy toto kompenzuje neustálym sledovaním zmien.
Prehliadať správy na serveri
Označiť správy za prečítané po rozbalení
Synchronizovať teraz
+ Synchronizovať vnorené priečinky
Synchronizovať viac správ
Synchronizovať
Vymazať lokálne správy
@@ -892,7 +894,6 @@ Nastavenie vždy toto kompenzuje neustálym sledovaním zmien.
Telo správy je prázdne
priložené,príloha,prílohy,zahrnuté
Mali ste v úmysle pridať prílohu?
- Všetko formátovanie bude stratené
Správa (%1$s) väčšia než serverový limit (%2$s)
Nie všetky prílohy boli prevzaté
Tento dialóg môže byť znovu zapnutý cez menu s troma bodkami v hornom panely akcií
diff --git a/app/src/main/res/values-sv-rSE/strings.xml b/app/src/main/res/values-sv-rSE/strings.xml
index 589a3c9e75..697b633f56 100644
--- a/app/src/main/res/values-sv-rSE/strings.xml
+++ b/app/src/main/res/values-sv-rSE/strings.xml
@@ -88,8 +88,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
+ %1$s > %2$s
+ %2$s < %1$s
%1$s: %2$s
%1$d minuter
Avsluta
@@ -878,7 +878,7 @@
Meddelandet är tomt
bifogad,bilaga,bilaga,inkluderat
Hade du för avsikt att lägga till en bifogad fil?
- All formatering kommer gå förlorad
+ All formatering kommer att förloras
Meddelande (%1$s) större än gränsen på servern (%2$s)
Inte alla bilagor har hämtats
Denna dialogruta kan aktiveras igen via tre-pricks-menyn i åtgärdsfältet
diff --git a/app/src/main/res/values-tr-rTR/strings.xml b/app/src/main/res/values-tr-rTR/strings.xml
index eb04b9ddd4..addcc26f33 100644
--- a/app/src/main/res/values-tr-rTR/strings.xml
+++ b/app/src/main/res/values-tr-rTR/strings.xml
@@ -88,8 +88,6 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
%1$s: %2$s
%1$d dakika
Çıkış
diff --git a/app/src/main/res/values-zh-rCN/strings.xml b/app/src/main/res/values-zh-rCN/strings.xml
index e437336326..5b0db64264 100644
--- a/app/src/main/res/values-zh-rCN/strings.xml
+++ b/app/src/main/res/values-zh-rCN/strings.xml
@@ -76,8 +76,8 @@
%1$s/%2$s
%1$s (%2$s)
%1$s +%2$d
- %1$s ▶ %2$s
- %2$s ◀ %1$s
+ %1$s > %2$s
+ %2$s < %1$s
%1$s: %2$s
%1$d分钟
退出
@@ -481,7 +481,7 @@
滑走或标为已读时将总会移除新消息通知
点击频道名称来设置频道属性
设置默认声音等
- 禁用“监视”通知
+ 禁用 “监视” 通知
为可穿戴设备显示完整文本(最多5,000个字符)
这会延迟通知的显示直到消息文本下载完成
通知仅在消息文本下载后发送到可穿戴设备
@@ -867,7 +867,7 @@
消息为空
至少包含一个附件
您是否打算添加一个附件？
- 所有格式文本都将丢失
+ 所有文本格式都将丢失
消息 (%1$s) 超出服务器限制 (%2$s)
没有下载全部附件
此对话框可通过顶部操作栏右上角的三圆点菜单再次启用
diff --git a/docs/FAQ-af-rZA.md b/docs/FAQ-af-rZA.md
index ba02504f26..e557fe7d65 100644
--- a/docs/FAQ-af-rZA.md
+++ b/docs/FAQ-af-rZA.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-ar-rBH.md b/docs/FAQ-ar-rBH.md
index a38795a8f0..689fecdc29 100644
--- a/docs/FAQ-ar-rBH.md
+++ b/docs/FAQ-ar-rBH.md
@@ -1,6 +1,6 @@
# دعم فير ايميل
-إذا كان لديك تساؤل, يرجى التثبت من الأسئلة المتكررة أدناه أولا. في الجزء السفلي ، يمكنك معرفة كيفية طرح أسئلة أخرى وطلب الميزات والإبلاغ عن الأخطاء.
+If you have a question, please check the frequently asked questions below first. في الجزء السفلي ، يمكنك معرفة كيفية طرح أسئلة أخرى وطلب الميزات والإبلاغ عن الأخطاء.
## فهرس
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-ar-rEG.md b/docs/FAQ-ar-rEG.md
index a38795a8f0..aede080fda 100644
--- a/docs/FAQ-ar-rEG.md
+++ b/docs/FAQ-ar-rEG.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-ar-rYE.md b/docs/FAQ-ar-rYE.md
index a38795a8f0..aede080fda 100644
--- a/docs/FAQ-ar-rYE.md
+++ b/docs/FAQ-ar-rYE.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-az-rAZ.md b/docs/FAQ-az-rAZ.md
index 119db61aea..e38b8d64f2 100644
--- a/docs/FAQ-az-rAZ.md
+++ b/docs/FAQ-az-rAZ.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-bg-rBG.md b/docs/FAQ-bg-rBG.md
index 07b3c08baf..1e4c948359 100644
--- a/docs/FAQ-bg-rBG.md
+++ b/docs/FAQ-bg-rBG.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-bn-rBD.md b/docs/FAQ-bn-rBD.md
index 4648ac0ef3..bf22dbd905 100644
--- a/docs/FAQ-bn-rBD.md
+++ b/docs/FAQ-bn-rBD.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-bn-rIN.md b/docs/FAQ-bn-rIN.md
index 4648ac0ef3..bf22dbd905 100644
--- a/docs/FAQ-bn-rIN.md
+++ b/docs/FAQ-bn-rIN.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-ca-rES.md b/docs/FAQ-ca-rES.md
index 40f70e8b4c..3729b6b200 100644
--- a/docs/FAQ-ca-rES.md
+++ b/docs/FAQ-ca-rES.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-cs-rCZ.md b/docs/FAQ-cs-rCZ.md
index 2c958ecbef..20f3442b4f 100644
--- a/docs/FAQ-cs-rCZ.md
+++ b/docs/FAQ-cs-rCZ.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-da-rDK.md b/docs/FAQ-da-rDK.md
index 94f6799b10..fb348504df 100644
--- a/docs/FAQ-da-rDK.md
+++ b/docs/FAQ-da-rDK.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* For *554 5.7.1 Tjeneste utilgængelig; Klient vært xxx.xxx.xxx.xxx blokeret*, tjek venligst [hér](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntaksfejl - linje for lang* er ofte forårsaget af brug af en lang Autocrypt-header
* *503 5.5.0 Modtager allerede angivet* betyder typisk, at en adresse bruges som både TO- og CC-adresse
+* *554 5.7.1 ... ikke tilladt at videresende* betyder, at e-mailserveren ikke genkender brugernavnet/e-mailadressen. Dobbelttjek værtsnavn og brugernavn/e-mailadresse i identitetsindstillingerne.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-de-rAT.md b/docs/FAQ-de-rAT.md
index 315c6f59a8..4883dad71c 100644
--- a/docs/FAQ-de-rAT.md
+++ b/docs/FAQ-de-rAT.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service nicht verfügbar; Client Host xxx.xxx.xxx.xxx blockiert*, bitte [hier schauen](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntaxfehler — Zeile zu lang* wird oft durch die Verwendung von langen Autocrypt-Kopfzeilen verursacht
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 … nicht zur Weiterleitung zugelassen* bedeutet, dass der E-Mail-Server den Benutzernamen/E-Mail-Adresse nicht erkennen konnte. Bitte überprüfen Sie den Hostnamen, Benutzernamen und E-Mail-Adresse in den Identitätseinstellungen.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-de-rDE.md b/docs/FAQ-de-rDE.md
index 315c6f59a8..4883dad71c 100644
--- a/docs/FAQ-de-rDE.md
+++ b/docs/FAQ-de-rDE.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service nicht verfügbar; Client Host xxx.xxx.xxx.xxx blockiert*, bitte [hier schauen](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntaxfehler — Zeile zu lang* wird oft durch die Verwendung von langen Autocrypt-Kopfzeilen verursacht
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 … nicht zur Weiterleitung zugelassen* bedeutet, dass der E-Mail-Server den Benutzernamen/E-Mail-Adresse nicht erkennen konnte. Bitte überprüfen Sie den Hostnamen, Benutzernamen und E-Mail-Adresse in den Identitätseinstellungen.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-de-rLI.md b/docs/FAQ-de-rLI.md
index 315c6f59a8..4883dad71c 100644
--- a/docs/FAQ-de-rLI.md
+++ b/docs/FAQ-de-rLI.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service nicht verfügbar; Client Host xxx.xxx.xxx.xxx blockiert*, bitte [hier schauen](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntaxfehler — Zeile zu lang* wird oft durch die Verwendung von langen Autocrypt-Kopfzeilen verursacht
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 … nicht zur Weiterleitung zugelassen* bedeutet, dass der E-Mail-Server den Benutzernamen/E-Mail-Adresse nicht erkennen konnte. Bitte überprüfen Sie den Hostnamen, Benutzernamen und E-Mail-Adresse in den Identitätseinstellungen.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-el-rGR.md b/docs/FAQ-el-rGR.md
index 0952be109f..d9ad878fa4 100644
--- a/docs/FAQ-el-rGR.md
+++ b/docs/FAQ-el-rGR.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-en-rGB.md b/docs/FAQ-en-rGB.md
index f157005750..22e8b10a3a 100644
--- a/docs/FAQ-en-rGB.md
+++ b/docs/FAQ-en-rGB.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-es-rES.md b/docs/FAQ-es-rES.md
index 1fc4a24c1f..45181a1373 100644
--- a/docs/FAQ-es-rES.md
+++ b/docs/FAQ-es-rES.md
@@ -901,6 +901,7 @@ Los servidores SMTP pueden rechazar los mensajes por [varias razones](https://en
* *554 5.7.1 Servicio no disponible; Host cliente xxxx.xx.xx.xxx bloqueado*, por favor [vea aquí](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Error de sintaxis - línea demasiado larga* es a menudo causada por el uso de un encabezado Autocrypt largo
* *503 5.5.0 Destinatario ya especificado* significa principalmente que una dirección está siendo utilizada como dirección A y CC
+* *554 5.7.1 ... no se permite transmitir* significa que el servidor de correo electrónico no reconoce el nombre de usuario/dirección de correo electrónico. Por favor, compruebe el nombre de host y el nombre de usuario/dirección de correo electrónico en la configuración de identidad.
**Errores de Gmail**
@@ -2697,6 +2698,8 @@ Se puede configurar una cuenta de Office 365 mediante el asistente de configurac
Si el asistente termina con *AUTHENTICATE falló*, IMAP y/o SMTP podrían estar deshabilitados para la cuenta. En este caso debería pedir al administrador que active IMAP y SMTP. El procedimiento está documentado [aquí](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+Si ha activado *valores predeterminados de seguridad* en su organización, puede que necesite habilitar el protocolo SMTP AUTH. Por favor, [vea aquí](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) sobre cómo hacerlo.
+
@@ -2711,7 +2714,7 @@ Veuillez [voir ici](http://jc.etiemble.free.fr/abc/index.php/trucs-astuces/confi
-**(158) ¿Qué cámara / grabadora de audio recomienda?**
+**(158) ¿Qué cámara / grabadora de audio recomiendas?**
Para tomar fotos y grabar audio se necesita una cámara y una aplicación de grabación de audio. Las siguientes aplicaciones son cámaras y grabadoras de audio de código abierto:
@@ -2732,7 +2735,7 @@ Después de descargar las listas en la configuración de privacidad, las listas
* para avisar sobre el enlaces de seguimiento al abrir enlaces
* para reconocer imágenes de seguimiento en los mensajes
-Las imágenes de seguimiento sólo se desactivarán si la opción principal 'desactivar' correspondiente está habilitada.
+Las imágenes de seguimiento sólo se desactivarán si la opción principal correspondiente 'desactivar' está habilitada.
Las imágenes de seguimiento no serán reconocidas cuando el dominio se clasifique como '*Contenido*', vea [aquí](https://disconnect.me/trackerprotection#trackers-we-dont-block) para más información.
@@ -2742,7 +2745,7 @@ Este comando puede ser enviado a FairEmail desde una aplicación de automatizaci
(adb shell) am startservice -a eu.faircode.email.DISCONNECT.ME
```
-Probablemente sea suficiente actualizar una vez a la semana, consulte [aquí](https://github.com/disconnectme/disconnect-tracking-protection/commits/master) para ver los cambios en las listas recientes.
+Probablemente sea suficiente actualizar una vez a la semana, consulte [aquí](https://github.com/disconnectme/disconnect-tracking-protection/commits/master) para ver los cambios recientes en las listas.
@@ -2763,7 +2766,7 @@ Si pudiera, añadiría un ajuste para seleccionar el color principal y de acento
## Soporte
-Sólo la última versión de Play Store y la última versión de GitHub son soportadas. Esto también significa que bajar de versión no es soportado.
+Sólo la última versión de Play Store y la última versión de GitHub son soportadas. Esto también significa que bajar de versión no está soportado.
Las características solicitadas deberían:
diff --git a/docs/FAQ-eu-rES.md b/docs/FAQ-eu-rES.md
index 62d3d45e74..3b48dd5e1b 100644
--- a/docs/FAQ-eu-rES.md
+++ b/docs/FAQ-eu-rES.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-fa-rIR.md b/docs/FAQ-fa-rIR.md
index f63f001e95..0f06572e29 100644
--- a/docs/FAQ-fa-rIR.md
+++ b/docs/FAQ-fa-rIR.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-fi-rFI.md b/docs/FAQ-fi-rFI.md
index a2430bedcf..142ecfd848 100644
--- a/docs/FAQ-fi-rFI.md
+++ b/docs/FAQ-fi-rFI.md
@@ -43,7 +43,7 @@ Aiheeseen liittyvät kysymykset:
## Kuinka ...?
-* Change the account name: Setup, step 1, Manage, tap account
+* Vaihda tilin nimi: Asetukset, vaihe 1, Muokkaa, napauta tiliä
* Change the swipe left/right target: Setup, Behavior, Set swipe actions
* Change password: Setup, step 1, Manage, tap account, change password
* Set a signature: Setup, step 2, Manage, tap identity, Edit signature.
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-fr-rCA.md b/docs/FAQ-fr-rCA.md
index 78fb8adaf7..4ccfe9bb06 100644
--- a/docs/FAQ-fr-rCA.md
+++ b/docs/FAQ-fr-rCA.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Erreur de syntaxe - ligne trop longue* est souvent provoquée par l'utilisation d'un en-tête Autocrypt long
* *503 5.5.0 Recipient already specified* signifie généralement qu'une adresse est utilisée à la fois comme adresse de destinataire et en copie
+* *554 5.7.1 ... not permitted to relay* signifie que le serveur de messagerie ne reconnaît pas le nom d'utilisateur/adresse e-mail. Veuillez vérifier le nom d’hôte et le nom d’utilisateur/adresse e-mail dans les paramètres d’identité.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-fr-rFR.md b/docs/FAQ-fr-rFR.md
index 3fe90ff5af..8f01616fb6 100644
--- a/docs/FAQ-fr-rFR.md
+++ b/docs/FAQ-fr-rFR.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Erreur de syntaxe - ligne trop longue* est souvent provoquée par l'utilisation d'un en-tête Autocrypt long
* *503 5.5.0 Recipient already specified* signifie généralement qu'une adresse est utilisée à la fois comme adresse de destinataire et en copie
+* *554 5.7.1 ... not permitted to relay* signifie que le serveur de messagerie ne reconnaît pas le nom d'utilisateur/adresse e-mail. Veuillez vérifier le nom d’hôte et le nom d’utilisateur/adresse e-mail dans les paramètres d’identité.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-fy-rNL.md b/docs/FAQ-fy-rNL.md
index 29f97e0281..5544e3e2ab 100644
--- a/docs/FAQ-fy-rNL.md
+++ b/docs/FAQ-fy-rNL.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-gl-rES.md b/docs/FAQ-gl-rES.md
index 8f039bb0bc..e98f4ea0d0 100644
--- a/docs/FAQ-gl-rES.md
+++ b/docs/FAQ-gl-rES.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-hi-rIN.md b/docs/FAQ-hi-rIN.md
index ba02504f26..e557fe7d65 100644
--- a/docs/FAQ-hi-rIN.md
+++ b/docs/FAQ-hi-rIN.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-hr-rHR.md b/docs/FAQ-hr-rHR.md
index 9d66f0f42a..fa69d44b23 100644
--- a/docs/FAQ-hr-rHR.md
+++ b/docs/FAQ-hr-rHR.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-hu-rHU.md b/docs/FAQ-hu-rHU.md
index 330f4f174f..b2a40f42bb 100644
--- a/docs/FAQ-hu-rHU.md
+++ b/docs/FAQ-hu-rHU.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-in-rID.md b/docs/FAQ-in-rID.md
index 6bc64d5d3f..1a056f7abf 100644
--- a/docs/FAQ-in-rID.md
+++ b/docs/FAQ-in-rID.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-it-rIT.md b/docs/FAQ-it-rIT.md
index 6b1002af35..a8fdab339f 100644
--- a/docs/FAQ-it-rIT.md
+++ b/docs/FAQ-it-rIT.md
@@ -328,22 +328,22 @@ FairEmail manterrà un elenco di indirizzi da cui ricevi e invii messaggi e user
**(2) Perché è mostrata una notifica permanente?**
-Una notifica della barra dello stato permanente a bassa priorità con il numero di profili monitorati e il numero di operazioni in attesa (vedi prossima domanda) è mostrata per prevenire che Android termini il servizio che si occupa della ricezione continua delle email. Questo era [già necessario](https://developer.android.com/reference/android/app/Service.html#startForeground(int,%20android.app.Notification)), ma con l'introduzione della [doze mode](https://developer.android.com/training/monitoring-device-state/doze-standby) in Android 6 Marshmallow questo è necessario più che mai. Doze mode will stop all apps when the screen is off for some time, unless the app did start a foreground service, which requires showing a status bar notification.
+Una notifica della barra dello stato permanente a bassa priorità con il numero di profili monitorati e il numero di operazioni in attesa (vedi prossima domanda) è mostrata per prevenire che Android termini il servizio che si occupa della ricezione continua delle email. Questo era [già necessario](https://developer.android.com/reference/android/app/Service.html#startForeground(int,%20android.app.Notification)), ma con l'introduzione della [doze mode](https://developer.android.com/training/monitoring-device-state/doze-standby) in Android 6 Marshmallow questo è necessario più che mai. La modalità Doze interromperà tutte le app quando lo schermo è spento per un po' di tempo, a meno che l'app non abbia avviato un servizio in primo piano, che richiede la visualizzazione di una notifica della barra di stato.
-Most, if not all, other email apps don't show a notification with the "side effect" that new messages are often not or late being reported and that messages are not or late being sent.
+La maggior parte, se non tutte, le altre app d'email non mostrano una notifica, con "effetto collaterale" che i nuovi messaggi sono spesso non segnalati o segnalati tardi e che i messaggi non sono inviati o inviati tardi.
-Android shows icons of high priority status bar notifications first and will hide the icon of FairEmail's notification if there is no space to show icons anymore. In practice this means that the status bar notification doesn't take space in the status bar, unless there is space available.
+Android mostra prima le icone delle notifiche della barra di stato di alta priorità e nasconderà l'icona della notifica di FairEmail se non c'è più spazio per mostrare le icone. In pratica ciò significa che la notifica della barra di stato non prende spazio nella barra di stato, a meno che non ci sia spazio disponibile.
-The status bar notification can be disabled via the notification settings of FairEmail:
+La notifica della barra di stato può essere disabilitata tramite le impostazioni di notifica di FairEmail:
* Android 8 Oreo e successive: tocca il pulsante *Ricevi canale* e disabilita il canale tramite le impostazioni di Android (questo non disabiliterà le notifiche dei messaggi)
-* Android 7 Nougat and before: enabled *Use background service to synchronize messages*, but be sure to read the remark below the setting
+* Android 7 Nougat e precedenti: abilitato l'*Uso del servizio in background per sincronizzare i messaggi*, ma assicurati di leggere l'osservazione sotto l'impostazione
-You can switch to periodically synchronization of messages in the receive settings to remove the notification, but be aware that this might use more battery power. See [here](#user-content-faq39) for more details about battery usage.
+Puoi passare alla sincronizzazione dei messaggi periodicamente nelle impostazioni di ricezione per rimuovere la notifica, ma sii consapevole che ciò potrebbe usare maggiore energia della batteria. Vedi [qui](#user-content-faq39) per ulteriori dettagli sull'uso della batteria.
-Android 8 Oreo might also show a status bar notification with the text *Apps are running in the background*. Please see [here](https://www.reddit.com/r/Android/comments/7vw7l4/psa_turn_off_background_apps_notification/) about how you can disable this notification.
+Android 8 Oreo potrebbe anche mostrare una notifica della barra di stato con il testo *Le app sono in esecuzione in background*. Sei pregato di vedere [qui](https://www.reddit.com/r/Android/comments/7vw7l4/psa_turn_off_background_apps_notification/) su come puoi disabilitare questa notifica.
-Alcune persone hanno suggerito di usare [Firebase Cloud Messaging](https://firebase.google.com/docs/cloud-messaging/) (FCM) invece di un servizio Android con una notifica della barra dello stato, ma questo richiederebbe ai fornitori dell'email di inviare messaggi FCM ad o ad un server centrale dove sono raccolti tutti i messaggi di inviare messaggi FCM. The first is not going to happen and the last would have significant privacy implications.
+Alcune persone hanno suggerito di usare [Firebase Cloud Messaging](https://firebase.google.com/docs/cloud-messaging/) (FCM) invece di un servizio Android con una notifica della barra dello stato, ma questo richiederebbe ai fornitori dell'email di inviare messaggi FCM ad o ad un server centrale dove sono raccolti tutti i messaggi di inviare messaggi FCM. La prima non si verificherà è l'ultima avrà significative implicazioni sulla privacy.
Se sei venuto/a qui cliccando sulla notifica, dovresti sapere che il prossimo clic aprirà la casella di posta unificata.
@@ -352,39 +352,39 @@ Se sei venuto/a qui cliccando sulla notifica, dovresti sapere che il prossimo cl
**(3) Cosa sono le operazioni e perché sono in sospeso?**
-The low priority status bar notification shows the number of pending operations, which can be:
-
-* *add*: add message to remote folder
-* *move*: move message to another remote folder
-* *copy*: copy message to another remote folder
-* *fetch*: fetch changed (pushed) message
-* *delete*: delete message from remote folder
-* *seen*: mark message as read/unread in remote folder
-* *answered*: mark message as answered in remote folder
-* *flag*: add/remove star in remote folder
-* *keyword*: add/remove IMAP flag in remote folder
-* *label*: set/reset Gmail label in remote folder
-* *headers*: download message headers
-* *raw*: download raw message
-* *body*: download message text
-* *attachment*: download attachment
-* *sync*: synchronize local and remote messages
-* *subscribe*: subscribe to remote folder
-* *purge*: delete all messages from remote folder
-* *send*: send message
-* *exists*: check if message exists
-* *rule*: execute rule on body text
-
-Operations are processed only when there is a connection to the email server or when manually synchronizing. See also [this FAQ](#user-content-faq16).
+La notifica della barra dello stato a bassa priorità mostra il numero di operazioni in sospeso, che possono essere:
+
+* *add*: aggiungi messaggio alla cartella remota
+* *move*: sposta messaggio ad un'altra cartella remota
+* *copy*: copia messaggio in un'altra cartella remota
+* *fetch*: preleva il messaggio modificato (spinto)
+* *delete*: elimina il messaggio dalla cartella remota
+* *seen*: contrassegna il messaggio come letto/non letto nella cartella remota
+* *answered*: contrassegna il messaggio come risposto nella cartella remota
+* *flag*: aggiunge/rimuove la stella nella cartella remota
+* *keyword*: aggiunge/rimuove il flag IMAP nella cartella remota
+* *label*: imposta/ripristina l'etichetta di Gmail nella cartella remota
+* *headers*: scarica le intestazioni dei messaggi
+* *raw*: scarica il messaggio grezzo
+* *body*: scarica il testo del messaggio
+* *attachment*: scarica l'allegato
+* *sync*: sincronizza i messaggi locali e remoti
+* *subscribe*: si iscrive alla cartella remota
+* *purge*: elimina tutti i messaggi dalla cartella remota
+* *send*: invia messaggio
+* *exists*: controlla se il messaggio esiste
+* *rule*: esegui regola sul corpo del testo
+
+Le operazioni sono elaborate solo quando esiste una connessione al server email o quando sincronizza manualmente. Vedi anche [questa FAQ](#user-content-faq16).
**(4) Come posso usare un certificato di sicurezza non / password vuota / connessione di testo semplice?**
-*... Untrusted ... not in certificate ...*
+*... Non affidabile ... non nel certificato ...*
-*... Invalid security certificate (Can't verify identity of server) ...*
+*... Certificato di sicurezza non valido (Impossibile verificare l'identità del server) ...*
Dovresti provare a risolvere ciò contattando il tuo fornitore o ottenendo un certificato di sicurezza valido perché i certificati di sicurezza non validi non sono sicuri e consente gli [attacchi man-in-the-middle](https://en.wikipedia.org/wiki/Man-in-the-middle_attack). Se il denaro è un ostacolo, puoi ottenere dei certificati di sicurezza gratuiti da [Let's Encrypt](https://letsencrypt.org).
@@ -420,88 +420,88 @@ Nel menu di overflow a tre punti è possibile abilitare o disabilitare o selezio
* *text size*: for three different font sizes
* *compact view*: for more condensed message items and a smaller message text font
-In the display section of the settings you can enable or disable:
+Nella sezione di visualizzazione delle impostazioni puoi abilitare o disabilitare:
-* *Unified inbox*: to disable the unified inbox and to list the folders selected for the unified inbox instead
-* *Group by date*: show date header above messages with the same date
+* *Casella unificata*: per disabilitare la casella della posta in arrivo unificata ed elencare le cartelle selezionate invece per la casella di posta in arrivo unificata
+* *Group by date*: mostra l'intestazione di data sui messaggi con la stessa data
* *Conversation threading*: to disable conversation threading and to show individual messages instead
-* *Show contact photos*: to hide contact photos
-* *Show identicons*: to show generated contact avatars
-* *Show names and email addresses*: to show names or to show names and email addresses
-* *Show subject italic*: to show the message subject as normal text
-* *Show stars*: to hide stars (favorites)
-* *Show message preview*: to show two lines of the message text
-* *Show address details by default*: to expand the addresses section by default
-* *Use monospaced font for message text*: to use a fixed width typeface for message texts
-* *Automatically show original message for known contacts*: to automatically show original messages for contacts on your device, please read [this FAQ](#user-content-faq35)
+* *Mostra foto dei contatti*: per nascondere le foto di contatto
+* *Mostra identicon*: per mostrare gli avatar di contatto generati
+* *Mostra nomi ed indirizzi email*: per mostrare nomi o mostrare nomi ed indirizzi email
+* *Mostra soggetto corsivo*: per mostrare il soggetto del messaggio come testo normale
+* *Mostra stelle*: per nascondere le stelle (preferiti)
+* *Mostra anteprima messaggio*: per mostrare due righe del testo del messaggio
+* *Mostra dettagli dell'indirizzo di default*: per espandere la sezione degli indirizzi di default
+* *Usa carattere monospaziato per il testo del messaggio*: per usare un tipo di testo di larghezza fissa per i testi del messaggio
+* *Mostra automaticamente il messaggio originale per i contatti noti*: per mostrare automaticamente i messaggi originali per i contatti sul tuo dispositivo, sei pregato di leggere [questa FAQ](#user-content-faq35)
* *Automatically show images for known contacts*: to automatically show images for contacts on your device, please read [this FAQ](#user-content-faq35)
-* *Conversation action bar*: to disable the bottom navigation bar
+* *Barra di azione della conversazione*: per disabilitare la barra di navigazione in basso
-Note that messages can be previewed only when the message text was downloaded. Larger message texts are not downloaded by default on metered (generally mobile) networks. You can change this in the settings.
+Nota che i messaggi possono essere visti in anteprima solo quando il testo del messaggio è stato scaricato. I testi del messaggio più grandi non sono scaricati di default sulle reti misurate (generalmente mobili). Puoi modificare ciò nelle impostazioni.
-If the list of addresses is long, you can collapse the addresses section with the *less* icon at the top of the addresses section.
+Se l'elenco degli indirizzi è lungo, puoi comprimere la sezione degli indirizzi con l'icona *meno* nella parte superiore della sezione degli indirizzi.
-Some people ask:
+Alcune persone chiedono:
-* to show the subject bold, but bold is already being used to highlight unread messages
-* to show the address or subject larger/smaller, but this would interfere with the text size option
-* to move the star to the left, but it is much easier to operate the star on the right side
+* di mostrare il soggetto in grassetto, ma il grassetto è già usato per evidenziare i messaggi non letti
+* di mostrare l'indirizzo o l'oggetto più grande/più piccolo, ma questo interferirebbe con l'opzione di dimensione del testo
+* di spostare la stella a sinistra, ma è molto più facile azionarla sul lato destro
-Unfortunately, it is impossible to make everybody happy and adding lots of settings would not only be confusing, but also never be sufficient.
+Sfortunatamente, è impossibile rendere tutti felici ed aggiungere molte impostazioni non sarebbe solo confusionario, ma anche mai sufficiente.
**(6) Come posso accedere a Gmail / G suite?**
-You can use the quick setup wizard to easily setup a Gmail account and identity.
+Puoi usare la procedura guidata di configurazione rapida per configurare facilmente un profilo ed un'identità di Gmail.
-If you don't want to use an on-device Gmail account, you can either enable access for "less secure apps" and use your account password (not advised) or enable two factor authentication and use an app specific password. To use a password you'll need to setup an account and identity via setup step 1 and 2 instead of via the quick setup wizard.
+Se non vuoi usare un profilo Gmail sul dispositivo, puoi abilitare l'accesso per le "app meno sicure" ed usare la password del tuo profilo (sconsigliato) o abilitare l'autenticazione a due fattori ed usare una password specifica dell'app. Per usare una password dovrai configurare un profilo ed un'identità tramite i passaggi 1 e 2 della configurazione invece che tramite la procedura guidata di configurazione rapida.
-Please see [this FAQ](#user-content-faq111) on why only on-device accounts can be used.
+Sei pregato di vedere [questa FAQ](#user-content-faq111) su perché solo i profili su dispositivo sono utilizzabili.
-Note that an app specific password is required when two factor authentication is enabled.
+Nota che una password specifica dell'app è necessaria quando è abilitata l'autenticazione a due fattori.
-*App specific password*
+*Password specifica dell'app*
-See [here](https://support.google.com/accounts/answer/185833) about how to generate an app specific password.
+Vedi [qui](https://support.google.com/accounts/answer/185833) su come generare una password specifica dell'app.
-*Enable "Less secure apps"*
+*Abilita "App meno sicure"*
-**Important**: using this method is not recommended because it is less reliable.
+**Importante**: usare questo metodo è sconsigliato perché meno affidabile.
-**Important**: Gsuite accounts authorized with a username/password will stop working [in the near future](https://gsuiteupdates.googleblog.com/2019/12/less-secure-apps-oauth-google-username-password-incorrect.html).
+**Importante**: I profili autorizzati di Gsuite con un nome utente/una password smetteranno di funzionare [nel futuro prossimo](https://gsuiteupdates.googleblog.com/2019/12/less-secure-apps-oauth-google-username-password-incorrect.html).
-See [here](https://support.google.com/accounts/answer/6010255) about how to enable "less secure apps" or go [directy to the setting](https://www.google.com/settings/security/lesssecureapps).
+Vedi [qui](https://support.google.com/accounts/answer/6010255) su come abilitare le "app meno sicure" o vai [direttamente all'impostazione](https://www.google.com/settings/security/lesssecureapps).
-If you use multiple Gmail accounts, make sure you change the "less secure apps" setting of the right account(s).
+Se usi profili multipli di Gmail, assicurati di cambiare l'impostazione "app meno sicure del profilo corretto.
-Be aware that you need to leave the "less secure apps" settings screen by using the back arrow to apply the setting.
+Sappi che devi lasciare la schermata delle impostazioni delle "app meno sicure" usando la freccia indietro per applicare l'impostazione.
-If you use this method, you should use a [strong password](https://en.wikipedia.org/wiki/Password_strength) for your Gmail account, which is a good idea anyway. Note that using the [standard](https://tools.ietf.org/html/rfc3501) IMAP protocol in itself is not less secure.
+Se usi questo metodo, dovresti usare una [password forte](https://en.wikipedia.org/wiki/Password_strength) per il tuo profilo Gmail, che è comunque una buona idea. Nota che di per se, usare il protocollo IMAP [standard](https://tools.ietf.org/html/rfc3501) non è meno sicuro.
-When "less secure apps" is not enabled, you'll get the error *Authentication failed - invalid credentials* for accounts (IMAP) and *Username and Password not accepted* for identities (SMTP).
+Quando "app meno sicure" non è abilitata, otterrai l'errore *Autenticazione fallita - credenziali non valide* per i profili (IMAP) e *Nome utente e Password non accettati* per le identità (SMTP).
-*General*
+*Generale*
-You might get the alert "*Please log in via your web browser*". This happens when Google considers the network that connects you to the internet (this could be a VPN) to be unsafe. This can be prevented by using the Gmail quick setup wizard or an app specific password.
+Potresti ottenere l'avviso "*Sei pregato di accedere tramite il tuo browser web*". Questo si verifica quando Google considera la rete cui ti connetti ad internet (potrebbe essere un VPN) come non sicura. Questo si può prevenire usando la procedura guidata di configurazione rapida di Gmail o una password specifica dell'app.
-See [here](https://support.google.com/mail/answer/7126229) for Google's instructions and [here](https://support.google.com/mail/accounts/answer/78754) for troubleshooting.
+Vedi [qui](https://support.google.com/mail/answer/7126229) per le istruzioni di Google e [qui](https://support.google.com/mail/accounts/answer/78754) per la risoluzione dei prbolemi.
**(7) Perché i messaggi inviati non compaiono (direttamente) nella cartella inviati?**
-Sent messages are normally moved from the outbox to the sent folder as soon as your provider adds sent messages to the sent folder. This requires a sent folder to be selected in the account settings and the sent folder to be set to synchronizing.
+I messaggi inviati sono normalmente spostati dalla posta in uscita alla cartella inviati appena il tuo fornitore aggiunge i messaggi inviati alla cartella dei messaggi inviati. Ciò richiede che una cartella inviati sia selezionata nelle impostazioni del profilo e che la cartella degli inviati sia impostata per la sincronizzazione.
-Some providers do not keep track of sent messages or the used SMTP server might not be related to the provider. In these cases FairEmail, will automatically add sent messages to the sent folder on synchronizing the sent folder, which will happen after a message have been sent. Note that this will result in extra internet traffic.
+Alcuni fornitori non tengono traccia dei messaggi inviati o il server SMTP usato potrebbe non essere correlato al fornitore. In questi casi, FairEmail, aggiungerà automaticamente i messaggi inviati alla cartella inviati alla sincronizzazione della cartella degli inviati, che si verificherà dopo che è un messaggio è stato inviato. Nota che questo risulterà in traffico internet supplementare.
~~If this doesn't happen, your provider might not keep track of sent messages or you might be using an SMTP server not related to the provider.~~ ~~In these cases you can enable the advanced identity setting *Store sent messages* to let FairEmail add sent messages to the sent folder right after sending a message.~~ ~~Note that enabling this setting might result in duplicate messages if your provider adds sent messages to the sent folder too.~~ ~~Also beware that enabling this setting will result in extra data usage, especially when when sending messages with large attachments.~~
@@ -512,39 +512,39 @@ Some providers do not keep track of sent messages or the used SMTP server might
**(8) Posso usare un profilo di Microsoft Exchange?**
-You can use a Microsoft Exchange account if it is accessible via IMAP, which is mostly the case. See [here](https://support.office.com/en-us/article/what-is-a-microsoft-exchange-account-47f000aa-c2bf-48ac-9bc2-83e5c6036793) for more information.
+Puoi usare un profilo di Microsoft Exchange se è accessibile tramite IMAP, che lo è per lo più. Vedi [qui](https://support.office.com/en-us/article/what-is-a-microsoft-exchange-account-47f000aa-c2bf-48ac-9bc2-83e5c6036793) per ulteriori informazioni.
-Please see [here](https://support.office.com/en-us/article/pop-imap-and-smtp-settings-for-outlook-com-d088b986-291d-42b8-9564-9c414e2aa040) for the Microsoft documentation about configuring an email client. There is also a section about common connection errors and solutions.
+Sei pregato di vedere [qui](https://support.office.com/en-us/article/pop-imap-and-smtp-settings-for-outlook-com-d088b986-291d-42b8-9564-9c414e2aa040) per la documentazione di Microsoft sulla configurazione di un client di posta elettronica. Esiste anche una sezione sugli errori di connessione comuni e le soluzioni.
-Some older Exchange server versions have a bug causing empty message and corrupt attachments. Please see [this FAQ](#user-content-faq110) for a workaround.
+Alcune vecchie versioni del server di Exchange hanno un bug che causa messaggi vuoti ed allegati corrotti. Sei pregato di vedere [questa FAQ](#user-content-faq110) per un workaround.
-Please see [this FAQ](#user-content-faq133) about ActiveSync support.
+Sei pregato di vedere [questa FAQ](#user-content-faq133) sul supporto di ActiveSync.
-Please see [this FAQ](#user-content-faq111) about OAuth support.
+Sei pregato di vedere [questaFAQ](#user-content-faq111) sul supporto di OAuth.
**(9) Cosa sono le identità / come aggiungo un alias?**
-Identities represent email addresses you are sending *from* via an email (SMTP) server.
+Le identità rappresentano gli indirizzi email *da* cui stai inviando tramite un server email (SMTP).
-Some providers allow you to have multiple aliases. You can configure these by setting the email address field of an additional identity to the alias address and setting the user name field to your main email address.
+Alcuni provider ti consentono di avere alias multipli. Puoi confiurarli impostando il campo dell'indirizzo email di un'identità aggiuntiva all'indirizzo dell'alias e impostando il campo del nome utente al tuo indirizzo email principale.
-Note that you can copy an identity by long pressing it.
+Nota che puoi copiare un'identità tenendola premuta a lungo.
-Alternatively, you can enable *Allow editing sender address* in the advanced settings of an existing identity to edit the username when composing a new message, if your provider allows this.
+Alternativamente, puoi abilitare *Consenti modifica indirizzo mittente* nelle impostazioni avanzate di un'identità esistente per modificare il nome utente quando componi un nuovo messaggio, se il tuo fornitore lo consente.
-FairEmail will automatically update the passwords of related identities when you update the password of the associated account or a related identity.
+FairEmail aggiornerà automaticamente le password delle identità correlate quando aggiorni la password del profilo associato o un'identità correlata.
-See [this FAQ](#user-content-faq33) on editing the username of email addresses.
+Vedi [questa FAQ](#user-content-faq33) sulla modifica del nome utente degli indirizzi email.
**~~(10) Che significa 'UIDPLUS non supportato'?~~**
-~~The error message *UIDPLUS not supported* means that your email provider does not provide the IMAP [UIDPLUS extension](https://tools.ietf.org/html/rfc4315). This IMAP extension is required to implement two way synchronization, which is not an optional feature. So, unless your provider can enable this extension, you cannot use FairEmail for this provider.~~
+~~Il messaggio di errore *UIDPLUS non supportato* significa che il tuo fornitore email non fornisce l'[estensione UIDPLUS](https://tools.ietf.org/html/rfc4315) di IMAP. Quest'estensione di IMAP è necessaria per implementare la sincronizzazione a due passaggi, che non è una funzionalità opzionale. Quindi, a meno che il tuo fornitore non possa abilitare tale estensione, non puoi usare FairEmail per questo fornitore.~~
@@ -566,89 +566,89 @@ See [this FAQ](#user-content-faq33) on editing the username of email addresses.
**(12) Come funziona la crittografia/decrittografia?**
-*General*
+*Generale*
-Please [see here](https://en.wikipedia.org/wiki/Public-key_cryptography) about how public/private key encryption works.
+Sei pregato di [vedere qui](https://en.wikipedia.org/wiki/Public-key_cryptography) su come funziona la crittografia a chiave pubblica/privata.
-Encryption in short:
+Crittografia in breve:
-* **Outgoing** messages are encrypted with the **public key** of the recipient
-* **Incoming** messages are decrypted with the **private key** of the recipient
+* I messaggi **in uscita** sono crittografati con la **chiave pubblica** del destinatario
+* I messaggi **in arrivo** sono decrittografati con la **chiave privata** del destinatario
Signing in short:
* **Outgoing** messages are signed with the **private key** of the sender
* **Incoming** messages are verified with the **public key** of the sender
-To sign/encrypt a message, just select the appropriate method in the send dialog. You can always open the send dialog using the three-dots overflow menu in case you selected *Don't show again* before.
+Per firmare/crittografare un messaggio, seleziona semplicemente il metodo appropriato nella finestra di invio. Puoi sempre aprire la finestra di invio usando il menu di overflow a tre puntini nel caso tu abbia prima selezionato *Non mostrare più*.
-To verify a signature or to decrypt a received message, open the message and just tap the gesture or padlock icon just below the message action bar.
+Per verificare una firma o decrittografare un messaggio ricevuto, aprilo e tocca semplicemente l'icona del gesto o del lucchetto proprio sotto la barra d'azione del messaggio.
-The first time you send a signed/encrypted message you might be asked for a sign key. FairEmail will automatically store the selected sign key in the used identity for the next time. If you need to reset the sign key, just save the identity or long press the identity in the list of identities and select *Reset sign key*. The selected sign key is visible in the list of identities. If need to select a key on a case by case basis, you can create multiple identities for the same account with the same email address.
+La prima volta che invii un messaggio crittografato/decrittografato, potrebbe essere richiesta una chiave di firma. FairEmail memorizzerà automaticamente la chiave di firma selezionata nell'identità usata per la prossima volta. Se devi ripristinare la chiave di firma, salva semplicemente l'identità o tieni premuta l'identità nell'elenco di identità e seleziona *Ripristina tasto di firma*. La chiave di firma selezionata è visibile nell'elenco di identità. Se devi selezionare un tasto su base caso per caso, puoi creare identità multiple per lo stesso profilo con lo stesso indirizzo email.
-In the privacy settings you can select the default encryption method (PGP or S/MIME), enable *Sign by default*, *Encrypt by default* and *Automatically decrypt messages*, but be aware that automatic decryption is not possible if user interaction is required, like selecting a key or reading a security token.
+Nelle impostazioni sulla privacy puoi selezionare il metodo di crittografia predefinito (PGP o S/MIME), abilitare *Firma di default*, *Crittografa di default* e *Decrittografa automaticamente i messaggi*, ma sappi che la decrittografia automatica è impossibile se l'interazione dell'utente è necessaria, come la selezione di una chiave o lettura di un token di sicurezza.
-The to be encrypted message text/attachments and the decrypted message text/attachments are stored locally only and will never be added to the remote server. If you want to undo decryption, you can use the *resync* menu item in the three-dots menu of the message action bar.
+Il messaggio di testo/gli allegati da crittografare e il messaggio di testo/allegato decrittografato sono memorizzati solo localmente e non saranno mai aggiunti al server remoto. Se vuoi annullare la decrittografia, puoi usare l'elemento del menu *resync* nel menu a tre puntini della barra d'azione del messaggio.
*PGP*
-You'll need to install and configure [OpenKeychain](https://f-droid.org/en/packages/org.sufficientlysecure.keychain/) first. FairEmail was tested with OpenKeychain version 5.4. Later versions will most likely be compatible, but earlier versions might not be.
+Prima dovrai installare e configurare [OpenKeychain](https://f-droid.org/en/packages/org.sufficientlysecure.keychain/). FairEmail è stato testato con la versione 5.4 di OpenKeychain. Le ultime versioni saranno molto probabilmente compatibili, ma le precedenti potrebbero non esserlo.
-**Important**: the OpenKeychain app is known to (silently) crash when the calling app (FairEmail) is not authorized yet and is getting an existing public key. You can workaround this by trying to send a signed/encrypted message to a sender with an unknown public key.
+**Importante**: l'app di OpenKeychain è nota per crashare (improvvisamente) quando l'app chiamante (FairEmail) non è ancora autorizzata e sta ottenendo una chiave pubblica esistente. Puoi aggirarlo provando ad inviare un messaggio firmato/crittografato ad un mittente con una chiave pubblica sconosciuta.
-**Important**: if the OpenKeychain app cannot find a key (anymore), you might need to reset a previously selected key. This can be done by long pressing an identity in the list of identities (Setup, step 2, Manage).
+**Importante**: se l'app di OpenKeychain non può trovare (più) una chiave, potresti dover ripristinare una chiave precedentemente selezionata. Questo si può fare tenendo premuta un'identità nell'elenco delle identità (Configurazione, passo 2, Gestisci).
-**Important**: to let apps like FairEmail reliably connect to the OpenKeychain service to encrypt/decrypt messages, it might be necessary to disable battery optimizations for the OpenKeychain app.
+**Importante**: per far connettere affidabilmente le app come FairEmail al servizio di OpenKeychain per crittografare/decrittografare i messaggi, potrebbe essere necessario disabilitare le ottimizzazioni della batteria per l'app di OpenKeychain.
-**Important**: the OpenKeychain app reportedly needs contacts permission to work correctly.
+**Importante**: l'app di OpenKeychain ha bisogno del permesso dei contatti per funzionare correttamente.
-**Important**: on some Android versions / devices it is necessary to enable *Show popups while running in background* in the additional permissions of the Android app settings of the OpenKeychain app. Without this permission the draft will be saved, but the OpenKeychain popup to confirm/select might not appear.
+Importante: su alcune versioni e dispositivi di Android è necessario abilitare *Mostra i popup durante l'esecuzione in background* nei permessi aggiuntivi delle impostazioni dell'app di OpenKeychain. Senza questo permesso la bozza sarà salvata, ma il popup di OpenKeychain per confermare/selezionare potrebbe non comparire.
-FairEmail will send the [Autocrypt](https://autocrypt.org/) header for use by other email clients, but only for signed and encrypted messages because too many email servers have problems with the often long Autocrypt header. Note that the most secure way to start an encrypted email exchange is by sending signed messages first. Received Autocrypt headers will be sent to the OpenKeychain app for storage on verifying a signature or decrypting a message.
+FairEmail invierà l'intestazione di [Autocrypt](https://autocrypt.org/) per l'uso da altri clienti di posta elettronica, ma solo per i messaggi firmati e crittografati perché troppi server di email hanno problemi con l'intestazione spesso lunga di Autocrypt. Nota che il modo più sicuro per avviare lo scambio di email crittografate è inviando i messaggi firmati prima. Le intestazioni ricevute di Autocrypt saranno inviate all'app di OpenKeychain per la memorizzazione alla verifica di una firma o decrittografia di un messaggio.
-All key handling is delegated to the OpenKey chain app for security reasons. This also means that FairEmail does not store PGP keys.
+Tutta le gestione delle chiavi è delegata all'app OpenKeychain per motivi di sicurezza. Questo significa anche che FairEmail non memorizza le chiavi PGP.
-Inline encrypted PGP in received messages is supported, but inline PGP signatures and inline PGP in outgoing messages is not supported, see [here](https://josefsson.org/inline-openpgp-considered-harmful.html) about why not.
+Il PGP crittografato in linea nei messaggi ricevuti è supportato, ma le firme PGP in linea e il PGP in linea nei messaggi in uscita non sono supportati, vedi [qui](https://josefsson.org/inline-openpgp-considered-harmful.html) sul perché non lo sono.
-Signed-only or encrypted-only messages are not a good idea, please see here about why not:
+I messaggi di sola firma o sola crittografia non sono una buona idea, sei pregato di vedere qui perché non lo sono:
* [OpenPGP Considerations Part I](https://k9mail.github.io/2016/11/24/OpenPGP-Considerations-Part-I.html)
* [OpenPGP Considerations Part II](https://k9mail.github.io/2017/01/30/OpenPGP-Considerations-Part-II.html)
* [OpenPGP Considerations Part III Autocrypt](https://k9mail.github.io/2018/02/26/OpenPGP-Considerations-Part-III-Autocrypt.html)
-Signed-only messages are supported, encrypted-only messages are not supported.
+I messaggi solo firmati sono supportati, i messaggi di sola crittografia no.
-Common errors:
+Errori comuni:
* *Nessuna chiave*: non c'è nessuna chiave PGP disponibile per uno degli indirizzi e-mail elencati
* *Chiave mancante per la crittografia*: c'è probabilmente una chiave selezionata in FairEmail che non esiste più nell'applicazione OpenKeychain. Resettare la chiave (vedi sopra) probabilmente risolverà questo problema.
*S/MIME*
-Encrypting a message requires the public key(s) of the recipient(s). Signing a message requires your private key.
+Crittografare un messaggio richiede le chiavi pubbliche dei destinatari. Firmare un messaggio richiede una chiave privata.
-Private keys are stored by Android and can be imported via the Android advanced security settings. There is a shortcut (button) for this in the privacy settings. Android will ask you to set a PIN, pattern, or password if you didn't before. If you have a Nokia device with Android 9, please [read this first](https://nokiamob.net/2019/08/10/a-bug-prevents-nokia-1-owners-from-unlocking-their-screen-even-with-right-pin-pattern/).
+Le chiavi private sono memorizzate da Android e sono importabili tramite le impostazioni di sicurezza avanzate di Android. Esiste una scorciatoia (pulsante) per questo nelle impostazioni della privacy. Android ti chiederà di impostare un PIN, uno schema o una password se non lo hai fatto prima. Se hai un dispositivo Nokia con Android 9, sei pregato di [leggere questo prima](https://nokiamob.net/2019/08/10/a-bug-prevents-nokia-1-owners-from-unlocking-their-screen-even-with-right-pin-pattern/).
-Note that certificates can contains multiple keys for multiple purposes, for example for authentication, encryption and signing. Android only imports the first key, so to import all the keys, the certificate must first be split. This is not very trivial and you are advised to ask the certificate supplier for support.
+Nota che i certificati possono contenere chiavi multiple per scopi multipli, per esempio per l'autenticazione, la crittografia e la firma. Android importa solo la prima chiave, quindi per importarle tutte, il certificato deve prima essere diviso. Questo non è molto banale e ti è consigliato di chiedere supporto al fornitore del certificato.
-Note that S/MIME signing with other algorithms than RSA is supported, but be aware that other email clients might not support this. S/MIME encryption is possible with symmetric algorithms only, which means in practice using RSA.
+Nota che la firma S/MIME con altri algoritmi oltre RSA è supportata, ma sappi che altri client di posta elettronica potrebbero non supportarla. La crittografia S/MIME è possibile solo con algoritmi simmetrici, il che significa in pratica usando RSA.
-The default encryption method is PGP, but the last used encryption method will be remembered for the selected identity for the next time. You might need to enable the send options in the three dots menu again to be able to select the encryption method.
+Il metodo di crittografia predefinito è PGP, ma l'ultimo metodo di crittografia usato sarà ricordato per l'identità selezionata la volta successiva. Potresti dover abilitare di nuovo le opzioni di invio nel menu a tre puntini per poter selezionare il metodo di crittografia.
-To allow different private keys for the same email address, FairEmail will always let you select a key when there are multiple identities with the same email address for the same account.
+Per consentire le differenti chiavi private per lo stesso indirizzo email, FairEmail ti farà sempre selezionare una chiave quando esistono identità multiple con lo stesso indirizzo email per lo stesso profilo.
-Public keys are stored by FairEmail and can be imported when verifying a signature for the first time or via the privacy settings (PEM or DER format).
+Le chiavi pubbliche sono memorizzate da FairEmail e sono importabili quando si verifica una firma per la prima volta o tramite le impostazioni di privacy (formato PEM o DER).
-FairEmail verifies both the signature and the complete certificate chain.
+FairEmail verifica sia la firma che la catena di certificati completa.
-Common errors:
+Errori comuni:
* *No certificate found matching targetContraints*: this likely means you are using an old version of FairEmail
* *unable to find valid certification path to requested target*: basically this means one or more intermediate or root certificates were not found
* *Private key does not match any encryption keys*: the selected key cannot be used to decrypt the message, probably because it is the incorrect key
* *No private key*: no certificate was selected or no certificate was available in the Android keystore
-In case the certificate chain is incorrect, you can tap on the little info button to show the all certificates. After the certificate details the issuer or "selfSign" is shown. A certificate is self signed when the subject and the issuer are the same. Certificates from a certificate authority (CA) are marked with "[keyCertSign](https://tools.ietf.org/html/rfc5280#section-4.2.1.3)". Certificates found in the Android key store are marked with "Android".
+Nel caso in cui la catena del certificato sia scorretta, puoi toccare sul piccolo pulsante delle informazioni per mostrare tutti i certificati. After the certificate details the issuer or "selfSign" is shown. A certificate is self signed when the subject and the issuer are the same. Certificates from a certificate authority (CA) are marked with "[keyCertSign](https://tools.ietf.org/html/rfc5280#section-4.2.1.3)". Certificates found in the Android key store are marked with "Android".
A valid chain looks like this:
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Errore di sintassi – linea troppo lunga* è spesso causata dall'utilizzo di una lunga intestazione Autocrypt
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... non è consentito trasmettere* significa che il server di posta elettronica non riconosce il nome utente/indirizzo email. Si prega di controllare il nome host e il nome utente/indirizzo email nelle impostazioni di identità.
**Gmail errors**
@@ -2697,10 +2698,12 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
-**(157) Come posso configurare un profilo di Free.fr?**
+**(157) How can I set up an Free.fr account?**
Veuillez [voir ici](https://free.fr/assistance/597.html) pour les instructions.
@@ -2711,7 +2714,7 @@ Veuillez [voir ici](http://jc.etiemble.free.fr/abc/index.php/trucs-astuces/confi
-**(158) Quale registratore audio/camera raccomandi?**
+**(158) Which camera / audio recorder do you recommend?**
To take photos and to record audio a camera and an audio recorder app are needed. The following apps are open source cameras and audio recorders:
@@ -2723,7 +2726,7 @@ To record voice notes, etc, the audio recorder needs to support [MediaStore.Audi
-**(159) Cosa sono gli elenchi di protezione del tracciatore di Disconnect?**
+**(159) What are Disconnect's tracker protection lists?**
Please see [here](https://disconnect.me/trackerprotection) for more information about Disconnect's tracker protection lists.
@@ -2747,14 +2750,14 @@ Updating once a week will probably be sufficient, please see [here](https://gith
-**(160) Puoi aggiungere l'eliminazione permanente dei messaggi senza conferma?**
+**(160) Can you add permanent deletion of messages without confirmation?**
Permanent deletion means that messages will *irreversibly* be lost, and to prevent this from happening accidentally, this always needs to be confirmed. Even with a confirmation, some very angry people who lost some of their messages through their own fault contacted me, which was a rather unpleasant experience :-(
-**(161) Puoi aggiungere un'impostazione per modificare il colore primario e di accento?***
+**(161) Can you add a setting to change the primary and accent color?***
If I could, I would add a setting to select the primary and accent color right away, but unfortunately Android themes are fixed, see for example [here](https://stackoverflow.com/a/26511725/1794097), so this is not possible.
diff --git a/docs/FAQ-iw-rIL.md b/docs/FAQ-iw-rIL.md
index 54c32b8b43..4220b1dbbb 100644
--- a/docs/FAQ-iw-rIL.md
+++ b/docs/FAQ-iw-rIL.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-ja-rJP.md b/docs/FAQ-ja-rJP.md
index 69704d96e6..34cb4af3b6 100644
--- a/docs/FAQ-ja-rJP.md
+++ b/docs/FAQ-ja-rJP.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-kk-rKZ.md b/docs/FAQ-kk-rKZ.md
index ba02504f26..e557fe7d65 100644
--- a/docs/FAQ-kk-rKZ.md
+++ b/docs/FAQ-kk-rKZ.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-ko-rKR.md b/docs/FAQ-ko-rKR.md
index 66e614ed23..53a315853a 100644
--- a/docs/FAQ-ko-rKR.md
+++ b/docs/FAQ-ko-rKR.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-lt-rLT.md b/docs/FAQ-lt-rLT.md
index a515a631e8..a89b462244 100644
--- a/docs/FAQ-lt-rLT.md
+++ b/docs/FAQ-lt-rLT.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-nl-rNL.md b/docs/FAQ-nl-rNL.md
index f93dc5f702..f12a857b79 100644
--- a/docs/FAQ-nl-rNL.md
+++ b/docs/FAQ-nl-rNL.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-nn-rNO.md b/docs/FAQ-nn-rNO.md
index 947ff409a3..e720f80acd 100644
--- a/docs/FAQ-nn-rNO.md
+++ b/docs/FAQ-nn-rNO.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-no-rNO.md b/docs/FAQ-no-rNO.md
index e026f84221..b834e82410 100644
--- a/docs/FAQ-no-rNO.md
+++ b/docs/FAQ-no-rNO.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-pl-rPL.md b/docs/FAQ-pl-rPL.md
index e5ca46f4bb..73fd227866 100644
--- a/docs/FAQ-pl-rPL.md
+++ b/docs/FAQ-pl-rPL.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* jest często spowodowany użyciem długiego nagłówka Autocrypt
* *503 5.5.0 Recipient already specified* przeważnie oznacza, że adres jest używany zarówno jako adres DO, jak i DW
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-pt-rBR.md b/docs/FAQ-pt-rBR.md
index 7af000b41e..7f5dd99077 100644
--- a/docs/FAQ-pt-rBR.md
+++ b/docs/FAQ-pt-rBR.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-pt-rPT.md b/docs/FAQ-pt-rPT.md
index 5f8aef1049..9ff72f4dea 100644
--- a/docs/FAQ-pt-rPT.md
+++ b/docs/FAQ-pt-rPT.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-ro-rRO.md b/docs/FAQ-ro-rRO.md
index cb05e62942..0ee53267b8 100644
--- a/docs/FAQ-ro-rRO.md
+++ b/docs/FAQ-ro-rRO.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-ru-rRU.md b/docs/FAQ-ru-rRU.md
index a80eb26edb..5de9224726 100644
--- a/docs/FAQ-ru-rRU.md
+++ b/docs/FAQ-ru-rRU.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Синтаксическая ошибка - строка слишком длинная* часто вызвана длинным заголовком Autocrypt
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... пересылка запрещена* означает, что почтовый сервер не распознает имя пользователя/адрес электронной почты. Пожалуйста, проверьте имя хоста и имя пользователя/адрес электронной почты в настройках идентификатора.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-sk-rSK.md b/docs/FAQ-sk-rSK.md
index c8d79d3741..8f493d5a10 100644
--- a/docs/FAQ-sk-rSK.md
+++ b/docs/FAQ-sk-rSK.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-sl-rSI.md b/docs/FAQ-sl-rSI.md
index 9fd89d27d1..2bcaed072f 100644
--- a/docs/FAQ-sl-rSI.md
+++ b/docs/FAQ-sl-rSI.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-sr-rSP.md b/docs/FAQ-sr-rSP.md
index 02ade77315..0643e10ae7 100644
--- a/docs/FAQ-sr-rSP.md
+++ b/docs/FAQ-sr-rSP.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-sv-rSE.md b/docs/FAQ-sv-rSE.md
index 47c95cbce8..230c461910 100644
--- a/docs/FAQ-sv-rSE.md
+++ b/docs/FAQ-sv-rSE.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Mottagare som redan angivits* innebär oftast att en adress används både som TO och CC-adress
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+Om du har aktiverat *säkerhetsstandard* i din organisation kan du behöva aktivera SMTP AUTH-protokollet. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-tr-rTR.md b/docs/FAQ-tr-rTR.md
index 4989b99b7c..6e37496a02 100644
--- a/docs/FAQ-tr-rTR.md
+++ b/docs/FAQ-tr-rTR.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-uk-rUA.md b/docs/FAQ-uk-rUA.md
index 458af86edd..9b57075247 100644
--- a/docs/FAQ-uk-rUA.md
+++ b/docs/FAQ-uk-rUA.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-vi-rVN.md b/docs/FAQ-vi-rVN.md
index e23d8385c2..7edc456d3b 100644
--- a/docs/FAQ-vi-rVN.md
+++ b/docs/FAQ-vi-rVN.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-zh-rCN.md b/docs/FAQ-zh-rCN.md
index 7d2280f539..98a174a477 100644
--- a/docs/FAQ-zh-rCN.md
+++ b/docs/FAQ-zh-rCN.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+
diff --git a/docs/FAQ-zh-rTW.md b/docs/FAQ-zh-rTW.md
index 1e113eced8..e3a23dc567 100644
--- a/docs/FAQ-zh-rTW.md
+++ b/docs/FAQ-zh-rTW.md
@@ -901,6 +901,7 @@ SMTP servers can reject messages for [a variety of reasons](https://en.wikipedia
* *554 5.7.1 Service unavailable; Client host xxx.xxx.xxx.xxx blocked*, please [see here](https://docs.gandi.net/en/gandimail/faq/error_types/554_5_7_1_service_unavailable.html)
* *501 Syntax error - line too long* is often caused by using a long Autocrypt header
* *503 5.5.0 Recipient already specified* mostly means that an address is being used both as TO and CC address
+* *554 5.7.1 ... not permitted to relay* means that the email server does not recognize the username/email address. Please double check the host name and username/email address in the identity settings.
**Gmail errors**
@@ -2697,6 +2698,8 @@ An Office 365 account can be set up via the quick setup wizard and selecting *Of
If the wizard ends with *AUTHENTICATE failed*, IMAP and/or SMTP might be disabled for the account. In this case you should ask the administrator to enable IMAP and SMTP. The procedure is documented [here](https://docs.microsoft.com/en-in/exchange/troubleshoot/configure-mailboxes/pop3-imap-owa-activesync-office-365).
+If you've enabled *security defaults* in your organization, you might need to enable the SMTP AUTH protocol. Please [see here](https://docs.microsoft.com/en-us/exchange/clients-and-mobile-in-exchange-online/authenticated-client-smtp-submission) about how to.
+